ceramic exhaust?
- tk11b40
-
- Offline
- User
-

Registered
- Posts: 626
- Thanks: 21
Re: ceramic exhaust?
05 Dec 2007 20:54
HEY,
I am new to all this, but i can tel you there is an outfit in Seattle Washington, run by bike people. They do s real nice job. The Racers use the company, I wish I could remember the name. Anyway, the real difference, is they are riders, they will do car stuff, but stick to bikes. They must do well because they sponsor plenty of riders at the track.
Car guys are happy with all kinds of junk, bikes are different. Soo if you send your stuff to a car outfit, you get car results.
I would be willing to pay 200-250 if the pipe turned out well. Prep is everything. Rust will stay under the coating, and eventually work to the surface.
I am planning on sending the pipe for my KZ in, but I know if I don't do the prep work, some kid making 10 bucks an hour will blast it, while listening to an Ipod.
If i remember correctly it was about 275 in Seattle last time I checked. My last bike (CBR 900RR)pipe was coated by the Seattle company, it help up well for ten years.
Goos luck.
Cowboy..out.
I am new to all this, but i can tel you there is an outfit in Seattle Washington, run by bike people. They do s real nice job. The Racers use the company, I wish I could remember the name. Anyway, the real difference, is they are riders, they will do car stuff, but stick to bikes. They must do well because they sponsor plenty of riders at the track.
Car guys are happy with all kinds of junk, bikes are different. Soo if you send your stuff to a car outfit, you get car results.
I would be willing to pay 200-250 if the pipe turned out well. Prep is everything. Rust will stay under the coating, and eventually work to the surface.
I am planning on sending the pipe for my KZ in, but I know if I don't do the prep work, some kid making 10 bucks an hour will blast it, while listening to an Ipod.
If i remember correctly it was about 275 in Seattle last time I checked. My last bike (CBR 900RR)pipe was coated by the Seattle company, it help up well for ten years.
Goos luck.
Cowboy..out.
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
1986 Yamaha FZ 750
Ducati S4R
Husqvarna FE 350s
1986 Yamaha FZ 750
Please Log in or Create an account to join the conversation.
- inline4
-
- Offline
- User
-

Registered
- Posts: 224
- Thanks: 1
Re: ceramic exhaust?
06 Dec 2007 06:05
My pipe looks great,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,hanging in my garage.
Although close, I still don't have my project running yet so I don't know how well it will hold up under use.
My guy feeling is that it will be fine. The coating is tough as nails.
Post edited by: KZCSI, at: 2007/12/08 15:49
Although close, I still don't have my project running yet so I don't know how well it will hold up under use.
My guy feeling is that it will be fine. The coating is tough as nails.
Post edited by: KZCSI, at: 2007/12/08 15:49
Please Log in or Create an account to join the conversation.
- Bad Kaw
-
- Offline
- User
-

Registered
- Flying Squirell
- Posts: 1750
- Thanks: 13
Re: ceramic exhaust?
06 Dec 2007 10:59
I've had two experiences with JettHott. One was the spider pipe/collector on a turbo bike and the other was the 4-into-1 (collector only) off a Kerker. Both experiences were fine, black coating (3 years ago on the turbo, 1.5 on the Kerker) on each. The turbo bike is now down-the-road with its new owner and is doing fine...looks great, really. And the Kerker hasn't gone on the bike (shame on me), yet. I prepped my own pipes with glass-bead media blasting; and I have had nothing to complain about. I suspect that - as noted by the earlier poster - the key may be in the prep work, much like painting. The prices are what is surprising me, it was $150 for the turbo collector spider pipe, and it was $150 for the 4-into-1 collector (only). I went thru a friend's shop, so maybe I got a "deal", but I'm normally aware of hook-ups when they are given to me and I like to show appreciation. Maybe I got a dealer discount or something??? Anyway, I thought it was a tad pricey then...but now after listening to you guys...maybe I got a deal, eh?
At any rate, no complaints from me; additionally I have two friends who run turbo bikes (Suzukis, so they don't count;) ) and they both got their collector spider pipes coated by JettHott and no problems there, either. I prepped one of those guys's pipe and I didn't prep the other one (the one I didn't prep stays in a heated garage).
On the "my thoughts" frontier, I'm with sean30306: WG, you tell us what it's going to cost. And I'm getting ready to do a full Kerker pipe off my ELR clone, so I am an interested party looking at February for my pipe conditioning.
Post edited by: Bad Kaw, at: 2007/12/06 14:03
At any rate, no complaints from me; additionally I have two friends who run turbo bikes (Suzukis, so they don't count;) ) and they both got their collector spider pipes coated by JettHott and no problems there, either. I prepped one of those guys's pipe and I didn't prep the other one (the one I didn't prep stays in a heated garage).
On the "my thoughts" frontier, I'm with sean30306: WG, you tell us what it's going to cost. And I'm getting ready to do a full Kerker pipe off my ELR clone, so I am an interested party looking at February for my pipe conditioning.
Post edited by: Bad Kaw, at: 2007/12/06 14:03
78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: ceramic exhaust?
10 Mar 2008 12:07
I'm searching my area, Southern Ontario, for an exhaust Ceramic Coater. I've got a few I'm looking at.
I'll let you know the costs involved.
I'll let you know the costs involved.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
- Jack
-
- Offline
- User
-

Registered
- Posts: 691
- Thanks: 7
Re: ceramic exhaust?
12 Mar 2008 06:29
rstnick wrote:
Best one I've found is just outside Windsor in Ruscom, Ontario.
High Tech Coatings ,ask for Rick.888-225-8648.
Top notch work & service.
I'm searching my area, Southern Ontario, for an exhaust Ceramic Coater. I've got a few I'm looking at.
I'll let you know the costs involved.
Best one I've found is just outside Windsor in Ruscom, Ontario.
High Tech Coatings ,ask for Rick.888-225-8648.
Top notch work & service.
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: ceramic exhaust?
12 Mar 2008 06:41
I've got my pipe in at The Edge Custom Coatings at the moment.
Getting it Powder Coated, High Heat to 1000 Degree, not sure if that's F or C.
I'll let you know how it turns out.
The Edge Custom Coating
210 Pony Dr. Unit 4
Newmarket ON.
905-868-4970
Getting it Powder Coated, High Heat to 1000 Degree, not sure if that's F or C.
I'll let you know how it turns out.
The Edge Custom Coating
210 Pony Dr. Unit 4
Newmarket ON.
905-868-4970
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: ceramic exhaust?
13 Mar 2008 20:22
I sent my exhaust out to be high heat powder coated, good to a heat of 1000*F.
Got it back today.
The pipes are pitted in some areas, as the rust was pritty bad. I made some crude attempts to paint it over the years, and decided to do it this way to prolong it's life. Never noticed that dent in pipe #2. Guess the rust helped hide it.
Cost me $200.
Before:
After:
On bike:
Got it back today.
The pipes are pitted in some areas, as the rust was pritty bad. I made some crude attempts to paint it over the years, and decided to do it this way to prolong it's life. Never noticed that dent in pipe #2. Guess the rust helped hide it.
Cost me $200.
Before:
After:
On bike:
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: ceramic exhaust?
14 Mar 2008 04:51 - 14 Mar 2008 05:21
I would not mind paying $130 to coat an exhaust system. $200 would be about the upper limit and I would have to give it some thought. $130 I would pay with out batting an eylash. That is provided, that I do the prep work and that the pipe is ready to spray. I did do some sesearch nad the prices are between $120 and $160 for a bike 4-1 header at most places. Some guys do charge outrageoud prices though.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 14 Mar 2008 05:21 by otakar.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: ceramic exhaust?
14 Mar 2008 08:28
check the local powder coater,most of them have a process for coating headers;)
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- riverroad
-
- Offline
- User
-

Registered
- 1980 1000LTD B4
- Posts: 842
- Thanks: 7
Re: ceramic exhaust?
14 Mar 2008 09:53
I was thinking about having mine done in something called Cermachrome.
www.jcmmachine.com/
Looks like polished aluminum supposedly. He quoted me a price of $175.
OR, there's a regular powder coater just down the road from me that will do mine in gloss black for $65.
Decisions decisions...
Looks like polished aluminum supposedly. He quoted me a price of $175.
OR, there's a regular powder coater just down the road from me that will do mine in gloss black for $65.
Decisions decisions...
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: ceramic exhaust?
14 Mar 2008 16:13
seanof30306 wrote:
Because MAC is junk.
By the way, why is the Kerker so much more expensive than the Mac?
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: ceramic exhaust?
14 Mar 2008 19:10
I would'nt say that; I have had both MAC and Kerker, and I like MAC much better. Especially the sound. It is the closest to the old oryginal Yosi. mini pipe that I have on my Z1-R.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
