650/750 head interchangeability?

  • kxhonda
  • kxhonda's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 79
  • Thanks: 0

Re: 650/750 head interchangeability?

12 Mar 2008 18:48
#199823
I have my 650 cylinder and 750 cylinder sitting on the work bench right now. I can measure them both when I get off work in the morning.
1977 Kz650B1 #576th made.

Warsaw, In

Please Log in or Create an account to join the conversation.

  • kxhonda
  • kxhonda's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 79
  • Thanks: 0

Re: 650/750 head interchangeability?

14 Mar 2008 05:01
#200004
The OD of the 650 sleeves is 2.696" and the bore on the 750 cylinders is around 2.597". That leaves ya about a .050" wall thickness. I'm not sure how thin is too thin though.
1977 Kz650B1 #576th made.

Warsaw, In

Please Log in or Create an account to join the conversation.

  • agawam
  • agawam's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 327
  • Thanks: 1

Re: 650/750 head interchangeability?

15 Mar 2008 07:04
#200112
I have a spare 78 650 head, in fact I have two complete 78 650 engines plus parts from another, and I will part with them, one is seized from sitting the other was a running engine, both have carbs intact and a spare head sittin on my bench

Please Log in or Create an account to join the conversation.

  • Bluemeanie
  • Bluemeanie's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2516
  • Thanks: 15

Re: 650/750 head interchangeability?

15 Mar 2008 07:42
#200123
From what I've heard, the big bore kits for the 650 go to 720. That tells me that you cannot bore a stock 650 to 750? I think the 720 kits are hard to find and most kits are now 700?
1980 KZ650F1, Bought new out the door for $2,162.98!

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: 650/750 head interchangeability?

15 Mar 2008 08:50
#200133
It's not that you "can't" bore a 650 to a 750 (actually 738), it's just that you are going to have a serious problem with ring seal if you do.

.050" liner thickness is just not enough for a reliable street bike.

It may be possible to bore a 81 or newer 650 to the 750 size, but I don't know because no one has posted the wall thickness of a stock 81 or newer 650.
KD9JUR

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum