Engine Just Blew??
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Engine Just Blew??
12 Oct 2008 16:19 - 12 Oct 2008 16:22
steell wrote:
I know, I watched the oil blowing out of mine when the gasket cracked....
The KZ twins do pressurize the crankcase, then create a vacuum, because both pistons move up and down together.
1979 KZ-750 Twin
Last edit: 12 Oct 2008 16:22 by bountyhunter.
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Engine Just Blew??
13 Oct 2008 07:07 - 13 Oct 2008 07:10
You could try a little rtv silicone on the motor side of the gasket to hold it in place.
The blow by will improve as the rings seat.
But the fact is as u increase cc's u are going to get more blow by.
As the ring start to where as u increase mileage the blow by will again , increase. the added crankcase pressure will increase the likelihood of oil leaks.
Do yourself a favor and increase the crankcase venting now.
There are a few dif ways, Kick start hole ,added vent on cam cover, oil fill hole. I chose to increase the capacity of the stock unit. Hear is a link to my project , it shows my added vents.
Pg, 5,6.
If u want to go with the kick start hole, i will give u the parts and filter .
kzrider.com/index.php?option=com_kunena&...mit=20&limitstart=80
The blow by will improve as the rings seat.
But the fact is as u increase cc's u are going to get more blow by.
As the ring start to where as u increase mileage the blow by will again , increase. the added crankcase pressure will increase the likelihood of oil leaks.
Do yourself a favor and increase the crankcase venting now.
There are a few dif ways, Kick start hole ,added vent on cam cover, oil fill hole. I chose to increase the capacity of the stock unit. Hear is a link to my project , it shows my added vents.
Pg, 5,6.
If u want to go with the kick start hole, i will give u the parts and filter .
kzrider.com/index.php?option=com_kunena&...mit=20&limitstart=80
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 13 Oct 2008 07:10 by mark1122.
Please Log in or Create an account to join the conversation.
- 79MKII
-
Topic Author
- Offline
- User
-

Registered
- Love Them Kaws!
- Posts: 2478
- Thanks: 44
Re: Engine Just Blew??
13 Oct 2008 19:49
I don't know how I missed that thread - excellent looking bike! I think I'll pass on the kick vent but thanks. Your ticket has scared me away from that one! I never would have guessed you could get a ticket for that. What a crock. Thanks for the breather tips. I think more venting is in order. Problem is, I put my starter back in and I like it!
Does anyone know (maybe ape jay??) if the APE low profile cover vents more pressure than the factory kz breather? I'd be willing to go back to it and run a hose to the back of the bike if it would help. I only took it off because it was spewing oil out of the filter on the end of a short hose.
Does anyone know (maybe ape jay??) if the APE low profile cover vents more pressure than the factory kz breather? I'd be willing to go back to it and run a hose to the back of the bike if it would help. I only took it off because it was spewing oil out of the filter on the end of a short hose.
The Kaw List:
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Engine Just Blew??
13 Oct 2008 20:29
79MKII wrote:
I once got a ticket for having a smudged driver's license.... not license plate, driver's license. I wanted to ask the little dork how he could see that with it being in my wallet and all... but figured I would be wearing a flashlight handle if I did.
Your ticket has scared me away from that one! I never would have guessed you could get a ticket for that. What a crock.
I once got a ticket for having a smudged driver's license.... not license plate, driver's license. I wanted to ask the little dork how he could see that with it being in my wallet and all... but figured I would be wearing a flashlight handle if I did.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Engine Just Blew??
14 Oct 2008 13:06
The APE low profile cover will not provide enough venting.They prevent venting, and alternative venting is expected to be used. Like the starter hole.That is my understanding. I read a post here somewhere ,where the user went the ape route and it caused oil leaks.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- 79MKII
-
Topic Author
- Offline
- User
-

Registered
- Love Them Kaws!
- Posts: 2478
- Thanks: 44
Re: Engine Just Blew??
14 Oct 2008 15:37 - 14 Oct 2008 15:38
The A.P.E. breathers are available in vented and non-vented versions. I got the vented version and it has a fitting on it. It seems like it would vent more since there are no baffles at all, just a straight through vent. The picture below was my original set up and it shot oil out of the filter onto the engine. I'm thinking this set up with a much longer hose might have less pressure than the stock breather with the internal baffling. Could be? Maybe?
The Kaw List:
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250
Last edit: 14 Oct 2008 15:38 by 79MKII. Reason: forgot picture! duh!
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Engine Just Blew??
14 Oct 2008 17:17
Per FSM, the oil breather serves two functions: (1) minimize pressure variations from piston and crankshaft movement, and (2) recycle blowby gas from combustion chambers to keep it from contaminating the engine oil.
The maze in the breather supposedly separates most of the blowby gas from the oil mist, allowing the oil to return to the crankcase and the gas to be drawn through the breather hose into the air cleaner housing and back through the carb intake.
Perhaps without the baffles, the oil mist and gas blowby could both be expelled to the atmosphere without any separation involved (to EPA's horror).
Good Luck!
The maze in the breather supposedly separates most of the blowby gas from the oil mist, allowing the oil to return to the crankcase and the gas to be drawn through the breather hose into the air cleaner housing and back through the carb intake.
Perhaps without the baffles, the oil mist and gas blowby could both be expelled to the atmosphere without any separation involved (to EPA's horror).
Good Luck!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Engine Just Blew??
15 Oct 2008 15:12
Patton wrote:
I agree .the baffles are important to separate and return the oil to the case. U also need a larger vent to reduce the presure. Larger vent tube = less velosity, more volume.Per FSM, the oil breather serves two functions: (1) minimize pressure variations from piston and crankshaft movement, and (2) recycle blowby gas from combustion chambers to keep it from contaminating the engine oil.
The maze in the breather supposedly separates most of the blowby gas from the oil mist, allowing the oil to return to the crankcase and the gas to be drawn through the breather hose into the air cleaner housing and back through the carb intake.
Perhaps without the baffles, the oil mist and gas blowby could both be expelled to the atmosphere without any separation involved (to EPA's horror).
Good Luck!
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Engine Just Blew??
15 Oct 2008 18:18
Out of curiosity, how long should the tubing be (OEM) to the filter?
I have the OEM breather but the hose is nor more than 3" in length to the filter...
I looked this up at Babbit.com but they don't show this hose and filter in the fiche files.
OMR
I have the OEM breather but the hose is nor more than 3" in length to the filter...
I looked this up at Babbit.com but they don't show this hose and filter in the fiche files.
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Engine Just Blew??
15 Oct 2008 18:35
i always just run a piece of clear vinyl hose up under battery box then loop it back down to keep water out,no need to install a filter
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Engine Just Blew??
16 Oct 2008 04:14 - 16 Oct 2008 04:34
Old Man Rock wrote:
It's an "S" shaped hose from top of vent to bottom of air box.
Here's the image from Kawasaki.com
[Click on image to enlarge view]
Out of curiosity, how long should the tubing be (OEM) to the filter?
I have the OEM breather but the hose is nor more than 3" in length to the filter...
I looked this up at Babbit.com but they don't show this hose and filter in the fiche files.
OMR
It's an "S" shaped hose from top of vent to bottom of air box.
Here's the image from Kawasaki.com
[Click on image to enlarge view]
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 16 Oct 2008 04:34 by Patton.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Engine Just Blew??
16 Oct 2008 05:26
Ah crap, thanks Patton...
I saw that but didn't put the two together. This old girl didn't come with the OEM air cleaner... DOH! Actually, didnt come with pods either.
Learn something new everyday, have to love it. Maybe some day when I'm old and gray and I'll actually know something about these old monsters. LOL!
Kudos...
OMR
I saw that but didn't put the two together. This old girl didn't come with the OEM air cleaner... DOH! Actually, didnt come with pods either.
Learn something new everyday, have to love it. Maybe some day when I'm old and gray and I'll actually know something about these old monsters. LOL!
Kudos...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
