Drag Pipes
- mumbles
-
- Offline
- User
-

Registered
- Let's do it...
- Posts: 64
- Thanks: 0
Re: Drag Pipes
08 Jan 2009 05:14
Thanks for posting up the jet sizes. Gives us an idea where to start with similar setups.
What did you use for back-pressure?
What did you use for back-pressure?
2001 KZ1000 Police
1998 Vulcan 800
Houston, Tx
1998 Vulcan 800
Houston, Tx
Please Log in or Create an account to join the conversation.
- kzkx
-
- Offline
- User
-

Registered
- Posts: 16
- Thanks: 0
Re: Drag Pipes
08 Jan 2009 16:27
mitch.dail... It has stock headers. When you cut the stock exhaust you have to be care full if you want to keep the baffles. They are pretty close to the outside edge. I used a sawzall. I started the 2" pipes after the H pipe that goes under the bike. It was right before the stock shield ended so I could cover up the joint.
mumbles... I drilled a hole in the bottom of the exhaust pipe about two inches in on the bottom. Then I welded a washer that was a little smaller diameter to my pipe onto a bolt. Then I bolted it down. I saw this on a guys Harley and he said he can turn it to increase or decrease the back pressure. Sounded good to me.
I can post pics later if wanted...
mumbles... I drilled a hole in the bottom of the exhaust pipe about two inches in on the bottom. Then I welded a washer that was a little smaller diameter to my pipe onto a bolt. Then I bolted it down. I saw this on a guys Harley and he said he can turn it to increase or decrease the back pressure. Sounded good to me.
I can post pics later if wanted...
81 XS 400 Cafe Project
82 Seca 400
83 KZ 750 LTD
83 KZ 750 Hardtail
98 YZF 600R gone
OKC, OK
82 Seca 400
83 KZ 750 LTD
83 KZ 750 Hardtail
98 YZF 600R gone
OKC, OK
Please Log in or Create an account to join the conversation.
- kzkx
-
- Offline
- User
-

Registered
- Posts: 16
- Thanks: 0
Re: Drag Pipes
08 Jan 2009 16:36
Oh ya... I was going to mention that I have not checked my plugs yet to see how she is running. I plan to do that Saturday morn. Then I'll see how close I am, but at least I'm closer than I was:cheer:
81 XS 400 Cafe Project
82 Seca 400
83 KZ 750 LTD
83 KZ 750 Hardtail
98 YZF 600R gone
OKC, OK
82 Seca 400
83 KZ 750 LTD
83 KZ 750 Hardtail
98 YZF 600R gone
OKC, OK
Please Log in or Create an account to join the conversation.
- franknsr
-
- Offline
- User
-

Registered
- Posts: 215
- Thanks: 0
Re: Drag Pipes
08 Jan 2009 20:40
kzkx, you running any baffles at all? I ended up putting two sets in my single 2" pipe to keep the sound down to a low roar.
My brother has a sportster with straight pipes and he did the washer trick your talking about. Made just enough back pressure to make the bike run nice.
My brother has a sportster with straight pipes and he did the washer trick your talking about. Made just enough back pressure to make the bike run nice.
Formerly CSRchopper
1991 KZ1000P
Gone but not forgotten
1986 ZG1000
1982 650 CSR -shoulda kept this one-
Lisle Illinois, USA
1991 KZ1000P
Gone but not forgotten
1986 ZG1000
1982 650 CSR -shoulda kept this one-
Lisle Illinois, USA
Please Log in or Create an account to join the conversation.
- kzkx
-
- Offline
- User
-

Registered
- Posts: 16
- Thanks: 0
Re: Drag Pipes
09 Jan 2009 05:56
Ya I put some 4" baffles and I opened the end up on them. Ya they are kinda loud, but not to the point where they are annoying. The sound is different though.
81 XS 400 Cafe Project
82 Seca 400
83 KZ 750 LTD
83 KZ 750 Hardtail
98 YZF 600R gone
OKC, OK
82 Seca 400
83 KZ 750 LTD
83 KZ 750 Hardtail
98 YZF 600R gone
OKC, OK
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
