Engine seized up

  • kzz1p
  • kzz1p's Avatar
  • Offline
  • User
  • User
    Registered
  • One Test Is Worth A Thousand Expert Opinions!
  • Posts: 1432
  • Thanks: 3

Re: Engine seized up

28 Feb 2009 18:06
#268763
kawsakiman wrote:
one good thing is i know myself, along with a lot of other members have everything you need to help you rebuild her so you don't have to search e-bay forever.
i'm almost sure i have a crank i can let you have.
i know i have cases.
sounds like a good time to go to www.kzzone.com
and buy a 700cc kit.
if you have to do it anyway, might as well go bigger and do it right.
plus they have added 650/750 cams to their lineup. good stuff!
sucks you have to do this now but man, i've been in your shoes before i heard of this sight.

no fear, just a little set back. we will walk you through it.

NOTE:
Kawasakiman you are a good example of the type of people that we have on this site. You are willing to help others, share what you know and inspire other
people. Thank you for openly sharing your kindness!

Please Log in or Create an account to join the conversation.

  • eaglecrash2
  • eaglecrash2's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 87
  • Thanks: 0

Re: Engine seized up

03 Mar 2009 19:28
#269511
Thanks kawsakiman, work is kind of slow and we are asked to take vacation days whenever possible so yes I'm going to have time and yes I will be asking a lot of questions. 700? Hmmn...i kindo like the idea....thanks. will check out the site.
'77 kz650,'06 Vulcan 500ltd, '07 ducati 1098s, '03 bmw m3, '85 carrera, '71 911s, '06 s2000, '03 suburban, '76 triumph TR6
sold: '69 honda 250, yr(?) 50cc honda moped, '52 Beechcraft Bonanza
Long Beach, California

Please Log in or Create an account to join the conversation.

  • BSKZ650
  • BSKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2061
  • Thanks: 14

Re: Engine seized up

04 Mar 2009 05:42
#269570
I think I have a good lower end from a 78 650, if you want I can look in the shop to see for sure
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob

Please Log in or Create an account to join the conversation.

  • z19OO
  • z19OO's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 238
  • Thanks: 3

Re: Engine seized up

04 Mar 2009 07:56
#269615
That sucks but good thing no one got hurt. I would look for a replacement motor 650 or 750. They can be had for cheap.......
1975 z1 900
1979 kz650b

Please Log in or Create an account to join the conversation.

  • zombiescustoms
  • zombiescustoms's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 128
  • Thanks: 0

Re: Engine seized up

04 Mar 2009 10:03
#269636
This is a good reason to run synthetic oil, I have a 74 ford bronco that broke the oil pump shaft while off-roading and I had to drive it out with no oil pressure because no one could get to me, ended up dropping the pan and the pump, replaced the shaft and put her back together and it fired up and has run fine, now I did not run it to the point of seizing but it was close(had to drive about 2 miles of up hill rocky terrain to get back to where I could get a tow with no oil pressure at all) but I think the only thing that saved this motor was the synthetic oil I had just put in it. Like others have said, if you can get it to turn over fill it up and see if it will run. Marvel Mystery Oil is good for un-sticking stuck motors

1979 KZ1000 drag/street fighter
1015cc stock internals for now, 39 flattys, GSXR frontend, ZX9 rear wheel with 6 over chromoly arm, just a budget beater!

Please Log in or Create an account to join the conversation.

  • riverroad
  • riverroad's Avatar
  • Offline
  • User
  • User
    Registered
  • 1980 1000LTD B4
  • Posts: 842
  • Thanks: 7

Re: Engine seized up

04 Mar 2009 10:34 - 04 Mar 2009 10:39
#269638
Don't these motors have ball bearing cranks? If so, then I'd think it's just the rings, and possibly some scuffed cam lobes at the most. No need to split the cases.

Aha, sorry, didn't see Ganes answer above.
Last edit: 04 Mar 2009 10:39 by riverroad.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Engine seized up

04 Mar 2009 13:49 - 04 Mar 2009 13:54
#269670
zombiescustoms wrote:
This is a good reason to run synthetic oil, I have a 74 ford bronco that broke the oil pump shaft while off-roading and I had to drive it out with no oil pressure because no one could get to me, ended up dropping the pan and the pump, replaced the shaft and put her back together and it fired up and has run fine, now I did not run it to the point of seizing but it was close(had to drive about 2 miles of up hill rocky terrain to get back to where I could get a tow with no oil pressure at all) but I think the only thing that saved this motor was the synthetic oil I had just put in it. Like others have said, if you can get it to turn over fill it up and see if it will run. Marvel Mystery Oil is good for un-sticking stuck motors

My 86 Dodge had the worthless 2.2L engine and chose to blow it's head gasket on the freeway at 1AM 50 miles from home (so I kept driving). It blew all the water out and the temp gauge went completely off the dial. When I got home I lifted the hood and the engine was so hot I couldn't get near it.

Synthetic oil saved that engine as well, it had no damage other than the head gasket.
1979 KZ-750 Twin
Last edit: 04 Mar 2009 13:54 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • eaglecrash2
  • eaglecrash2's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 87
  • Thanks: 0

Re: Engine seized up

04 Mar 2009 14:26
#269675
Thanks guys. I did use synthetic oil like I always do in all my vehicles. I'm not going to know what is broken or what need replacement until i tear it down bit by bit. I just bought engine degreaser so i can clean the outside of the bike this weekend. I 'll do some reading (bike manual) too...just getting myself ready. I really apprciate all the responses and support. You folks are just sooooo fine! I'll post my findings asap.
'77 kz650,'06 Vulcan 500ltd, '07 ducati 1098s, '03 bmw m3, '85 carrera, '71 911s, '06 s2000, '03 suburban, '76 triumph TR6
sold: '69 honda 250, yr(?) 50cc honda moped, '52 Beechcraft Bonanza
Long Beach, California

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: Engine seized up

04 Mar 2009 16:12
#269688
good luck man...

Please Log in or Create an account to join the conversation.

  • eaglecrash2
  • eaglecrash2's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 87
  • Thanks: 0

Re: Engine seized up

07 Mar 2009 18:56
#270290
I cleaned up the exterior of the bike with biodegradable degreaser and the oil lines are fine so some thing internal must have failed. There is lots of oil in the exhaust pipe. The engine can no longer be turned over so it's seized up.
Question 1: can the engine be disassembled all the way to the crankshaft while still mounted on the bike?
Question 2: is there a company that sells complete engine? Like the 700cc? Thanks folks
'77 kz650,'06 Vulcan 500ltd, '07 ducati 1098s, '03 bmw m3, '85 carrera, '71 911s, '06 s2000, '03 suburban, '76 triumph TR6
sold: '69 honda 250, yr(?) 50cc honda moped, '52 Beechcraft Bonanza
Long Beach, California

Please Log in or Create an account to join the conversation.

  • kzz1p
  • kzz1p's Avatar
  • Offline
  • User
  • User
    Registered
  • One Test Is Worth A Thousand Expert Opinions!
  • Posts: 1432
  • Thanks: 3

Re: Engine seized up

07 Mar 2009 19:59
#270306
eaglecrash2 wrote:
I cleaned up the exterior of the bike with biodegradable degreaser and the oil lines are fine so some thing internal must have failed. There is lots of oil in the exhaust pipe. The engine can no longer be turned over so it's seized up.
Question 1: can the engine be disassembled all the way to the crankshaft while still mounted on the bike?
Question 2: is there a company that sells complete engine? Like the 700cc? Thanks folks

The engine must be removed to split the cases for the crank to come out. Oil in the exhaust pipe just might tell a different story. Maybe you broke something else in the motor, thats why it locked up. Your problem might not be as bad as you are thinking.

Please Log in or Create an account to join the conversation.

  • eaglecrash2
  • eaglecrash2's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 87
  • Thanks: 0

Re: Engine seized up

20 Mar 2009 08:25
#273681
Just an update here:
I started to remove the top end and so far I'd removed the cylinder head. The overhead cams and bearings surfaces look shinny and smooth. All valves are still in its place and appear normal except the 3rd one is more whitish in color. I can see the top of all piston heads and all in good shape(nothing cracked or broken). All has hardened black soot/carbon which i think is normal? I'll be removing the cylinder this weekend. The engine however still cannot be turned over using the kickstarter lever. I'll also be removing the rest of the engine of off the frame to split the cases.
'77 kz650,'06 Vulcan 500ltd, '07 ducati 1098s, '03 bmw m3, '85 carrera, '71 911s, '06 s2000, '03 suburban, '76 triumph TR6
sold: '69 honda 250, yr(?) 50cc honda moped, '52 Beechcraft Bonanza
Long Beach, California

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum