that's some head!

  • kzz1p
  • kzz1p's Avatar
  • Offline
  • User
  • User
    Registered
  • One Test Is Worth A Thousand Expert Opinions!
  • Posts: 1432
  • Thanks: 3

Re: that's some head!

29 Mar 2009 22:44
#276663
APE Jay wrote:
The head in the photo is a Vance and Hines Suzuki Pro stock head. Ward makes one like it called the Vrotex II which we sell. They make it for both the Suzuki and kawasaki.
These heads have the valve angles spread so they can get 46/38mm valves in it.

This means they can only be used with 85 mm bores. We did one kawasaki at 84, but the intake valve pocket on thew piston almost went into the top ring land.

These heads could not be used on the street because the ports are so large that the motors won't hardly run under 8000 rpm. Racers using these heads leave at 10,000 and shift at 13,000. Valve springs are good for the entire weekend.

Jay

Jay what does that head flow? Do you have any numbers? What is the cost?

Please Log in or Create an account to join the conversation.

  • kzz1p
  • kzz1p's Avatar
  • Offline
  • User
  • User
    Registered
  • One Test Is Worth A Thousand Expert Opinions!
  • Posts: 1432
  • Thanks: 3

Re: that's some head!

29 Mar 2009 22:50
#276664
531blackbanshee wrote:
ports big enough to walk through!

here is what the fellow said about it.

REPLIKAMASCHINEN HEADWORK REVEALED-- A few pictures of the old style PSM 1550 cylinder head that I had been working on. I have flow tested, re-contoured, installed new guides and cut new seats, etc.

--Don



leon holmes

Please Log in or Create an account to join the conversation.

  • PLUMMEN
  • PLUMMEN's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7983
  • Thanks: 104

Re: that's some head!

29 Mar 2009 22:59
#276665
i think thats deadlate Don B)
Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: that's some head!

30 Mar 2009 05:29
#276682
PLUMMEN wrote:
i think thats deadlate Don B)
\

That's the first though I had too...... ;)

Please Log in or Create an account to join the conversation.

  • tachrev
  • tachrev's Avatar
  • Offline
  • User
  • User
    Registered
  • Rubber Side Goes Down
  • Posts: 335
  • Thanks: 11

Re: that's some head!

30 Mar 2009 06:30 - 30 Mar 2009 06:30
#276690
kzz1p wrote:
Jay what does that head flow? Do you have any numbers? What is the cost?

From this thread:

kzrider.com/index.php?option=com_kunena&...d=2&id=244180#244492

tachrev wrote:
APE Jay wrote:
The Vortex ii with Titanium Intakes and stainless exhaust, all assembled, ready to install, goes for about $3400.

This head can not be used on the street.
It is taller than a Kaw head and the frame must be modified to get it in.

It uses 48mm intake valves and 36 mm exhaust. The valve angel is changed to get them in there. The smallest top end we have been able to do was 1463cc. At that size, the intake pocket was getting uncomfortably close to the top ring groove.

In order to close those valves, it used very expensive valve springs that are good for about one weekend at the track.

The "as cast" intake ports are so big that you have to leave the line at near 10,000 rpm to keep from bogging it. It will run seven second ET without any porting.

I will try to e-mail you a photo of the customers head.

Jay
Figured it was a serious piece, but that answers a lot of questions for me.


Thats the info about the Kaw version at least.
1977 Kawasaki KZ1000 : Street/Strip
Build Thread
Last edit: 30 Mar 2009 06:30 by tachrev.

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: that's some head!

30 Mar 2009 08:17
#276715
the freakin ports are so big on that head that i think if you bolted toilet bowls on it would flow as much air.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • tachrev
  • tachrev's Avatar
  • Offline
  • User
  • User
    Registered
  • Rubber Side Goes Down
  • Posts: 335
  • Thanks: 11

Re: that's some head!

30 Mar 2009 10:29
#276751
timebomb33 wrote:
the freakin ports are so big on that head that i think if you bolted toilet bowls on it would flow as much air.

Like one of these?

Ron's Flying Toilet fuel injection:
www.ronsfuel.com/flying_toilet.cfm
1977 Kawasaki KZ1000 : Street/Strip
Build Thread

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: that's some head!

30 Mar 2009 10:40
#276754
yes i know a few guy's that run the flying toilet set-up on alcohol and they are making some serious power.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • Pro_window78
  • Pro_window78's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 85
  • Thanks: 0

Re: that's some head!

30 Mar 2009 14:13
#276810
So definately not streetable? Whats the biggest anyone would go on a reliablestreet engine?

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum