Backfiring Issues
- KOOL RYDER
-
- Offline
- User
-

Registered
- KZ 650B2 / KZ 1000E
- Posts: 262
- Thanks: 0
Re: Backfiring Issues
30 Jun 2009 12:39
I had the same problem with backfiring out of the carbs and do you know what the solution was? After 6 freaking months, I found that it was the vaccume line from the petcock had come off the nipple and thus creating the backfire through the carbs.
Once I installed the vaccume line that bike ran like a million dollars.
Moral of the story, check the little stuff first before tearing the valve cover off. A lot of times it is something simple that you have overlooked.
Did you check to see if the vaccume line has any cracks, tears, or holes.
For $2.00 all of your troubles may go away.
KRB)
Once I installed the vaccume line that bike ran like a million dollars.
Moral of the story, check the little stuff first before tearing the valve cover off. A lot of times it is something simple that you have overlooked.
Did you check to see if the vaccume line has any cracks, tears, or holes.
For $2.00 all of your troubles may go away.
KRB)
Rockin\' a KZ650B2 since 2007 and a KZ 1000E since 2008
1978 KZ650B
1979 KZ1000ST
1978 KZ650B
1979 KZ1000ST
Please Log in or Create an account to join the conversation.
- KZYoungBlood
-
Topic Author
- Offline
- User
-

Registered
- Posts: 14
- Thanks: 0
Re: Backfiring Issues
01 Jul 2009 18:14 - 01 Jul 2009 18:16
KOOL RYDER wrote:
got the new tires on it today. after a months worth of hard labor. i took it for its first ride. pure bliss :woohoo:
uh... yeah... that vacuum line was missing... forgot to put that back on. doh
that fixed most of the issue. it just pops a little bit. i still have to check the timing/carbs/valves.
THANKS FOR ALL THE HELP GUYS
I had the same problem with backfiring out of the carbs and do you know what the solution was? After 6 freaking months, I found that it was the vaccume line from the petcock had come off the nipple and thus creating the backfire through the carbs.
Once I installed the vaccume line that bike ran like a million dollars.
Moral of the story, check the little stuff first before tearing the valve cover off. A lot of times it is something simple that you have overlooked.
Did you check to see if the vaccume line has any cracks, tears, or holes.
For $2.00 all of your troubles may go away.
KRB)
got the new tires on it today. after a months worth of hard labor. i took it for its first ride. pure bliss :woohoo:
uh... yeah... that vacuum line was missing... forgot to put that back on. doh
that fixed most of the issue. it just pops a little bit. i still have to check the timing/carbs/valves.
THANKS FOR ALL THE HELP GUYS
1981 KZ1000-J1
Last edit: 01 Jul 2009 18:16 by KZYoungBlood.
Please Log in or Create an account to join the conversation.
- 1978KZ650SR
-
- Offline
- User
-

Registered
- If it's not one thing, it's something else.
- Posts: 14
- Thanks: 0
Re: Backfiring Issues
21 Sep 2009 14:07
I wonder if thats whats wrong with mine. It only does it when I first start it until it gets a little warmed up then it stops. I'm gonna go check for cracks right now.
Thanks
Thanks
Andrew
1978 KZ650 SR - Custom paint, Kerker cooler, 4 to 2 exhaust, inverted clubman bars.
1978 KZ650 SR - Custom paint, Kerker cooler, 4 to 2 exhaust, inverted clubman bars.
Please Log in or Create an account to join the conversation.
- pitblue/kz
-
- Offline
- User
-

Registered
- Posts: 74
- Thanks: 0
Re: Backfiring Issues
21 Sep 2009 15:53
i'm having the same problem my timing is right valves are in spec so i just walked out to check the vaccume line and i don't have one on my petcock
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Backfiring Issues
21 Sep 2009 17:12
If idle circuit/pilots are adjusted too lean, causes similar in my CR Specials....
When was the last time this KZ was tuned up....
Plugs, valve clearances, ignition timing, battery charged, carbs synced etc....
When was the last time this KZ was tuned up....
Plugs, valve clearances, ignition timing, battery charged, carbs synced etc....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- tinlizzie37
-
- Offline
- User
-

Registered
- Posts: 149
- Thanks: 1
Re: Backfiring Issues
21 Sep 2009 18:31
Hi KZ, Mine did the same thing as yours. My problem was dirt or rust in the carbs and the wrong pilots and main jets in them. If you have stock exhaust pipes and the stock air filter box, all you need is a good cleaning. It may be a little overwhelming, but it was for me also. It got easier after I got into them. Get a good manual and take your time,you can do it.Make sure you have a fuel filter in line after cleaning the carbs. Z1 Enterprises has all the parts you would need. A metric set of O-ring from Harbor Freight will help also. I had to put larger pilots and mains in mine, since I have a 4into 1 exhaust and pod filters. Good luck. Bob
Bob KZ 650 E1, En 450
Please Log in or Create an account to join the conversation.
- pitblue/kz
-
- Offline
- User
-

Registered
- Posts: 74
- Thanks: 0
Re: Backfiring Issues
21 Sep 2009 20:48
new plugs , points and condenser, carbs synced, timing set, and valves checked about 3 weeks ago and its doing the same as kzyoungbloods bike
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Backfiring Issues
21 Sep 2009 20:52
Always been told if it backfires through carbs, ignition is advanced and if backfires out pipe, ignition timing is retarded. Anyone else heard this?
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- Skyman
-
- Offline
- User
-

Registered
- 1978 KZ1000-B2 LTD 1982 KZ1000-M2 CSR
- Posts: 912
- Thanks: 3
Re: Backfiring Issues
22 Sep 2009 01:41
racer54 wrote:
...and if it backfire out both, the owner is retarded.
:silly:
Always been told if it backfires through carbs, ignition is advanced and if backfires out pipe, ignition timing is retarded. Anyone else heard this?
...and if it backfire out both, the owner is retarded.
West Linn, OR
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Backfiring Issues
22 Sep 2009 05:27
Skyman... :laugh: :laugh: :laugh: :laugh: :laugh: :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
