Silly Sprocket Question...
- zed1015
-
- Offline
- User
-

Registered
- Posts: 3376
- Thanks: 2087
Re: Silly Sprocket Question...
17 Mar 2010 16:16
Blue Z1R has a home made belt drive alternator and the green one runs a Drouin supercharger.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Please Log in or Create an account to join the conversation.
- School Teacher
-
- Offline
- User
-

Registered
- Posts: 381
- Thanks: 0
Re: Silly Sprocket Question...
17 Mar 2010 22:55
hey why the alternator? because you could ? or other reason? also is the bracketing all cnc?
1976 kz900 in parts but will be going some day soon
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
Please Log in or Create an account to join the conversation.
- zed1015
-
- Offline
- User
-

Registered
- Posts: 3376
- Thanks: 2087
Re: Silly Sprocket Question...
18 Mar 2010 02:13 - 18 Mar 2010 02:20
Hi. The alternator was done
.
-
1
-
2
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Last edit: 18 Mar 2010 02:20 by zed1015.
Please Log in or Create an account to join the conversation.
- zed1015
-
- Offline
- User
-

Registered
- Posts: 3376
- Thanks: 2087
Re: Silly Sprocket Question...
18 Mar 2010 03:10
Apologies to jayw704 for his thread going off track with my stuff :blush: .
Back on topic.
To compensate for the smaller radius of the 17" wheel you should aim for a sprocket ratio of about 1.94 to 1.
I have been running this ratio happily for the last 10 years almost everday (its my main transport) and this gives me approx 60mph at 3500rpm, 70mph at 4000 rpm ,140 at 8000 rpm and has allowed me to pull (with tuned engine) 165mph and still going at 11000rpm.
Back on topic.
To compensate for the smaller radius of the 17" wheel you should aim for a sprocket ratio of about 1.94 to 1.
I have been running this ratio happily for the last 10 years almost everday (its my main transport) and this gives me approx 60mph at 3500rpm, 70mph at 4000 rpm ,140 at 8000 rpm and has allowed me to pull (with tuned engine) 165mph and still going at 11000rpm.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Please Log in or Create an account to join the conversation.
- jayw704
-
Topic Author
- Offline
- User
-

Registered
- Posts: 87
- Thanks: 0
Re: Silly Sprocket Question...
18 Mar 2010 05:56
No reason to apologize my answer was great within 5 min of my post I already have new sprockets on the way and will let every body know how it works so this thread was about done now we have something much more interesting to look at and talk about thank you for the close ups I love it!
1978 KZ1000
Go Loud and go fast or dont go at all!!!
Go Loud and go fast or dont go at all!!!
Please Log in or Create an account to join the conversation.
- davel
-
- Offline
- User
-

Registered
- Posts: 209
- Thanks: 0
Re: Silly Sprocket Question...
18 Mar 2010 19:54 - 18 Mar 2010 19:55
Hey Zed,
Beautiful bikes! What are the specs on the supercharged bike? Carb, exhaust, CC, CR, cam, boost, front/rear shocks, etc. Any hp and torque figues?
Thanks!
Beautiful bikes! What are the specs on the supercharged bike? Carb, exhaust, CC, CR, cam, boost, front/rear shocks, etc. Any hp and torque figues?
Thanks!
Last edit: 18 Mar 2010 19:55 by davel.
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Silly Sprocket Question...
18 Mar 2010 20:02
with my 1075 setup i use a 630 chain and 15 front and 33 rear i stayed with the 630 because of the ease of installing the master link a 530 rear sprocket would just be too tiny with this gearing i'm roughly about 3750 rpm at 6o miles an hour it is very smooth and not buzy at all very good to tour with. if i want to play i swap over to a 14 39 combo. don't know what it revs at 60 miles an hour but it sure is fun.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- zed1015
-
- Offline
- User
-

Registered
- Posts: 3376
- Thanks: 2087
Re: Silly Sprocket Question...
19 Mar 2010 04:06
davel wrote:
Hi.
Carb is Keihin 42mm pumper as opposed to the original 55mm injector(which i never had).
Exhaust is hybrid new one off headers to my spec to the collector then various recycled scrap for the link pipe and what masqurades as a silencer.
Capacity is wiseco 1075 with CR just under 8-1.
Cams are stock on slotted sprockets currently on 110 deg lobe centers but maybe going to 112 on the ex at some point in the future.
blower gearing is currently set for around 8psi boost for the road.
Front end is Zx9r and rear is xjr1300sp swinger with gsx1400 shocks.
Not got any power figures etc yet as the weather here was turning just as i finished the build in oct 09, Did manage to do a couple of short runs before the winter set in and it goes very well to say the least :woohoo: , just need to do some fine tuning and gradually put some longer planned trips under its belt before i can trust its reliability as a daily ride. .
Lots more pic's and details at the - z1ownersclub.co.uk - website in projects under the heading DROUIN SUPERCHARGED Z1000.
Hey Zed,
Beautiful bikes! What are the specs on the supercharged bike? Carb, exhaust, CC, CR, cam, boost, front/rear shocks, etc. Any hp and torque figues?
Thanks!
Hi.
Carb is Keihin 42mm pumper as opposed to the original 55mm injector(which i never had).
Exhaust is hybrid new one off headers to my spec to the collector then various recycled scrap for the link pipe and what masqurades as a silencer.
Capacity is wiseco 1075 with CR just under 8-1.
Cams are stock on slotted sprockets currently on 110 deg lobe centers but maybe going to 112 on the ex at some point in the future.
blower gearing is currently set for around 8psi boost for the road.
Front end is Zx9r and rear is xjr1300sp swinger with gsx1400 shocks.
Not got any power figures etc yet as the weather here was turning just as i finished the build in oct 09, Did manage to do a couple of short runs before the winter set in and it goes very well to say the least :woohoo: , just need to do some fine tuning and gradually put some longer planned trips under its belt before i can trust its reliability as a daily ride. .
Lots more pic's and details at the - z1ownersclub.co.uk - website in projects under the heading DROUIN SUPERCHARGED Z1000.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: Silly Sprocket Question...
19 Mar 2010 04:13
zed1015 wrote:
Very Nice!
You do great work
Very Nice!
You do great work
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Silly Sprocket Question...
19 Mar 2010 09:38
Green n yellow.... Drooooooooooooooooool!
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
