Re-installing cams?

  • Link14
  • Link14's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 575
  • Thanks: 6

Re: Re-installing cams?

28 Mar 2010 17:33
#356799
Hi Polkat,

Sorry I didn't respond sooner, I was moving my daughter back to CU. Here's a scan from the manual. Hope it helps.

Please Log in or Create an account to join the conversation.

  • polkat
  • polkat's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 513
  • Thanks: 1

Re: Re-installing cams?

28 Mar 2010 18:38 - 28 Mar 2010 18:41
#356807
Thanks Link14, yea, that helps a lot! That's pretty much what I have, but I feel a lot better seeing it!

Motor Head, the cam lobe tips are pointing away from each other (horizontally) at No. 1, and toward each other (also horizontally) at No. 4. No's 2 and 3 are pointed away from each other vertically. The timing marks are set at "T" 1-4.

I'm going to button this up tomorrow, so does that still sound right to you folks?

Thanks all for the help!
Last edit: 28 Mar 2010 18:41 by polkat.

Please Log in or Create an account to join the conversation.

  • Injected
  • Injected's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1844
  • Thanks: 1286

Re: Re-installing cams?

28 Mar 2010 20:31
#356832
In the second picture (close up of the sprockets) the exhaust looks OK, but the intake is one tooth off... unbolt the intake and rotate till the hash mark lines up with the top of the head, then you should be OK... it will run the way you have it but it won't run right.
1978 KZ650B2 w 1197cc Z1 engine
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project


Please Log in or Create an account to join the conversation.

  • polkat
  • polkat's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 513
  • Thanks: 1

Re: Re-installing cams?

28 Mar 2010 21:35
#356844
Whoops, I should have explained. The exhaust cam is torqued down, but the intake cam is still loose, and sitting up high because the lobes are just resting on the buckets. Once torqued down, it should be even with the head.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum