KZ1K'S ENGINE PROJECT
- 9am53
-
- Offline
- User
-

Registered
- homebrew, and some bbq
- Posts: 1787
- Thanks: 3
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:12
Patton wrote:
So if you put the parts into the dishwasher did the heat not create instant surface rust? I remember last winter when I cleaned my cylinders I did the old toilet brush cleaning and they instantly got surface rust on them...
If you put the gears and shit into the dishwasher do they leave any funky smell or residue in there? I would love to do that, just don't wanna get caught! lol
Have washed many motor parts in the dishwasher, which did a pretty good job. :laugh:
Good Fortune!
So if you put the parts into the dishwasher did the heat not create instant surface rust? I remember last winter when I cleaned my cylinders I did the old toilet brush cleaning and they instantly got surface rust on them...
If you put the gears and shit into the dishwasher do they leave any funky smell or residue in there? I would love to do that, just don't wanna get caught! lol
'84 GPz900r
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:15
kz1k wrote:
if you want to get really crazy have the gears shot peened on the sides after total disasembly,but thats really overkill for what your doing
you need to comepletely disasemble the gears from the shafts before doing that,id just clean em up in a solvent tank and check the bearings.can i bead blast my tranny gears?
if you want to get really crazy have the gears shot peened on the sides after total disasembly,but thats really overkill for what your doing
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:25
Two words about flushing out oil passages...
Garden Hose!
Car wash hose is good for cleaning grunge but no good for flushing out the oil passages.
I have ritual of sorts that I go through and it takes considerable time to do it properly. It involves Simple Green & Brake Cleaner as well.
Any of you guys working on your own motors, do yourself a favor and spray out the bolt holes with brake cleaner using the plastic nozzle extension... Watch your eyes!
You should see the crud that comes out of cam tower bolt holes especially
Garden Hose!
Car wash hose is good for cleaning grunge but no good for flushing out the oil passages.
I have ritual of sorts that I go through and it takes considerable time to do it properly. It involves Simple Green & Brake Cleaner as well.
Any of you guys working on your own motors, do yourself a favor and spray out the bolt holes with brake cleaner using the plastic nozzle extension... Watch your eyes!
You should see the crud that comes out of cam tower bolt holes especially
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:27Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:40bore brushes,lots of cans of brake clean and several rolls of white toilet paper are the best supplies ive ever found for the final cleaning before assembling a motor.
keep scrubbing down the inside of those cases with toilet paper after spraying with carb cleaner till no more black crud shows up,same with sleeves before installing block over pistons
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:54
PLUMMEN wrote:
And I thought all you Nebraska guys washed everything with this...
bore brushes,lots of cans of brake clean and several rolls of white toilet paper are the best supplies ive ever found for the final cleaning before assembling a motor.
keep scrubbing down the inside of those cases with toilet paper after spraying with carb cleaner till no more black crud shows up,same with sleeves before installing block over pistons
And I thought all you Nebraska guys washed everything with this...
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:56
thats the special lube we use when we feed the cows! :blink: :woohoo:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 16:58
PLUMMEN wrote:
:laugh:
Joe when your motor is all done, the cases, block & head should look like this..
thats the special lube we use when we feed the cows! :blink: :woohoo:
:laugh:
Joe when your motor is all done, the cases, block & head should look like this..
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 17:00
Show Off... :whistle: :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 17:01
now if somebody would just spend some time detailing that thing! :laugh:
now this is what a motor should look like before glassbeading and finish sanding
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- 9am53
-
- Offline
- User
-

Registered
- homebrew, and some bbq
- Posts: 1787
- Thanks: 3
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 17:05
larrycavan wrote:
I think I just shot some corn huskers lotion on my screen :blush:
I think I just shot some corn huskers lotion on my screen :blush:
'84 GPz900r
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
'71 CB350
s289.photobucket.com/albums/ll231/9am53/
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: KZ1K'S ENGINE PROJECT
09 Oct 2010 17:13 - 09 Oct 2010 17:13
Don't be fooled all... Larry learned my Dupli-Color trick.... :blink: That's just silver wheel paint... :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 09 Oct 2010 17:13 by Old Man Rock.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
