KZ1K'S ENGINE PROJECT
- kz1k
-
Topic Author
- Offline
- User
-

Registered
- You Cant Fix Stupid!
- Posts: 1440
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
07 Nov 2010 04:13 - 07 Nov 2010 04:33
keith1 wrote:
my brothers chow died last night. he has been in the fam for a long time. R.I.P. Gus.
i can see keith now....with a pad and pen...."over here are the talkers, and over here are the doers". ill be outside playing with my miller welder i baught from harbor freight.
i did not relize harbor freight sold miller. and i thought we went through this allready with you caller me a talker and not a doer before i sent my head out.kz1k wrote:keith1 wrote:i chose not to get the fins welded because i could weld em myself, or pay $70. you do the math.....and as far as painting my head...forget about it. you got your head up your ass today?...again...:laugh:kzrider.com/index.php?option=com_kunena&...w&catid=11&id=255586
read the above thread.....i have no allegiance to anyone on here, but pitstop does good work and things look good cosmetically if you spend the money.....these old bikes take a lot of money to bring back......obviously, your head showed up with broken fins and needing a good clean-up both
mechanic wise and cosmetic wise.......you chose not to do the cosmetic work......you got what you paid for....
this is from pit stop..."It is called "skat blast" and is sold by the company that made my bead
blaster.
It is a little course and leaves a finish that works great for painting." too bad i am not painting my motor...:silly:
if you go back a few posts there smokey, you stated you werent sure if the fins were broken when you sent it out....get YOUR head out of your ass......gonna mig weld em with your harbor freight special?....good luck to ya....if ya do decide to tig em, send out some pics when you are done...we would love to see em....just might be what seperates the talkers from the doers.....
my brothers chow died last night. he has been in the fam for a long time. R.I.P. Gus.
i can see keith now....with a pad and pen...."over here are the talkers, and over here are the doers". ill be outside playing with my miller welder i baught from harbor freight.
1978 KZ1000A2
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
Last edit: 07 Nov 2010 04:33 by kz1k.
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: KZ1K'S ENGINE PROJECT
07 Nov 2010 17:37
kz1k wrote:
blah blah blah.......post up the progress....
keith1 wrote:i did not relize harbor freight sold miller. and i thought we went through this allready with you caller me a talker and not a doer before i sent my head out.kz1k wrote:keith1 wrote:i chose not to get the fins welded because i could weld em myself, or pay $70. you do the math.....and as far as painting my head...forget about it. you got your head up your ass today?...again...:laugh:kzrider.com/index.php?option=com_kunena&...w&catid=11&id=255586
read the above thread.....i have no allegiance to anyone on here, but pitstop does good work and things look good cosmetically if you spend the money.....these old bikes take a lot of money to bring back......obviously, your head showed up with broken fins and needing a good clean-up both
mechanic wise and cosmetic wise.......you chose not to do the cosmetic work......you got what you paid for....
this is from pit stop..."It is called "skat blast" and is sold by the company that made my bead
blaster.
It is a little course and leaves a finish that works great for painting." too bad i am not painting my motor...:silly:
if you go back a few posts there smokey, you stated you werent sure if the fins were broken when you sent it out....get YOUR head out of your ass......gonna mig weld em with your harbor freight special?....good luck to ya....if ya do decide to tig em, send out some pics when you are done...we would love to see em....just might be what seperates the talkers from the doers.....
my brothers chow died last night. he has been in the fam for a long time. R.I.P. Gus.
i can see keith now....with a pad and pen...."over here are the talkers, and over here are the doers". ill be outside playing with my miller welder i baught from harbor freight.
blah blah blah.......post up the progress....
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: KZ1K'S ENGINE PROJECT
14 Nov 2010 18:00
keith1 wrote:
i ll say the glass is half full and he is gonna impress the crap out of all of us......:laugh: ...any takers?
kz1k wrote:keith1 wrote:i did not relize harbor freight sold miller. and i thought we went through this allready with you caller me a talker and not a doer before i sent my head out.kz1k wrote:keith1 wrote:i chose not to get the fins welded because i could weld em myself, or pay $70. you do the math.....and as far as painting my head...forget about it. you got your head up your ass today?...again...:laugh:kzrider.com/index.php?option=com_kunena&...w&catid=11&id=255586
read the above thread.....i have no allegiance to anyone on here, but pitstop does good work and things look good cosmetically if you spend the money.....these old bikes take a lot of money to bring back......obviously, your head showed up with broken fins and needing a good clean-up both
mechanic wise and cosmetic wise.......you chose not to do the cosmetic work......you got what you paid for....
this is from pit stop..."It is called "skat blast" and is sold by the company that made my bead
blaster.
It is a little course and leaves a finish that works great for painting." too bad i am not painting my motor...:silly:
if you go back a few posts there smokey, you stated you werent sure if the fins were broken when you sent it out....get YOUR head out of your ass......gonna mig weld em with your harbor freight special?....good luck to ya....if ya do decide to tig em, send out some pics when you are done...we would love to see em....just might be what seperates the talkers from the doers.....
my brothers chow died last night. he has been in the fam for a long time. R.I.P. Gus.
i can see keith now....with a pad and pen...."over here are the talkers, and over here are the doers". ill be outside playing with my miller welder i baught from harbor freight.
blah blah blah.......post up the progress....
i ll say the glass is half full and he is gonna impress the crap out of all of us......:laugh: ...any takers?
Please Log in or Create an account to join the conversation.
- kz1k
-
Topic Author
- Offline
- User
-

Registered
- You Cant Fix Stupid!
- Posts: 1440
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
15 Nov 2010 09:53
i dont have to impress anyone but me, man you are so full of yourself.
1978 KZ1000A2
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: KZ1K'S ENGINE PROJECT
15 Nov 2010 14:39
kz1k wrote:
i m on the edge of my seat....:laugh:
i dont have to impress anyone but me, man you are so full of yourself.
i m on the edge of my seat....:laugh:
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
16 Nov 2010 09:01
But seriously, how are those cases coming along?
Please Log in or Create an account to join the conversation.
- kz1k
-
Topic Author
- Offline
- User
-

Registered
- You Cant Fix Stupid!
- Posts: 1440
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
18 Nov 2010 18:14 - 18 Nov 2010 18:15
DoubleDub wrote:
what cases? just kidding. bikes on back burner...i need to make 20 of these for a equestrian community. until i am done, i am stuck doing this. helps pay the bills, and parts $$$.But seriously, how are those cases coming along?
1978 KZ1000A2
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
"JUST IN! A MAN WHO HOLDS THE WORLD RECORD FOR USING THE MOST DRUGS DIES TODAY. HE WAS WAS ATTACKED BY A PACK OF WILD DOGS HE THOUGHT HE SAW"
WHY FART AND WASTE IT, WHEN YOU CAN BURP AND TASTE IT?
Last edit: 18 Nov 2010 18:15 by kz1k.
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
19 Nov 2010 05:10
26 pages and no running engine yet
What gives?
Everybody I've ever known that was fond of bong bubbles never gets anything accomplished :laugh:
Get off your arse kid and let's see some progress already
Everybody I've ever known that was fond of bong bubbles never gets anything accomplished :laugh:
Get off your arse kid and let's see some progress already
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: KZ1K'S ENGINE PROJECT
19 Nov 2010 06:00
Man that's alot of glue!
Now I see why you need a big oven.
Powdercoat them for sure! Probally $150 around Western NY
Now I see why you need a big oven.
Powdercoat them for sure! Probally $150 around Western NY
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: KZ1K'S ENGINE PROJECT
19 Nov 2010 16:02
well if you can come up with a design that is not robbing an artist ,which you may have there already....i could get you 1200 in your pocket apiece.... the rest i could cover shipping ,tax,and a sellers fee....all day long in camrel Ca ...it is all horses and super rich muthers out here...and i built crates for pieces for a yr and delivered to all the galleries,a blown glass goldfish goes 800 and sits in your palm....motel quality art goes 70,000...you could sell 20 a yr at 1200 in pocket...and that is a low $ number per piece......
they would need to be tight and finished nice....hit me up....
kz1k wrote:
they would need to be tight and finished nice....hit me up....
kz1k wrote:
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: KZ1K'S ENGINE PROJECT
19 Nov 2010 16:08
My horse farm manager daughter would LOVE to have one of those for her deck.Great holiday present.Want to fab me up one and send it to Tennessee? I gots the money.bj
Please Log in or Create an account to join the conversation.
- z1kzonly
-
- Offline
- User
-

Registered
- Sustaining Member
- Posts: 2815
- Thanks: 527
Re: KZ1K'S ENGINE PROJECT
20 Nov 2010 00:34
z1kzonly wrote:
WTF? Thats $150 to powdercoat if it it is already clean and sandblasted, 1 color. Guy here does bike frames for $100.
I take all my big stuff to a grave stone monument place.
An old timer loves to do the extra work!
He charges 1970 prices for sand blasting.Powdercoat is the way to go.
Check out "Griffis Park" A welder made a park out of stick welded stuff over the last 40 years. East Otto, NY
WTF? What happened to motorcycles?
Man that's alot of glue!
Now I see why you need a big oven.
Powdercoat them for sure! Probally $150 around Western NY
WTF? Thats $150 to powdercoat if it it is already clean and sandblasted, 1 color. Guy here does bike frames for $100.
I take all my big stuff to a grave stone monument place.
An old timer loves to do the extra work!
He charges 1970 prices for sand blasting.Powdercoat is the way to go.
Check out "Griffis Park" A welder made a park out of stick welded stuff over the last 40 years. East Otto, NY
WTF? What happened to motorcycles?
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
