PISTON SWAP
- JEFFG1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: PISTON SWAP
17 Nov 2010 17:38
that is what most of the people on here say. but when you come across one that is from a 1000 kz with je 10.25 to 1 pistons and can get for less than $200.00 hone and go i have to jump
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: PISTON SWAP
17 Nov 2010 17:53
JEFFG1 wrote:
I hear that
It's the "what fits what" question I'm responding to. So think it over because to do it correctly, you'll need to split the cases, pull the studs and have the top case bored.
In a nutshell..... there's no free lunch
that is what most of the people on here say. but when you come across one that is from a 1000 kz with je 10.25 to 1 pistons and can get for less than $200.00 hone and go i have to jump
I hear that
It's the "what fits what" question I'm responding to. So think it over because to do it correctly, you'll need to split the cases, pull the studs and have the top case bored.
In a nutshell..... there's no free lunch
Please Log in or Create an account to join the conversation.
- JEFFG1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: PISTON SWAP
17 Nov 2010 18:05
i understand i might buy it and if nothing else i can sell it later. the bike is getting redone now and the motor is out already so mybe i will use it?
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
- toad
-
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: PISTON SWAP
26 Dec 2010 05:05
I personally know a few guys that exchanged a 903 for a 1015 block without touching the cases, I just did mine bolted right on, so your saying someone had allready hogged the cases before me, please confirm because this would be good to no.thanks
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Please Log in or Create an account to join the conversation.
- andy9802gt
-
- Offline
- User
-

Registered
- If it tastes that good, eat it yourself.
- Posts: 695
- Thanks: 19
Re: PISTON SWAP
26 Dec 2010 05:51
toad wrote:
The thing with these bikes is that they are 30+ years old. Most of them are not in original condition. With the parts interchangeability (damn that's a big word) it's not unusual to have parts from 3 or 4 different bikes making up one. To the guys putting 1015cc blocks on unbored 900 cases check your engine # you might be suprised to find 1000 cases.
I personally know a few guys that exchanged a 903 for a 1015 block without touching the cases, I just did mine bolted right on, so your saying someone had allready hogged the cases before me, please confirm because this would be good to no.thanks
The thing with these bikes is that they are 30+ years old. Most of them are not in original condition. With the parts interchangeability (damn that's a big word) it's not unusual to have parts from 3 or 4 different bikes making up one. To the guys putting 1015cc blocks on unbored 900 cases check your engine # you might be suprised to find 1000 cases.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- lemo32
-
- Offline
- User
-

Registered
- The Price of Cool aint cheap
- Posts: 316
- Thanks: 2
Re: PISTON SWAP
26 Dec 2010 08:37
I didnt have a problem with mine, it bolted right up, know for a fact engine numbers were a 900 but what i dont know is if somebody had already done a mod, but if mod was done why would they have a 903 on there?:huh:
1979 kz 1000 06 katana 750
Please Log in or Create an account to join the conversation.
- toad
-
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: PISTON SWAP
26 Dec 2010 08:43
my numbers = z1
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
Please Log in or Create an account to join the conversation.
- gearheadmm
-
- Offline
- User
-

Registered
- MUCH MORE BOOST..........I mean BRAVO
- Posts: 290
- Thanks: 11
Re: PISTON SWAP
26 Dec 2010 18:52 - 26 Dec 2010 18:54
I've personally installed a 1015 block onto a set of KZ900 cases, no prob. With a MKII crank!
General Joeseph Dunford FOR PRESIDENT!!!
69.46.28.106/forum/11-projects/413221-80-kz-1000-st-recycled
69.46.28.106/forum/11-projects/413221-80-kz-1000-st-recycled
Last edit: 26 Dec 2010 18:54 by gearheadmm.
Please Log in or Create an account to join the conversation.
- DFIGPZ
-
- Offline
- User
-

Registered
- Posts: 615
- Thanks: 121
Re: PISTON SWAP
27 Dec 2010 15:58
Its hit or miss on kz1000 block fitting onto 900 cases i have had some that went right on and some that needed minor opening up on the upper case.
1984 750 Turbo
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
