Clutch issue/Checking Timing
- BIGKEVIN
-
Topic Author
- Offline
- User
-

Registered
- Posts: 419
- Thanks: 1
Re: Clutch issue/Checking Timing
11 Dec 2010 11:36
I checked my Haynes manual and it shows 8 inserted disks and 7 plain. I counted mine and it has 10 inserted disks and 9 plain disks. Anyone has any reason for this. Is this what the APE clutch disk from Z1 has. If this is what is from Z1, what is the thickness supposed to be ?
1976 KZ900
2006 ZX6R
2006 ZX6R
Please Log in or Create an account to join the conversation.
- P21
-
- Offline
- User
-

Registered
- Posts: 471
- Thanks: 34
Re: Clutch issue/Checking Timing
11 Dec 2010 12:34
look at Z1 interprise under your bike model and it has steel plates and friction plates just add the number of them you need,its like page 2 or 3
sounds like you got too many plates going on in there.
just stick with STOCK set-up
and DONT forget NEW springs
sounds like you got too many plates going on in there.
just stick with STOCK set-up
and DONT forget NEW springs
Kawasaki KZ 1000 Police (2002) P21
Please Log in or Create an account to join the conversation.
- P21
-
- Offline
- User
-

Registered
- Posts: 471
- Thanks: 34
Re: Clutch issue/Checking Timing
11 Dec 2010 12:53
ok page 3
7-steel plates @7.23 = 50.61
8-friction plates @4.82 = 38.56
5-springs @ total 13.82
so your total for plates only is =89.17 thats cheap considering the prices for newer bikes
so with plates and springs total 102.99 not bad
then you got all new stuff and good to go
just make sure you readjust your push rod set-up after this.
7-steel plates @7.23 = 50.61
8-friction plates @4.82 = 38.56
5-springs @ total 13.82
so your total for plates only is =89.17 thats cheap considering the prices for newer bikes
so with plates and springs total 102.99 not bad
then you got all new stuff and good to go
just make sure you readjust your push rod set-up after this.
Kawasaki KZ 1000 Police (2002) P21
Please Log in or Create an account to join the conversation.
- BIGKEVIN
-
Topic Author
- Offline
- User
-

Registered
- Posts: 419
- Thanks: 1
Re: Clutch issue/Checking Timing
11 Dec 2010 20:43
I'm just wondering why there were so many disks installed. I'll order the parts tomorrow.
1976 KZ900
2006 ZX6R
2006 ZX6R
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Clutch issue/Checking Timing
11 Dec 2010 21:38
Maybe the previous owner(s) thought more cltch plates were the "Hot" set up.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- keith1
-
- Offline
- User
-

Registered
- Posts: 1646
- Thanks: 3
Re: Clutch issue/Checking Timing
11 Dec 2010 21:59
BIGKEVIN wrote:
its done for a couple of reasons...none of which really work.....APE sells an extra plate kit.....just go with your stock set-up when re-ordering....Timebomb(tim) has many 1320 passes on built motors with a stock clutch set-up....the key is adjusting it right.....
I'm just wondering why there were so many disks installed. I'll order the parts tomorrow.
its done for a couple of reasons...none of which really work.....APE sells an extra plate kit.....just go with your stock set-up when re-ordering....Timebomb(tim) has many 1320 passes on built motors with a stock clutch set-up....the key is adjusting it right.....
Please Log in or Create an account to join the conversation.
- BIGKEVIN
-
Topic Author
- Offline
- User
-

Registered
- Posts: 419
- Thanks: 1
Re: Clutch issue/Checking Timing
12 Dec 2010 09:30
I'll be ordering the stock number of clutch disks shortly. Hopefully this will fix my clutch issye and I can move on to the next part.
1976 KZ900
2006 ZX6R
2006 ZX6R
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Clutch issue/Checking Timing
12 Dec 2010 12:42
Another option would be finding correct number of serviceable plates from those existing, and reassemble, along with existing springs. Then perform push rod adjustment, and re-test.
It's possible that a previous owner attempted to correct slippage by adding plates, when a simple push rod adjustment would have eliminated the slippage.
Good Fortune!
It's possible that a previous owner attempted to correct slippage by adding plates, when a simple push rod adjustment would have eliminated the slippage.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- BIGKEVIN
-
Topic Author
- Offline
- User
-

Registered
- Posts: 419
- Thanks: 1
Re: Clutch issue/Checking Timing
12 Dec 2010 13:50
I may just do that. I might take the 8 thickest plates and put them in with 7 steel plates and adjust the pushrod to see what happens. I don't know how long these clutches have been in so I'm going to replace them when i get the clutches from Z1.
1976 KZ900
2006 ZX6R
2006 ZX6R
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Clutch issue/Checking Timing
12 Dec 2010 17:34 - 12 Dec 2010 17:35
Here are some specs for determining serviceable clutch springs and plates, per FSM:
Clutch spring free length
Standard 1.33" (33.8 mm)
Service Limit 1.27" (32.3 mm)
Friction Plate Thickness (Surface to Surface)
Standard .146" (3.7 mm) ~ .154" (3.9 mm)
Service Limit .134" (3.4 mm)
Friction Plate Warp
Standard < .006" (.15 mm)
Service Limit < .012" (.30 mm)
Steel Plate Warp
Standard < .008" (.20 mm)
Service Limit < .016" (.40 mm)
Good Fortune!
Clutch spring free length
Standard 1.33" (33.8 mm)
Service Limit 1.27" (32.3 mm)
Friction Plate Thickness (Surface to Surface)
Standard .146" (3.7 mm) ~ .154" (3.9 mm)
Service Limit .134" (3.4 mm)
Friction Plate Warp
Standard < .006" (.15 mm)
Service Limit < .012" (.30 mm)
Steel Plate Warp
Standard < .008" (.20 mm)
Service Limit < .016" (.40 mm)
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 12 Dec 2010 17:35 by Patton.
Please Log in or Create an account to join the conversation.
- P21
-
- Offline
- User
-

Registered
- Posts: 471
- Thanks: 34
Re: Clutch issue/Checking Timing
12 Dec 2010 20:08
very well done there sir.
Kawasaki KZ 1000 Police (2002) P21
Please Log in or Create an account to join the conversation.
- BIGKEVIN
-
Topic Author
- Offline
- User
-

Registered
- Posts: 419
- Thanks: 1
Re: Clutch issue/Checking Timing
13 Dec 2010 15:42
I just measured all 10 of the clutch disks and none of them meet the minumum of 1.27". I don't know what the previous owner did, but I am wondering if he ordered clutch disk and they were machined thinner so more disks were installed. I have order the disks from Z1 and they should be here in a couple of days.
1976 KZ900
2006 ZX6R
2006 ZX6R
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
