Engine Knock

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Engine Knock

09 Dec 2010 15:39
#416146
Good chance it's a gummed up cam chain tensioner. Those Hyvo chains will sound like a rod knocking when the tensioner screws up.

Pull it, take it apart, clean it, sand the plungers with some 1000G paper to debur them.

The springs also sack out over time. APE has an aftermarket manual adjust unit that cures the problem once and for all.

Larry C

Please Log in or Create an account to join the conversation.

  • Kawickrice
  • Kawickrice's Avatar
  • Offline
  • User
  • User
    Registered
  • After Monday & Tuesday, even the calendar says WTF
  • Posts: 2469
  • Thanks: 20

Re: Engine Knock

09 Dec 2010 19:26
#416166
I had a loose alternator rotor that made such a racket I could have sworn it was a rod knocking. The sound would come and go as you described, I was not able to figure it out until it loosened up a little more and trashed my stator.
As was said above get a mechanics stethoscope and you should be able to determine the source of the noise. Good Luck
73 Kawasaki Z1
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL

Please Log in or Create an account to join the conversation.

  • grumpy56
  • grumpy56's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 310
  • Thanks: 6

Re: Engine Knock

09 Dec 2010 20:09
#416168
Will add the cam chain tensioner to the list of possible culprits!
Lewis
1982 KZ1000-J2
2006 HD FXD35
1970 Suzuki T350
1972 Suzuki GT380 (In-Process)
In The Past...71 TM400, 72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Engine Knock

29 Dec 2010 06:36
#419097
I'll go with the piston slap as you're noise.
Have you done a carb sync while engine is at temp and running? If the offending piston is getting a stronger signal than the others it may amplify the noise.
New springs for the cam chain tensioner are available from Kawasaki, around $18 for the 2. There is also a O-ring here where the tensioner bolts up. Remember to turn the motor to TDC 1/4 mark before removing tensioner.You can do this at the same time you look for your oil leak at the cooler hoses etc.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • grumpy56
  • grumpy56's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 310
  • Thanks: 6

Re: Engine Knock

29 Dec 2010 06:51
#419099
Thanks Motor Head. Will add to my list!
Lewis
1982 KZ1000-J2
2006 HD FXD35
1970 Suzuki T350
1972 Suzuki GT380 (In-Process)
In The Past...71 TM400, 72 H-D SS350, 72 GT380, 75 Z1B, 77 XLH, 79 CB750K

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: Engine Knock

29 Dec 2010 08:48
#419115
Motor Head wrote:
I'll go with the piston slap as you're noise.
Have you done a carb sync while engine is at temp and running? If the offending piston is getting a stronger signal than the others it may amplify the noise.
New springs for the cam chain tensioner are available from Kawasaki, around $18 for the 2. There is also a O-ring here where the tensioner bolts up. Remember to turn the motor to TDC 1/4 mark before removing tensioner.You can do this at the same time you look for your oil leak at the cooler hoses etc.

maybe this above fuel/carb idea makes the most sense to an idiot like me.....i would think a rod or bearing or piston slap would act up at stop signs and creeping along in traffic...or leaving a dead stop when warm...i would think a cam chain/tensioner would act up when you close the throttle and start gearing down /clutch in-coming to stop lights (or while idling in neutral after warm,,,does it pop or stumble when warming up a bit from overnight off...what do the plugs look like....almost sounds like a fuel starve on a cylinder for a flash then clears and carbs correct...

total idiot here but...the sound you describe reminds me of forgetting to turn my gas on while running errands after a stop....as it just starts to stumble it knocks...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum