New Project
- TowerRigger
-
Topic Author
- Offline
- User
-

Registered
- Posts: 20
- Thanks: 0
Re: New Project
16 Apr 2011 19:49 - 16 Apr 2011 20:00
Yup Steell I see exactly what you're talking about. This is what the top of my block should look like to fit my current timing chain tensioner setup.
So what now? Is replacing the crank the only option? In the end might be the cheapest and easiest option...
So what now? Is replacing the crank the only option? In the end might be the cheapest and easiest option...
Part owner of a 79 KZ650 project with my Old Man.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
Last edit: 16 Apr 2011 20:00 by TowerRigger.
Please Log in or Create an account to join the conversation.
- TowerRigger
-
Topic Author
- Offline
- User
-

Registered
- Posts: 20
- Thanks: 0
Re: New Project
17 Apr 2011 15:45
Part owner of a 79 KZ650 project with my Old Man.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: New Project
17 Apr 2011 16:05
toss the newer cylinder in the oven on a cookie sheet same way it sits on motor at around 350 degrees for a half hour or so,when you hear a thump pull it out and yank the sleeves out of block with some hot pads when the wife isnt looking.
then repeat proceedure on the 650 block,then take the 650 block and 750 sleeves to your local bike machine shop and have the 650 block bored to accept the 750 sleeves.
you might want to take an origional 650 sleeve so they know how tight the sleeve to cylinder clearance needs to be
then repeat proceedure on the 650 block,then take the 650 block and 750 sleeves to your local bike machine shop and have the 650 block bored to accept the 750 sleeves.
you might want to take an origional 650 sleeve so they know how tight the sleeve to cylinder clearance needs to be
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- TowerRigger
-
Topic Author
- Offline
- User
-

Registered
- Posts: 20
- Thanks: 0
Re: New Project
17 Apr 2011 16:26 - 17 Apr 2011 16:34
Back on track! Thanks wireman. I was about to ditch the 810 idea for the time being.
Here's how this'll work. I'll just go in and do up the oven thing while Mom isn't looking.:whistle: Then after she finds out what I've done
Dad will smooth it all over cause he's damn good at that with her. There's a reason they've been married 30 plus years.:laugh:
So then those older timing chain setups aren't too bad to dink with?
And a newer model GPZ750 non turbo head will work with the old chain if you swap the sprockets on the cams out? If my thinkings right the bigger ports/valves with those heads would compliment the larger cc eh?
Here's how this'll work. I'll just go in and do up the oven thing while Mom isn't looking.:whistle: Then after she finds out what I've done
So then those older timing chain setups aren't too bad to dink with?
And a newer model GPZ750 non turbo head will work with the old chain if you swap the sprockets on the cams out? If my thinkings right the bigger ports/valves with those heads would compliment the larger cc eh?
Part owner of a 79 KZ650 project with my Old Man.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
Last edit: 17 Apr 2011 16:34 by TowerRigger.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: New Project
17 Apr 2011 16:36
nope,youll be able to use all the stock kz650 style parts which are easy to come by.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- kawsakiman
-
- Offline
- User
-

Registered
- Posts: 1246
- Thanks: 6
Re: New Project
17 Apr 2011 16:36
i can't remember the break in years but some 650's will need the upped case bored for 750 sleeves.
i know for a fact that 77 650 motors do and that 80 650's do not.
i know for a fact that 77 650 motors do and that 80 650's do not.
someday i will be able to afford my kz habit.
Please Log in or Create an account to join the conversation.
- TowerRigger
-
Topic Author
- Offline
- User
-

Registered
- Posts: 20
- Thanks: 0
Re: New Project
22 Apr 2011 21:01
Part owner of a 79 KZ650 project with my Old Man.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
Please Log in or Create an account to join the conversation.
- TowerRigger
-
Topic Author
- Offline
- User
-

Registered
- Posts: 20
- Thanks: 0
Re: New Project
24 Apr 2011 00:36
Part owner of a 79 KZ650 project with my Old Man.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
*MY* bike that Dad rides all the time while I'm on the road working is a 2000 HD Duece.
Have a KLX110 That my daughter lets me ride for kicks.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
