Problems going at highway speed
- wyldchyld69
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 1
Re: Problems going at highway speed
27 May 2011 03:32
AH HA
So I took apart the petcock. Tore apart the carbs, new hoses, new filters. Took apart the gas cap. I did everything I could think of, anything that was suggested. Then I remembered that a month ago when I had the carbs apart the first time I diddnt use the new needles that came with the rebuild kit. I used the ones that came with the bike when I bought it thinking they were the correct needles. See the ones in the rebuild kit were about 1/8 of an inch shorter. But I did keep them.
Well today I had the bike apart and I decided to put the shorter needles that came in the rebuild kit in the carbs. After some tweeking with the idle I took the bike out on the highway. It was like a dream. She would do 90 if I let her, I am sure of it.
I believe the longer needles were keeping the gas from flowing like it should and starving the engine at higher RPM's. She will still never win a race, but all that matters to me is that I can do highway speed without stalling.
I want to thank everyone who took time to give me some great advice. It all lead me somewhere. I am really glad I got things working right. It seemed to take 10 years off the bikes age.
So I took apart the petcock. Tore apart the carbs, new hoses, new filters. Took apart the gas cap. I did everything I could think of, anything that was suggested. Then I remembered that a month ago when I had the carbs apart the first time I diddnt use the new needles that came with the rebuild kit. I used the ones that came with the bike when I bought it thinking they were the correct needles. See the ones in the rebuild kit were about 1/8 of an inch shorter. But I did keep them.
Well today I had the bike apart and I decided to put the shorter needles that came in the rebuild kit in the carbs. After some tweeking with the idle I took the bike out on the highway. It was like a dream. She would do 90 if I let her, I am sure of it.
I believe the longer needles were keeping the gas from flowing like it should and starving the engine at higher RPM's. She will still never win a race, but all that matters to me is that I can do highway speed without stalling.
I want to thank everyone who took time to give me some great advice. It all lead me somewhere. I am really glad I got things working right. It seemed to take 10 years off the bikes age.
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
-

Registered
- Posts: 8421
- Thanks: 2805
Re: Problems going at highway speed
27 May 2011 09:59
Three things strike me about this thread.
1. There are very helpful people around here who helped a member focus on the usual suspects.
2. Wyldchild69 was cheerfully willing to try each solution as it was offered.
3. When working on a 30+ year old bike, we should never assume that anything on it is correct.
In the end, a sharp eye and an open mind solved the problem and left everyone with another tool or two in our diagnostic arsenals.
Forums don't get much better than that.
1. There are very helpful people around here who helped a member focus on the usual suspects.
2. Wyldchild69 was cheerfully willing to try each solution as it was offered.
3. When working on a 30+ year old bike, we should never assume that anything on it is correct.
In the end, a sharp eye and an open mind solved the problem and left everyone with another tool or two in our diagnostic arsenals.
Forums don't get much better than that.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
