Changing Sprokets
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Changing Sprokets
18 May 2011 07:10
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 14 Feb 2013 11:15 by martin_csr.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Changing Sprokets
18 May 2011 08:39martin_csr wrote:The earlier 650s use a 530 chain? I did not know that.steell wrote: Maybe because the CSR uses a 630 chain while the earlier models use a 530 chain?
So, if he goes w a 530 chain & sprockets, then there won't be a clearance issue. Correct?
I didn't know that either, good catch Steell. I took a look at Kawasaki.com and it shows that even though the CSR uses a 630 chain it still uses the same output shaft as the other models. So switching to a 530 chain might be pretty easy assuming the 530 rear sprockets are available for the CSR wheel. I wonder why Ma Kaw went to a 630 chain when the 530 lasts for so many miles (my original went over 36,000 mi before I replaced it)? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Kidkawie
-
- Offline
- User
-

Registered
- I bleed premix
- Posts: 1924
- Thanks: 246
Re: Changing Sprokets
18 May 2011 13:48KZCSI wrote: My experience is that MA Kaw is pretty damn smart about gearing her bikes. I changed to a larger front sprocket on my 900 just to slow down the cruising RPMs and while I did accomplish the drop I wanted I lost a lot of driveability in the lower four gears and I saw no improvement in fuel mileage.
Fuel consumption has more to do with available power and work performed than it does with engine speed.
IMHO
Bill
I installed a 16t on my 900 and couldn't be happier. I don't think it hurt the performance much, if at all. If you're really beating on it you might want to keep the rpm's a tad higher to stay in it's power range. Doing something like a drag race the bike is a ton faster...and she hums doing 80 instead of screams.
1975 Z1 900
1994 KX250 Supermoto
2004 KX125
1994 KX250 Supermoto
2004 KX125
Please Log in or Create an account to join the conversation.
- Jay650
-
Topic Author
- Offline
- User
-

Registered
- Posts: 38
- Thanks: 0
Re: Changing Sprokets
18 May 2011 15:21
woow!!! ton of information. i appreciate all the help, i am new to this site and new to owning a kz. everyone here has been very helpfull. Im not really to concerned with the gas mileage, if i can get it a little better then that would be good, but i dont want to sacrifice any power, the big seems to go very well the way it is. much better then i originally though it would. right now i think im going to just ride it and enjoy it. this winter i will take the bike all apart and go through everything. if anyone has any suggestions for the bike, or knows of anything that works well with it, i am open to suggestions. i think im going to keep it kind of stock looking, not going with the cafe style.
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 14 Feb 2013 11:15 by martin_csr.
Please Log in or Create an account to join the conversation.
- Jay650
-
Topic Author
- Offline
- User
-

Registered
- Posts: 38
- Thanks: 0
Re: Changing Sprokets
18 May 2011 16:28
funny you should say that, i just came back in the house from changing the bars over. picked up a set of bars, like super bike bars. they go up a little higher then that though. they fit great, way better handling.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
