What am I missing?

  • Onetype
  • Onetype's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 42
  • Thanks: 0

Re: What am I missing?

25 Sep 2011 20:03 - 25 Sep 2011 20:07
#479495
Thanks guys, but the issue happens when the bike is OFF. It's not rideable yet, so I haven't been able to take it through the gears, but the pull seems fine. I'm going to adjust at the case again and add another 1/4 turn counter clockwise.
Last edit: 25 Sep 2011 20:07 by Onetype.

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: What am I missing?

25 Sep 2011 21:55
#479526
What's the state of the bike? I had to replace the springs on my clutch as they would slip until the engine warmed up. Otakar had a nice how-to on cleaning up the fiber and metal discs if they aren't warped and within specs.

I would start again from step 1 on the clutch cable adjustment - act as though you are replacing the clutch cable with a brand new one.

Also, did the actuator get removed? There is a small ball bearing between the actuator rod and the pushing "mushroom" that can drop out of the actuator is removed. This would create a large gap between the rod and the mushroom.

Please Log in or Create an account to join the conversation.

  • jonnybravo
  • jonnybravo's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 518
  • Thanks: 18

Re: What am I missing?

25 Sep 2011 22:48 - 25 Sep 2011 22:51
#479547
oooopppps
see below
Last edit: 25 Sep 2011 22:51 by jonnybravo.

Please Log in or Create an account to join the conversation.

  • jonnybravo
  • jonnybravo's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • Posts: 518
  • Thanks: 18

Re: What am I missing?

25 Sep 2011 22:50
#479550
Onetype wrote: 1979 Kz650E

Adjusted the clutch per manual, it has a nice pull to it. Starts the bike no problem, but with the clutch depressed, and in gear I can not move the bike. What am I missing?
when the bike is sitting still it aint gonna change gears, try moving it forward and back a little, it dont change without movement, if its been sitting awhile then u may have other issues

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: What am I missing?

26 Sep 2011 09:05 - 26 Sep 2011 09:08
#479621
Onetype wrote: Thanks guys, but the issue happens when the bike is OFF. It's not rideable yet, so I haven't been able to take it through the gears, but the pull seems fine. I'm going to adjust at the case again and add another 1/4 turn counter clockwise.

issue happens when the bike is OFF --- and will likely keep on happening, regardless of adjustments made, until the engine is started and running and the plates initially freed as earlier described.

The various adjustments accompanied by repeatedly squeezing and releasing the handlebar clutch lever, or attempting to roll the bike in either direction while in gear with the clutch lever squeezed, or other machinations while the engine is cold, usually fails to suffice in breaking loose the sticking clutch plates in a cold engine.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 26 Sep 2011 09:08 by Patton.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum