Spark Plugs

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Spark Plugs

22 Oct 2011 19:09
#484753
I don't use NGK sparkplugs as I've had more than a few fail new right out of the box. I'm using either Denso W24-ESU or Accel #116 gapped to 0.032".

www.gadgetjq.com/spark_plug_cross_reference_motorcycle.htm
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • Kelso
  • Kelso's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: Spark Plugs

23 Oct 2011 06:04
#484844
Thanks Mike,
I will look and see what is available here. (Scotland)
Why gap at 32".
Thats the high side of what is recommended

Please Log in or Create an account to join the conversation.

  • gengomerpyle
  • gengomerpyle's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 616
  • Thanks: 17

Re: Spark Plugs

23 Oct 2011 10:00
#484861
i gap mine at .030
Kelso wrote: Thanks Mike,
I will look and see what is available here. (Scotland)
Why gap at 32".
Thats the high side of what is recommended
1982 GPZ750R1 ELR
1978 Honda CB750F SuperSport
1971 Honda CB750K
1970 Honda CL100 Scrambler

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Spark Plugs

23 Oct 2011 10:35
#484869
Here is some reading at the NGK site, on of course Spark Plugs.
www.ngksparkplugs.com/tech_support/spark...s/index.asp?mode=nml
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • ramtough_63
  • ramtough_63's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2560
  • Thanks: 136

Re: Spark Plugs

23 Oct 2011 11:37
#484877
I am currently running Autolites. replaced the NGK on advice from my buddy who's KZ ate em every couple weeks. He refuses to use NGK when a customer brings one in for tune or after a long sit
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art


1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...

Please Log in or Create an account to join the conversation.

  • Kelso
  • Kelso's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: Spark Plugs

23 Oct 2011 11:55
#484879
Hi Motor Head,
Interesting web site re plugs.
There is more to it than just creating a SPARK!!
Thanks

Please Log in or Create an account to join the conversation.

  • Kelso
  • Kelso's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: Spark Plugs

23 Oct 2011 12:01
#484880
What is the differance.
Why should NGK not perform as good as Autolite.
Reading NGK spec. they make plugs to suit every situation.
Just wondering why!

Please Log in or Create an account to join the conversation.

  • ramtough_63
  • ramtough_63's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2560
  • Thanks: 136

Re: Spark Plugs

23 Oct 2011 18:35
#484935
I am thinking Quality control at the maufacturing facility. with all things being equal it shouldnt matter what brand of plug you run. back in the drag racing days Autolite made a heat range suited for the kzs that wasnt available in NGK I think thats where his fondness of the brand comes from. As far as my bike while fighting my ignition gremlins the plugs were fouling and quite frankly wouldnt clean up since the swap I have not had to swap the Autolites out.
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art


1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Spark Plugs

23 Oct 2011 18:38 - 24 Oct 2011 09:36
#484936
Kelso wrote: What is the differance.
Why should NGK not perform as good as Autolite.
Reading NGK spec. they make plugs to suit every situation.
Just wondering why!

From my experience NGK is a good plug. I have them in every bike now and in the past. I also run NGK plugs in my RX7 motor, as they have 4 ground electrodes. I have never had a Plug failure in any brand. Some would prefer a certain brand over another.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 24 Oct 2011 09:36 by Motor Head.

Please Log in or Create an account to join the conversation.

  • Kelso
  • Kelso's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: Spark Plugs

24 Oct 2011 06:51
#485020
Thanks for your reply.
Its interesting to hear other points of view on plugs.
Its odd but I have just called at my local bike shop for 4 B8ES plugs to replace my existing BR8ES.I never knew the "R" stood for Resistor.(Forum information Can reduce spark performance)
All they have are the "R" type.(I have ordered them in 2 Days to wait)They only stock NGK plugs.Do you think these are manufactured in GB and the quality is better than USA ones.
I will post details on how they perform re BR8 to B8 And the final plug colours. with a .30 gap
I think this must be due to newer bikes having electronics involved in their system and this reduces interferance.Which I don"t require as the bike is a 79 and the plug caps are already surpressed.

Be in touch, Richard.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Spark Plugs

24 Oct 2011 09:35
#485028
I don't know where you can go in your area/ Country for parts. But it would seem that any place that sells Marine or Power Sports should have the B8ES plugs. But if you have to wait 2 days for them, well at least you have plenty of Guinness to drink!!!! :P
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Spark Plugs

24 Oct 2011 14:06 - 25 Oct 2011 07:50
#485064
It's okay to have one -- but only one -- source of resistance between the ignition coil and tip of the spark plug.

Here are the three places where resistance may be fitted:
Resistor type spark plug (an "R" plug);
Resistor type plug wire (instead of solid metal core);
Resistor type plug cap/boot.

For example, Kawasaki fitted the stock Z1 with resistor style plug caps/boots, solid core wires and non-resistor (NGKB8ES) plugs.

More than one source of resistance will weaken the spark.

In my experience:
Solid metal core plug wire seems more durable than resistor type plug wire;
The resistor built inside a plug cap/boot may eventually fail
(the resistor appears to be a small chunk of carbon :unsure: , but I don't why it happens to fail).

Have for many years purchased relatively inexpensive NGKB8ES spark plugs at AutoZone, and run with Dyna green coils, and Dyna solid core plug wires.

And I don't get heartburn when possibly interfering with obnoxiously loud rap emanating from a nearby cager's boom-box. :lol:

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 25 Oct 2011 07:50 by Patton.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum