Steering mis-aligned
- Bunty27
-
Topic Author
- Offline
- User
-

Registered
- Posts: 147
- Thanks: 2
Steering mis-aligned
09 Aug 2012 23:37
When I took my 1982 KZ550 LTD out for the first test ride, the one thing I noticed was that the steering seemed off alignment, veering to the left instead of being parallel to me. I did notice this when I removed the wheel(to install a new tire) and put it back but I wasn't really sure until I rode it around. I scanned through all the manuals and these forums but was unable to understand how to adjust this alignment. I do not see anything wrong with frame itself. And it's not like the bike pulls to the left or anything. It's just off to the side and I'm guessing it's because of a fall it took some time in the past (there is other evidence on the bike about this).
1982 KZ550 LTD
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Steering mis-aligned
10 Aug 2012 06:56
You need to check the oil in your forks to make sure they have equal amounts of oil. How is the tire wear? Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- bluej58
-
- Offline
- User
-

Registered
- The chrome don't get you home
- Posts: 2474
- Thanks: 507
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Steering mis-aligned
10 Aug 2012 08:25bluej58 wrote: Back wheel alinement ?
Ckeck the alignment by sight (looking down the top of the chain) and not by the marks on the swingarm.
Tire pressure. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Steering mis-aligned
10 Aug 2012 09:35
You noticed a Miss-alignment while changing the front tire? Care to elaborate? Are the spacers correctly placed on each side of the hub?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Steering mis-aligned
10 Aug 2012 10:11
Steering Mis-aligned... :blink:
Unless the front fork tubes are bent, be hard to miss align with everything (wheel spacers, rotor, caliper etc...)correctly in place.
Now you may have some brake caliper dragging that is pulling you left or right.
* Raise the front end off the ground and remove the fender.
Standing directly over the tire spin it and see if rim or brake rotor is warped and coming into
with the brake pads.
* Also, verify tire arrow is correctly installed (forward rotation).
OMR
Unless the front fork tubes are bent, be hard to miss align with everything (wheel spacers, rotor, caliper etc...)correctly in place.
Now you may have some brake caliper dragging that is pulling you left or right.
* Raise the front end off the ground and remove the fender.
Standing directly over the tire spin it and see if rim or brake rotor is warped and coming into
with the brake pads.
* Also, verify tire arrow is correctly installed (forward rotation).
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- Bunty27
-
Topic Author
- Offline
- User
-

Registered
- Posts: 147
- Thanks: 2
Re: Steering mis-aligned
10 Aug 2012 10:14
Let me elaborate.
The bike had a really bad looking front tire (cracked, browned, almost no tread). When I had the bike on center-stand and looked at steering from the front while standing between the tires to ensure that it was aligned with the frame, I then went to the opposite side and while sitting on the seat noticed that the steering was not parallel to me. I thought maybe this was due to the bad tire or the wheel not installed correctly. I replaced the tire (put a new one since it needed on badly) and I noticed that nothing changed on the steering. And when I finally took it out on a test ride, I confirmed that the steering was indeed not parallel to me.
It doesn't look like a real wheel alignment issue. Not sure if this is a fork issue either because I think I notice this even when the front tire is off the ground.
The bike had a really bad looking front tire (cracked, browned, almost no tread). When I had the bike on center-stand and looked at steering from the front while standing between the tires to ensure that it was aligned with the frame, I then went to the opposite side and while sitting on the seat noticed that the steering was not parallel to me. I thought maybe this was due to the bad tire or the wheel not installed correctly. I replaced the tire (put a new one since it needed on badly) and I noticed that nothing changed on the steering. And when I finally took it out on a test ride, I confirmed that the steering was indeed not parallel to me.
It doesn't look like a real wheel alignment issue. Not sure if this is a fork issue either because I think I notice this even when the front tire is off the ground.
1982 KZ550 LTD
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Steering mis-aligned
10 Aug 2012 10:46
Take some clean images and post, maybe someone will be able to spot something out place.
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 22 Jan 2013 21:02 by martin_csr.
Please Log in or Create an account to join the conversation.
- damarble
-
- Offline
- User
-

Registered
- Posts: 264
- Thanks: 13
Re: Steering mis-aligned
10 Aug 2012 11:52 - 10 Aug 2012 11:53
My triples were twisted in relation to each other and the result is what you are describing. If that's the case, support the bike, loosen the triple clamp bolts, see if you can bring them back parallel to each other.
Go green, buy a Kawasaki!
82 KZ750M CSR Build Thread
89 ZX600C Streetfighter
82 KZ750M CSR Build Thread
89 ZX600C Streetfighter
Last edit: 10 Aug 2012 11:53 by damarble.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Steering mis-aligned
10 Aug 2012 12:55We have a winner!damarble wrote: My triples were twisted in relation to each other and the result is what you are describing. If that's the case, support the bike, loosen the triple clamp bolts, see if you can bring them back parallel to each other.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Bunty27
-
Topic Author
- Offline
- User
-

Registered
- Posts: 147
- Thanks: 2
Re: Steering mis-aligned
10 Aug 2012 13:03
Sorry damarble but could you please say all of that again in English? :dry: Are you referring to teh upper triple clamp? And what do you mean when you talking about bringing them back in parallel? Sorry but I have my newbie flag up!
1982 KZ550 LTD
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
