KZ1000 engine in KZ650 frame?
- jordan172005
-
Topic Author
- Offline
- User
-

Registered
- Posts: 68
- Thanks: 0
KZ1000 engine in KZ650 frame?
26 Oct 2007 18:21
I have a 1978 KZ650C that I just rebuild the top end on come to find that the timing chain is ticking alot. Instead of tearing the engine down to fix the timing chain I will just put the newly buitlt 650 engine on another 650 frame I have. I am debating on either building a 750 turbo or a stock 1000 on my 650 frame. I figure the 1000 should be easier and probably cheaper. Can anyone tell me what is involved to get the 1000 to fit my 650C. Feel free to post about the 750 turbo too like suggestions on turbos or anything. I'd love to do both but will only be able to do one over the winter.
Please Log in or Create an account to join the conversation.
- FastKaw1
-
- Offline
- User
-

Registered
- Posts: 141
- Thanks: 0
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 06:03
yep
You can do it. But the first time you need to adjust the valves
you have to take the motor out to do it.
Trust me it's more hassle then it's worth.
You can do it. But the first time you need to adjust the valves
you have to take the motor out to do it.
Trust me it's more hassle then it's worth.
Please Log in or Create an account to join the conversation.
- jordan172005
-
Topic Author
- Offline
- User
-

Registered
- Posts: 68
- Thanks: 0
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 07:29
I will have it all built and checked out before I install it. I could have the engine on the bench and put the cams in and check all the valves. it would then be good for a couple thousand miles ( one season the way we ride around here lol) . I'm not worried about the amount of time it would take to maintain it as I have lots of time to screw with stuff like this. Any information on what I need to do to install a KZ900 or KZ1000 engine into my KZ650 frame is greatly appreciated.
Thank you,
Jordan
Thank you,
Jordan
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 07:43
The biggest problem would be the lightness of the frame. This is why Kawasaki strengthened the frame all the time. Even the 77 KZ1000 engine was too powerful for the 76 900 frame
In 78 the tubes were enlarged by 1/4" on the D model for this reason and even that was not enough. The reciprocating mass on the thousand is just way too much for that frame. Also, if you rebuild the entire top end, you should re-shim the cams after the valves seat. The cam clearances get too tight. This takes about 500mi. I ride that in about seven days. Would your bike be a novelty? Yes. Would it be ride able in an aggressive manor? No. I guess that would defeat the whole purpose of putting a 1000 engine in a 650 frame.
Otto Kudrna
In 78 the tubes were enlarged by 1/4" on the D model for this reason and even that was not enough. The reciprocating mass on the thousand is just way too much for that frame. Also, if you rebuild the entire top end, you should re-shim the cams after the valves seat. The cam clearances get too tight. This takes about 500mi. I ride that in about seven days. Would your bike be a novelty? Yes. Would it be ride able in an aggressive manor? No. I guess that would defeat the whole purpose of putting a 1000 engine in a 650 frame.
Otto Kudrna
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- reborn650
-
- Offline
- User
-

Registered
- Posts: 693
- Thanks: 5
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 08:16
I'll chime in on this one as I had pondered stuffing a big litre motor into a middleweight's frame. I still may do this one day.
Your best bet is to pick up a tired 1984 Gpz750 engine, cylinders and head and put it onto your 650's bottom end. You might need to put in a new beefier clutch to handle the extra power. This Gpz engine was rated around 87 hp when new which is a significant step up from the 650's 64 hp. Get your hands on a Wiseco 810 kit, clean up the head and get a set of good carbs and ignition and you should be in the right power range of a stock Kz1000 which was around the mid 90's if I recall.
Shoehorning the engine into the frame and gussetting it to handle the oversized motor is doable but as mentioned earlier, any time you have to check valves or pull the valve cover to get to a little leak this will turn into a major project.
Steell has a 650 that has a 1000 motor stuffed into the frame that had previously been put into it by another kzr member (sbjones) and if you need to see some close up pics perhaps they can help out if you ask real nice.
Cheers-Colin Firth-Ontario Canada
Your best bet is to pick up a tired 1984 Gpz750 engine, cylinders and head and put it onto your 650's bottom end. You might need to put in a new beefier clutch to handle the extra power. This Gpz engine was rated around 87 hp when new which is a significant step up from the 650's 64 hp. Get your hands on a Wiseco 810 kit, clean up the head and get a set of good carbs and ignition and you should be in the right power range of a stock Kz1000 which was around the mid 90's if I recall.
Shoehorning the engine into the frame and gussetting it to handle the oversized motor is doable but as mentioned earlier, any time you have to check valves or pull the valve cover to get to a little leak this will turn into a major project.
Steell has a 650 that has a 1000 motor stuffed into the frame that had previously been put into it by another kzr member (sbjones) and if you need to see some close up pics perhaps they can help out if you ask real nice.
Cheers-Colin Firth-Ontario Canada
-1977 Kz650 Custom bought new by brother. Now with 810 kit, GPz750 cams, intake valves, Mikuni 29 smoothbores, velocity stacks, Dyna Igntion, MAC pipe and other goodies.
-1982 Ferrari 308 GTSi Red/Tan
-Toyota FJ Cruiser - 6 speed tank
-2010 Mazda CX-7 Turbo (my bride's)
-1998 Jeep TJ Wrangler 4.0 litre for the kids
-1975 Zamboni - The real Italian sportscar fully restored and functioning every winter at our local outdoor playground rink.
Mine is an ecclectic collection of motorized toys - LOL
I have a newspaper route and a web site where you can plan your own funeral life celebration www.mysendoff.com ....and go out with your own style.
-1982 Ferrari 308 GTSi Red/Tan
-Toyota FJ Cruiser - 6 speed tank
-2010 Mazda CX-7 Turbo (my bride's)
-1998 Jeep TJ Wrangler 4.0 litre for the kids
-1975 Zamboni - The real Italian sportscar fully restored and functioning every winter at our local outdoor playground rink.
Mine is an ecclectic collection of motorized toys - LOL
I have a newspaper route and a web site where you can plan your own funeral life celebration www.mysendoff.com ....and go out with your own style.
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 10:12
reborn650 wrote:
Not yet
The 650 has a 750 bottom end bolted in it at the moment, the 1000 (81 KZ1000 CSR) donor is still sitting in Omaha awaiting transportation to here.
Do have a Wiseco 1105 kit, 1100 cylinder block, and GPz1100 cams waiting for it.
So if a 1000 has to much power for the 650 frame, then I guess the 1105 ought to have way to much power (too much is not enough)
The frame will be seriously reinforced prior to installation of the motor, and it has GSXR suspension front and rear which lessons the weight and should help.
It's certainly not going to be a daily driver
The above bike is GPzInfested's (my Nephew and partner in crime, who also owns the GPz750 Turbo, and the GPz750 motored 79 KZ650 SR with GPz750 suspension) I'm building a 810 KZ750E with GSX suspension and fuel injection for myself. I prefer something I can enjoy riding, not something that will yank my eyeballs out of their sockets every time I twist the throttle. :woohoo:
Guess that means I am getting old (and maybe wiser)
Post edited by: steell, at: 2007/10/27 13:13
Steell has a 650 that has a 1000 motor stuffed into the frame that had previously been put into it by another kzr member (sbjones) and if you need to see some close up pics perhaps they can help out if you ask real nice.
Cheers-Colin Firth-Ontario Canada
Not yet
The 650 has a 750 bottom end bolted in it at the moment, the 1000 (81 KZ1000 CSR) donor is still sitting in Omaha awaiting transportation to here.
Do have a Wiseco 1105 kit, 1100 cylinder block, and GPz1100 cams waiting for it.
So if a 1000 has to much power for the 650 frame, then I guess the 1105 ought to have way to much power (too much is not enough)
The frame will be seriously reinforced prior to installation of the motor, and it has GSXR suspension front and rear which lessons the weight and should help.
It's certainly not going to be a daily driver
The above bike is GPzInfested's (my Nephew and partner in crime, who also owns the GPz750 Turbo, and the GPz750 motored 79 KZ650 SR with GPz750 suspension) I'm building a 810 KZ750E with GSX suspension and fuel injection for myself. I prefer something I can enjoy riding, not something that will yank my eyeballs out of their sockets every time I twist the throttle. :woohoo:
Guess that means I am getting old (and maybe wiser)
Post edited by: steell, at: 2007/10/27 13:13
KD9JUR
Please Log in or Create an account to join the conversation.
- CruisingRam
-
- Offline
- User
-

Registered
- Posts: 643
- Thanks: 16
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 12:31
A member on the old Kzrider board- might still be archived there- stuffed, I believe, a Gpz 1100 motor into the 659 frame, and it fit quite nice- he canted the motor forward a bit to make motor in frame valve adjustments possible. It was one radical looking bike!
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Please Log in or Create an account to join the conversation.
- OnkelB
-
- Offline
- User
-

Registered
- Posts: 1011
- Thanks: 80
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 15:17
CruisingRam wrote:
Messenger1
Messenger1 part 2
One of my favorite builds ever.
A member on the old Kzrider board- might still be archived there- stuffed, I believe, a Gpz 1100 motor into the 659 frame, and it fit quite nice- he canted the motor forward a bit to make motor in frame valve adjustments possible. It was one radical looking bike!
Messenger1
Messenger1 part 2
One of my favorite builds ever.
77 KZ 650 B1, 82 GPz 1100 B2.
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: KZ1000 engine in KZ650 frame?
27 Oct 2007 19:10
Don't forget these two:
The Red one had a good write up in the archives I believe on the mods done to fit the motor.
The blue, Z Power, had a web site on the build, but it seems to be gone.
The Red one had a good write up in the archives I believe on the mods done to fit the motor.
The blue, Z Power, had a web site on the build, but it seems to be gone.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: KZ1000 engine in KZ650 frame?
04 Jun 2008 17:02
STREETFIGHTER Kawasaki z650 Gpz1170
on ebay UK.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: KZ1000 engine in KZ650 frame?
04 Jun 2008 17:03
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
