need help mounting my exhaust

  • genesis
  • genesis's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 70
  • Thanks: 0

need help mounting my exhaust

25 Nov 2007 18:20
#182657
Just got my 4-1 brandless exhaust mounted on my 78 650. It was for an 80 650 according to the guy I bought it off. the header went on fine, but the can is off from the stock mount by about 1/2 inch. what should I use to make a mount. I was thinking of getting a strip of steel, or some other metal and just drilling the bolt holes to make a sort of mount. any ideas or suggestions?
also, what is the proper way to mount the can to the header. I assume it should be welded, but can I get some sort of clamp to keep the exhaust from coming back out the cracks until I decide if I want to keep this can or not?:unsure:

Please Log in or Create an account to join the conversation.

  • rstnick
  • rstnick's Avatar
  • Offline
  • Premium Member
  • Premium Member
    Registered
  • Posts: 4691
  • Thanks: 576

Re: need help mounting my exhaust

25 Nov 2007 18:34
#182659
Any piece of metal that will take some vibration and not fatigue and break would be fine for a mount. Not too thin, to give it some strength.

Lots of pipes and cans are clamped together. As long as the two are a good fit/compatable size with no gaps, clamping tightly should do the trick.
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2

Please Log in or Create an account to join the conversation.

  • donthekawguy
  • donthekawguy's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1911
  • Thanks: 8

Re: need help mounting my exhaust

25 Nov 2007 18:35
#182660
You should be able to go to any Midas type place and get a clamp. Or maybe even a Napa store. A hose clamp won't work. As for the mount for the rear a small strip of steel with holes drilled will work.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125

Please Log in or Create an account to join the conversation.

  • genesis
  • genesis's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 70
  • Thanks: 0

Re: need help mounting my exhaust

25 Nov 2007 19:21
#182670
awesome, I'm so glad some of my ideas are starting to be good for this bike. It feels good to finally get my hands dirty. My wife even likes it (apparently it makes me smell manly;) )

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: need help mounting my exhaust

25 Nov 2007 20:15
#182673
genesis wrote:
Just got my 4-1 brandless exhaust mounted on my 78 650 ...header went on fine, but the can is off from the stock mount by about 1/2 inch. what should I use to make a mount. I was thinking of getting a strip of steel, or some other metal and just drilling the bolt holes to make a sort of mount. any ideas or suggestions? also, what is the proper way to mount the can to the header. I assume it should be welded, but can I get some sort of clamp to keep the exhaust from coming back out the cracks until I decide if I want to keep this can or not?:unsure:

Using a rubber isolator mount to affix can to hanger helps eliminate vibration transfer from can to bike frame. I've used then forever with great success. Available in various sizes. Here's an example.




Probably best not to weld, as welding eliminates ability to make exact fitment adjustments when installing. And if chrome, ruins the finish. Wouldn't use any sealer either. Small leaks usually self-seal after running a few miles.

Good luck!:)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • The Milkman
  • The Milkman's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 794
  • Thanks: 194

Re: need help mounting my exhaust

25 Nov 2007 20:24
#182675
On your 650 the nut that holds the muffler in the bracket on the footrest slides in the mount,, it won't slide far enough to line up with the mount on the muffler?
78 650-C2, Stock engine, Jardine 4-2 Exh., 17-38 sprockets, dyna ignition and coils, coil wiring mod, carb mod.
The following user(s) said Thank You: GPz550D1

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum