kz650 noisy top end...
- Kingcobra
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
kz650 noisy top end...
18 Mar 2008 16:48
not knocking or anything like that.... just seems I can hear the mechanicals a little too much... any idea why? kinda like a sewing machine sound... is it normal?
Please Log in or Create an account to join the conversation.
- The Milkman
-
- Offline
- User
-

Registered
- Posts: 794
- Thanks: 194
Re: kz650 noisy top end...
18 Mar 2008 17:04
It should be quiet, it sounds like your valves need adjusting. Check the guide spocket between the cams for play or roughness while spinning, also.
78 650-C2, Stock engine, Jardine 4-2 Exh., 17-38 sprockets, dyna ignition and coils, coil wiring mod, carb mod.
Please Log in or Create an account to join the conversation.
- flht1997
-
- Offline
- User
-

Registered
- Posts: 512
- Thanks: 2
Re: kz650 noisy top end...
18 Mar 2008 17:23
noisy valves are happy valves
but seriously i would start with a cam chain adjustment and check the valve clearance.
Matt Milwaukee, WI
75' KZ400, (5) 78' KZ400, 76' KZ 750, 78' KZ650
78'CB750F, 78' CB550K
89' BMW R100RT
05' H-D Electra Glide
06' KLR650
Do it right or don't bother doing it at all.
75' KZ400, (5) 78' KZ400, 76' KZ 750, 78' KZ650
78'CB750F, 78' CB550K
89' BMW R100RT
05' H-D Electra Glide
06' KLR650
Do it right or don't bother doing it at all.
Please Log in or Create an account to join the conversation.
- Kingcobra
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: kz650 noisy top end...
18 Mar 2008 19:26
ok thanks guys... how do you adjust the cam chain? 78 kz650b
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: kz650 noisy top end...
18 Mar 2008 20:06 - 18 Mar 2008 20:10
And might add to previous suggestions that properly synched carbs usually contribute to a smoother and quieter idle. 
P.S. And would also assure ignition timing is set to specs.
And that valve clearances are also within proper specs.
P.S. And would also assure ignition timing is set to specs.
And that valve clearances are also within proper specs.
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 18 Mar 2008 20:10 by Patton.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
