valve adjustment woes...

  • Kingcobra
  • Kingcobra's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 86
  • Thanks: 0

valve adjustment woes...

05 Apr 2008 15:54 - 05 Apr 2008 15:55
#204473
ok so recently I've noticed a bit of "noise" emitting from the top end of my engine... not ticking just "mechanical" noise... so I'm thinking it's time for a valve adjustment. pull the cover and start checking clearances. all valves on the exhaust cam are at .003... number 2 on the intake cam is at .003 also but the other 3 on the intake cam are so close I can't even fit the thinnest guage I have in there... almost zero clearance. is this my noise creator? and what would cause those 3 valves only to be out of spec?
Last edit: 05 Apr 2008 15:55 by Kingcobra.

Please Log in or Create an account to join the conversation.

  • Kingcobra
  • Kingcobra's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 86
  • Thanks: 0

Re: valve adjustment woes...

05 Apr 2008 15:54
#204474
78 kz650 B btw

Please Log in or Create an account to join the conversation.

  • KZQ
  • KZQ's Avatar
  • Offline
  • Administrator
  • Administrator
    Registered
  • Walking Behind the Corn May Not Be All That!
  • Posts: 5044
  • Thanks: 1957

Re: valve adjustment woes...

05 Apr 2008 16:20 - 05 Apr 2008 16:22
#204482
No, valves that are too tight are quieter than valves that are too loose.

I suggest that while you have it open inspect the cam chain guides and rollers. Then adjust your cam chain.


"what would cause those 3 valves only to be out of spec?"

These types of valve trains do get tighter with wear.

KZCSI
www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Honda Valkyrie, 2009 Yamaha Roadliner S. 1983 Honda GL 1100
Projects:
1985 ZN1300
Last edit: 05 Apr 2008 16:22 by KZQ.

Please Log in or Create an account to join the conversation.

  • Kingcobra
  • Kingcobra's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 86
  • Thanks: 0

Re: valve adjustment woes...

05 Apr 2008 16:24
#204483
ok will do... I was told to simply loosen the locknut then the bolt and then retighten. but then I was told the engine has to be rotated to a certain spot first or the chain won't be adjusted correctly. is this true?

Please Log in or Create an account to join the conversation.

  • 77_650B1
  • 77_650B1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 372
  • Thanks: 0

Re: valve adjustment woes...

05 Apr 2008 16:55
#204488
its true, its has to be rotated to the first corner on the timing plate down where your ignition is. go two complete revolutions, then go past all the timing marks on the 1,4 side, until the corner is lined up with the pointer. then loosen the locknut and re-tighten. if its quiet and you release it quickly enough, sometimes you'll hear a click, but not all the time.
1977 KZ650-B1
-Dual Discs
-Dyna-S
-WG Coil Mod
-Alloy Wheels

Please Log in or Create an account to join the conversation.

  • Kingcobra
  • Kingcobra's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 86
  • Thanks: 0

Re: valve adjustment woes...

05 Apr 2008 20:57
#204517
thank you for the info!

I was wondering... if the valvetrain is designed to get "tighter with wear" how do the valves get noisey when they near needing adjustment? what causes the noise?

Please Log in or Create an account to join the conversation.

  • RonKZ650
  • RonKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3719
  • Thanks: 252

Re: valve adjustment woes...

05 Apr 2008 21:06
#204519
Noise isn't the valves. They don't get noisy with age and miles. Noise is either cam tensioner problems or the idler sprockets or exhauast leaks. Exhaust leaks are probably the #1 valve noise.
321,000 miles on KZ's that I can remember. Not going to see any more.

Please Log in or Create an account to join the conversation.

  • Kingcobra
  • Kingcobra's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 86
  • Thanks: 0

Re: valve adjustment woes...

05 Apr 2008 21:24
#204523
tomorrow I'm going to adjust my camchain properly and see if the noise is still there... hopefully it isnt.

Please Log in or Create an account to join the conversation.

  • MCH650SR
  • MCH650SR's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 51
  • Thanks: 0

Re: valve adjustment woes...

06 Apr 2008 08:32
#204562
I don't think having some mechanical noises on these bikes is uncommon. They are using mechanical lifters so there will be some noise. Verses hydraulic lifters that will have very little noise.
1979 KZ650SR
modified with BS32 carbs
Yoshimura 4 in1
2006 Kawasaki Sherpa
1979 Honda CX500
BC Canada

Please Log in or Create an account to join the conversation.

  • davenkids2001
  • davenkids2001's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 2

Re: valve adjustment woes...

07 Apr 2008 06:14 - 07 Apr 2008 06:15
#204733
RonKZ650 wrote:
Noise isn't the valves. They don't get noisy with age and miles. Noise is either cam tensioner problems or the idler sprockets or exhauast leaks. Exhaust leaks are probably the #1 valve noise.

Kingcobra...this is good advise. A note about automatic cam chain tensioners...they fail. My bike had a lot of top-end noise too. No amount of maintenance could get it to work correctly, so I purchased a new MANUAL type adjuster from Z-1. Now I adjust it about once a year and the noise has gone away.
The advise about your valve clearences is also correct. I just did my valve lash adjustment and 5 of 8 valves were tighter than spec...just like everyone says will happen. I know it sounds counter-intuitive but the valve clearences will get tighter over time, rather than looser as you would find on a rocker-arm style valvetrain. I suggest buying a manual tensioner and reading up on how to perform a valve lash adjustment on underbucket shims.
BTW...you should add your bike and location info to your signature line. Then everyone will know what you have and can answer your questions accordingly.
Dave and Janet
Great Lake State
1979 650SR
Last edit: 07 Apr 2008 06:15 by davenkids2001.

Please Log in or Create an account to join the conversation.

  • BSKZ650
  • BSKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2061
  • Thanks: 14

Re: valve adjustment woes...

07 Apr 2008 06:25
#204736
Just about all valve adj will get tighter overtime,, the valve wears into the seat and the seat wears deeper in the head, thus a longer valve at the other end and tighter. this is a normal and good thing, ifthe ywent the other way I would be worried that something is going wrong with the cam or lifter bucket.

another thing that can cause a noise is the carbs being out of sync, it changes the cyl pressure and causes the cam chain to "rattle" so you may want to check that also
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum