oversized valves kz900

  • RedneckSamurai
  • RedneckSamurai's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 77
  • Thanks: 1

oversized valves kz900

03 May 2008 19:20 - 03 May 2008 19:22
#210969
I have what I believe are valves from a j model bike, they have 6.96mm stem and the faces measure 37.5mm for the intake and 32mm for the exhaust. My question is can a stock 900 head have the seats recut to accommodate these valves? My concern is the head I was gonna use has a helicoil in a sparkplug hole and when it was tapped it went into the valve seat slightly...I doesnt look like the difference in size would matter but looking for your opinions. Here is a picture you can barely see though [img size=600]
1977 KZ650
1976 KZ900ltd
1976 KZ900 A4
Last edit: 03 May 2008 19:22 by RedneckSamurai. Reason: pics

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: oversized valves kz900

03 May 2008 22:08
#211008
That will be close on the intake. The very early 900s could take a 32 exhaust, but thye rest, only 31.

You do know that J model / GPZ valves are shorter than your 900 valves.

Jay

Please Log in or Create an account to join the conversation.

  • RedneckSamurai
  • RedneckSamurai's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 77
  • Thanks: 1

Re: oversized valves kz900

04 May 2008 08:06
#211069
Thanks Jay, I was planning on putting some APE guides in. Anyhow, I did a quick measure on them and it seems the stock int. is 91.6mm and the exh. 90.2 the oversized are 90.5 int and 90mm exh.. The seats can be cut to accommodate the stem height, right? speaking of valve stem height, which jig do I need from APE or you could just gimme the measurements and I'll machine my own...lol. Thanks again
1977 KZ650
1976 KZ900ltd
1976 KZ900 A4

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: oversized valves kz900

04 May 2008 15:10
#211119
You will probably end up sinking them far enough when you are trying to get adaquate valve to valve ( .180" between the valves on the seat).

The stem gage you needs depends on the base circle diameter of your cams.

Be sure you have one of the early heads that will take the 32 ex valve, or cut it down to 31.

Jay

Please Log in or Create an account to join the conversation.

  • RedneckSamurai
  • RedneckSamurai's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 77
  • Thanks: 1

Re: oversized valves kz900

04 May 2008 17:41
#211149
So now the question is how can I tell if its one of the early heads?
1977 KZ650
1976 KZ900ltd
1976 KZ900 A4

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum