aluminum motor mounts
- wireman
-
Topic Author
- User
-

Public
- Thanks: 0
aluminum motor mounts
03 Feb 2006 09:06
does anyone out there know how thick aftermarket aluminum motor mounts are?ive made a few sets out of stainless and polished them,this time i want to make some from aluminum and anodize them.ive allready got oversized stainless steel allen heads ,drilled sleeves on frame from 5/16 to 3/8" just need to know how thick of material i need bought 1/4" to make covers for smog head would 3/8" work? :whistle:
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: aluminum motor mounts
03 Feb 2006 09:15
I think 3/8" is more than thick enough, I'm not sure about 5/16" though, so I'd use the 3/8".
KD9JUR
Please Log in or Create an account to join the conversation.
- wireman
-
Topic Author
- User
-

Public
- Thanks: 0
Re: aluminum motor mounts
03 Feb 2006 12:15
the motor mount sleeves on the frame are about 5/15" i.d where the bolts go through i opened mine up to 3/8" for bigger allen head bolts,im thinking about opening up the long ones to 7/16" also .i think ill pick up a sheet of 3/8 monday!:whistle:
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: aluminum motor mounts
20 Mar 2011 19:03
anyone know any sources for aftermarket aluminum motor mount kits ????
like the ones shown on here sometimes
like the ones shown on here sometimes
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: aluminum motor mounts
20 Mar 2011 20:26
again its been offered to have a bunch of kits made up but nobody shows up for the party,im not going to shell out to have a bunch of sets made if nobody wants them 
put up or shut up guys! :laugh:
put up or shut up guys! :laugh:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: aluminum motor mounts
20 Mar 2011 21:33
I'm in for two sets.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: aluminum motor mounts
20 Mar 2011 21:48 - 20 Mar 2011 21:51
Jim,
You can make them whatever thickness you want, within reason of course. Just adjust bolt lengths to suit. The bolts should also fit snug. That's the real problem to begin with. Sloppy holes won't hold the motor tight.
New Bolts should be part of the kit... Now if that means you have to include a drill bit to slightly ream the holes in the frame....then so be it. Charge accordingly. Just make sure the kit does what it was designed to cure in the first place. It won't matter if the plates are heavier if the bolts fit like the stock ones do....
[sloppy]
JMO
Larry C
You can make them whatever thickness you want, within reason of course. Just adjust bolt lengths to suit. The bolts should also fit snug. That's the real problem to begin with. Sloppy holes won't hold the motor tight.
New Bolts should be part of the kit... Now if that means you have to include a drill bit to slightly ream the holes in the frame....then so be it. Charge accordingly. Just make sure the kit does what it was designed to cure in the first place. It won't matter if the plates are heavier if the bolts fit like the stock ones do....
JMO
Larry C
Last edit: 20 Mar 2011 21:51 by larrycavan.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: aluminum motor mounts
20 Mar 2011 21:50
yep im planning on stainless bolts
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- DFIGPZ
-
- Offline
- User
-

Registered
- Posts: 615
- Thanks: 121
Re: aluminum motor mounts
20 Mar 2011 23:06 - 20 Mar 2011 23:20
how about these :
www.kosmanspecialties.com/images/kawa-mm-kit1.jpg
www.pingelonline.com/kawasaki_motor_mount.htm
and also D&G chassis www.dgchassis.net/Dragbike%20Motor%20Mou...ike-motor-mount.aspx
www.kosmanspecialties.com/images/kawa-mm-kit1.jpg
www.pingelonline.com/kawasaki_motor_mount.htm
and also D&G chassis www.dgchassis.net/Dragbike%20Motor%20Mou...ike-motor-mount.aspx
1984 750 Turbo
Last edit: 20 Mar 2011 23:20 by DFIGPZ.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: aluminum motor mounts
20 Mar 2011 23:07
alright craig wants a set of shrek motorsports mounts,who else? :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: aluminum motor mounts
20 Mar 2011 23:14 - 20 Mar 2011 23:44kosman hasnt stocked them in forever,not sure about pingle.DFIGPZ wrote: how about these :
www.kosmanspecialties.com/images/kawa-mm-kit1.jpg
www.pingelonline.com/kawasaki_motor_mount.htm
the ones i can have made are still cheaper than pingle,plus free shipping figured into price.
the d&g mounts are kind of rough looking,i guess it depends on how picky you are
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Last edit: 20 Mar 2011 23:44 by wireman.
Please Log in or Create an account to join the conversation.
- Stu Pidasole
-
- Offline
- User
-

Registered
- if you aint mod'n, you aint rock'n!
- Posts: 628
- Thanks: 1
Re: aluminum motor mounts
20 Mar 2011 23:14
just dont sell dangerouse kits plummi......i mean jim.....i mean omr.......ah, who knows these days.......lol
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
