Oil Cooler Lines - Help/Advice Needed
- Ilbikes
-
Topic Author
- Offline
- User
-

Registered
- Posts: 36
- Thanks: 0
Oil Cooler Lines - Help/Advice Needed
31 May 2008 17:45
Guys, I've now have the cooler (settled on a polished B&M Supercooler 4.5"x11"x1.5" - $55) and I've just won a set of NOS fittings on EBay. Now for the lines. I'm new to the four stroke Kaws, can some of you post photos of bikes with coolers and lines? I want to see how they are run and routed -
Help/input greatly appreciated.
Gordon
Help/input greatly appreciated.
Gordon
Please Log in or Create an account to join the conversation.
- Bullitt03737
-
- Offline
- User
-

Registered
- Posts: 122
- Thanks: 0
Re: Oil Cooler Lines - Help/Advice Needed
31 May 2008 18:15
Im going to be following your thread very closely. where did you get your cooler at?
1980 CSR 1000. New dyna Coils, Vacumn Less Petcock, Various Handle bars depending on the day, (Drag and Clubman.)
Please Log in or Create an account to join the conversation.
- Ilbikes
-
Topic Author
- Offline
- User
-

Registered
- Posts: 36
- Thanks: 0
Re: Oil Cooler Lines - Help/Advice Needed
31 May 2008 20:50 - 31 May 2008 20:52
Right here -
store.summitracing.com/partdetail.asp?au...221+115&autoview=sku
Here is a photo of my Honda and it's 11"x5"x1" cooler. I found this B&M a few days back.
store.summitracing.com/partdetail.asp?au...221+115&autoview=sku
Here is a photo of my Honda and it's 11"x5"x1" cooler. I found this B&M a few days back.
Last edit: 31 May 2008 20:52 by Ilbikes.
Please Log in or Create an account to join the conversation.
- Ilbikes
-
Topic Author
- Offline
- User
-

Registered
- Posts: 36
- Thanks: 0
Re: Oil Cooler Lines - Help/Advice Needed
31 May 2008 20:51Please Log in or Create an account to join the conversation.
- Z1109R Fin
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 2
Re: Oil Cooler Lines - Help/Advice Needed
02 Jun 2008 03:57
Z1000R ´83...Slightly modified...
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: Oil Cooler Lines - Help/Advice Needed
02 Jun 2008 04:59
mine run up under the tank, th PO installed the cooler, I have never had any issues with it at all, I will try to get a pick later
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- Premium Member
-

Registered
- Posts: 4691
- Thanks: 576
Re: Oil Cooler Lines - Help/Advice Needed
02 Jun 2008 06:39
Mine ran down the frame tubes and under the engine as the connections were on the bottom in my case.
It depends on what engine your dealing with.
It depends on what engine your dealing with.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2
Please Log in or Create an account to join the conversation.
- Ilbikes
-
Topic Author
- Offline
- User
-

Registered
- Posts: 36
- Thanks: 0
Re: Oil Cooler Lines - Help/Advice Needed
02 Jun 2008 09:49
Thanks guys - keep them coming. I would like to see all of the options out there.
Thanks,
Gordon
Thanks,
Gordon
Please Log in or Create an account to join the conversation.
- Z1109R Fin
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 2
Re: Oil Cooler Lines - Help/Advice Needed
03 Jun 2008 03:10
One thing to consider is of course the connections. That´s pretty important. And of course heat issue. Routing lines over the engine (as they are in stock ELR)could mean less effective cooling.
Z1000R ´83...Slightly modified...
Please Log in or Create an account to join the conversation.
- Ilbikes
-
Topic Author
- Offline
- User
-

Registered
- Posts: 36
- Thanks: 0
Re: Oil Cooler Lines - Help/Advice Needed
03 Jun 2008 08:25
Actually this will be a challenge I look forward to. I plan to have an attractive grill made for the cooler and I'll need to come up with a nice rubberized clamp system to go around the downtubes (like I did on the CB750 above). I think I want to go stealth with the lines and run them up and over the engine - then down between the carbs to the fittings behind the cylinders. I will likely use stainless tubing custom bent for the feed and return lines. These should blend into the engine color and be mostly hidden by the fuel tank when run above the cylinder head/cover. I'm not worried about the engine heat - if it doesn't ignite rubber fuel lines and gasoline, it sure won't bother the oil in the lines.
The radiator core is responsible for the heat exchange - I'm confident they work. The Honda has not let it's oil exceed 190 to date - even after some hard rides, 10.5:1 compression and summer heat. The Honda has the disadvantage of having it's lines run in parallel to the Kerker header pipes, but since the oil fiter and cooling adapter is front and center of the case - I really had little choice.
More ideas, please -
Gordon
The radiator core is responsible for the heat exchange - I'm confident they work. The Honda has not let it's oil exceed 190 to date - even after some hard rides, 10.5:1 compression and summer heat. The Honda has the disadvantage of having it's lines run in parallel to the Kerker header pipes, but since the oil fiter and cooling adapter is front and center of the case - I really had little choice.
More ideas, please -
Gordon
Please Log in or Create an account to join the conversation.
- Tyler
-
- Offline
- User
-

Registered
- Posts: 845
- Thanks: 92
Re: Oil Cooler Lines - Help/Advice Needed
03 Jun 2008 10:48
Do you guys install a check valve when you add these coolers to keep the oil from draining back?
If I knew what I was doing all the time life wouldn't be any fun.
'80 KZ650 E 700cc, dyna ignition and coils, frame up restoration, daily driver
'81 KZ1300 A3 full restoration, custom big bore pistons, 1400cc 6 cylinder super bike
"77 KZ650 B1 - Barn Find, work in progeress
"74 Yamaha DT 400 Enduro
'80 KZ650 E 700cc, dyna ignition and coils, frame up restoration, daily driver
'81 KZ1300 A3 full restoration, custom big bore pistons, 1400cc 6 cylinder super bike
"77 KZ650 B1 - Barn Find, work in progeress
"74 Yamaha DT 400 Enduro
Please Log in or Create an account to join the conversation.
- galaxian
-
- Offline
- User
-

Registered
- Posts: 335
- Thanks: 0
Re: Oil Cooler Lines - Help/Advice Needed
03 Jun 2008 12:58
Can someone post exact lengths of lines and what fittings they are using?
1977 KZ1000A1, 1979 KZ650 C3
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
