Valve clearances. How Critical??

  • TLH101
  • TLH101's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 81
  • Thanks: 0

Valve clearances. How Critical??

18 Jun 2008 20:04
#220799
The manual for my '78 KZ 650 calls for .15 mm valve clearance. How much tolerance will be acceptable? Most are at .12 or .13, however I have one at .08 and one at .20mm.
Thanks

Please Log in or Create an account to join the conversation.

  • mtkawboy
  • mtkawboy's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 822
  • Thanks: 16

Re: Valve clearances. How Critical??

18 Jun 2008 20:27
#220808
.08 to .18mm for my GPZ750, loose is better then tight
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Valve clearances. How Critical??

18 Jun 2008 23:20
#220833
.05 - 0.10 mm for the 750 twin. That's .002" - .004", I keep mine in the range of .003 - .005".

A shade loose won't hurt, but a shade tight will cause the valve and valve seat to burn up and your head is toasted.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Valve clearances. How Critical??

18 Jun 2008 23:23
#220834
TLH101 wrote:
The manual for my '78 KZ 650 calls for .15 mm valve clearance. How much tolerance will be acceptable? Most are at .12 or .13, however I have one at .08 and one at .20mm.
Thanks
I'm surprised the manual doesn't give a min/max range. The 0.08 - 0.18 mm number sounds reasonable, but the manual should say.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • larrycavan
  • larrycavan's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Valve clearances. How Critical??

19 Jun 2008 05:44
#220863
TLH101 wrote:
The manual for my '78 KZ 650 calls for .15 mm valve clearance. How much tolerance will be acceptable? Most are at .12 or .13, however I have one at .08 and one at .20mm.
Thanks

If the .08mm is on the exhaust side it's time to do the adjustment. That = .003" of cold clearance which is getting a little tight.

If not, those are temporarily, runnable clearances. What it can do though is cause uneven cylinder compression.

I suggest a tune up with carb synch is in the near future.

Please Log in or Create an account to join the conversation.

  • TLH101
  • TLH101's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 81
  • Thanks: 0

Re: Valve clearances. How Critical??

19 Jun 2008 07:21
#220870
The clearances I have noted are "absolute" cold. Engine has not been started in quite a while.

Please Log in or Create an account to join the conversation.

  • wiredgeorge
  • wiredgeorge's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5298
  • Thanks: 46

Re: Valve clearances. How Critical??

19 Jun 2008 07:29
#220872
If the valves are tight, they will only get tighter and once they are tight enough, the uneven cylinder compression will become no compression. Buy some shims in kit form from z1enterprises.com and pop the valve cover and get to it!
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Valve clearances. How Critical??

19 Jun 2008 12:31
#220940
wiredgeorge wrote:
If the valves are tight, they will only get tighter and once they are tight enough, the uneven cylinder compression will become no compression. Buy some shims in kit form from z1enterprises.com and pop the valve cover and get to it!

And thank the Lord your engine uses the shims that are still available, not the 32 mm shims nobody sells anymore that go in my engine.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • mtkawboy
  • mtkawboy's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 822
  • Thanks: 16

Re: Valve clearances. How Critical??

19 Jun 2008 13:33
#220946
The .08 to.18 is from a factory shop manual. What size are the Z1/KZ900/1000 shims, I have a ton of them ?
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned

Please Log in or Create an account to join the conversation.

  • TLH101
  • TLH101's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 81
  • Thanks: 0

Re: Valve clearances. How Critical??

19 Jun 2008 15:17
#220960
Thanks for the feedback. The .08-.18 number was what I needed. I have a Clymer manual, & it only said .15. I knew there needed to be some leeway. I can swap a couple of shims and get all the clearances where they need to be.
Thanks

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum