stuck cylinder barrel
- KaZooCruiser
-
Topic Author
- Offline
- User
-

Registered
- Posts: 456
- Thanks: 7
stuck cylinder barrel
11 Jul 2008 10:56
This is a generic question. This is an excellent forum, where people actually respond because Stein made it a working resource base. Thanks Stein.
I'm going to search the archives in the meantime, but maybe somewhere around here someone can tell me how to get a two-cylinder barrel off the case.
I've already succeeded in breaking two fins. :lol:
It's a 1970 or '71 Honda CB-350.
Thanks in advance.
I'm going to search the archives in the meantime, but maybe somewhere around here someone can tell me how to get a two-cylinder barrel off the case.
I've already succeeded in breaking two fins. :lol:
It's a 1970 or '71 Honda CB-350.
Thanks in advance.
Please Log in or Create an account to join the conversation.
- coppertales
-
- Offline
- User
-

Registered
- Posts: 321
- Thanks: 0
Re: stuck cylinder barrel
11 Jul 2008 13:09
I had a CB350....gee, that was a long time ago. I never did anything to it except tune it up. Anyway, on the Kaw 4 cylinder bikes, there is a slot just behind the extreme left and right forward stud between the case and cylinders where a screwdriver can be used to gently pry the cylinders to separate them from the case. You will have a real adventure removing the old gasket and sealer.....chris3
1982 KZ1100 A2
1982 1100 SPECTRE
1982 1100 SPECTRE
1982 1100 SPECTRE
1982 1100 SPECTRE
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- KaZooCruiser
-
Topic Author
- Offline
- User
-

Registered
- Posts: 456
- Thanks: 7
Re: stuck cylinder barrel
12 Jul 2008 05:16
Thanks for the responses . . . got it off last night.
No pry points, and, if the motor hadn't been locked up due to moisture intrusion because the carbs were off and water got into it . . . well, maybe that might have worked to pop it loose . . . since I got the pistons loose.
Motor out of frame, head off, motor flipped over, wood 3 foot 2x4 against exhaust side center and 24 oz hammer smacks persuaded the thing to give up its' stubborn tenacity to hold onto a non-working existance.
Next step in this adventure is finding if pistons from a 400cc anything will work.
No pry points, and, if the motor hadn't been locked up due to moisture intrusion because the carbs were off and water got into it . . . well, maybe that might have worked to pop it loose . . . since I got the pistons loose.
Motor out of frame, head off, motor flipped over, wood 3 foot 2x4 against exhaust side center and 24 oz hammer smacks persuaded the thing to give up its' stubborn tenacity to hold onto a non-working existance.
Next step in this adventure is finding if pistons from a 400cc anything will work.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
