Can't stop it from smoking!

  • KzRider100
  • KzRider100's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Can't stop it from smoking!

27 Jul 2008 22:36
#228627
Hello everyone! I have an issue. I restored my '78 KZ650C2 a year ago, and when I had finished, I started it up, and it wouldn't stop smoking (a light smoke, white, with a little unburnt fuel as well) from the left-hand exhaust. I have a Mac 4 into 2 system. The smoking had to be from the first two cylinders. So, I did what I could with the tools I had, and failed to fix it. So I sent in to a dealer who spent a week on it, and $1000 of labor later, they told me they couldn't figure it out. So here's the Challenge, and what I've done so far. Light smoking from the 1st or second cylinder, and no other issues. My most recent conclusion was that the piston rings needed to be replaced. I finished them tonight, fired it up and it ran like new. Except, it still SMOKES!!! I'm sure you can sense my frustration with this issue, and if anyone would like to share any thoughts or suggestions, they would be MUCH appreciated! I'm dying to ride it, but I'm hitting a brick wall. Please note that I am running year old fuel in the tank with the addition of SeaFoam. Thanks for reading!

Please Log in or Create an account to join the conversation.

  • KOOL RYDER
  • KOOL RYDER's Avatar
  • Offline
  • User
  • User
    Registered
  • KZ 650B2 / KZ 1000E
  • Posts: 262
  • Thanks: 0

Re: Can't stop it from smoking!

27 Jul 2008 22:48
#228628
Drain the tank and replace with new fuel.
Drain the carb bowls.
Put some new plugs in her and let her run at idle for a while and watch for the smoke.

What is the idle like? is it high?

How high is the oil level?

WHen I add oil to my bike it puffs a little white smoke until I go a mile or so and then dissapears for good.

Good luck bro
Rockin\' a KZ650B2 since 2007 and a KZ 1000E since 2008

1978 KZ650B
1979 KZ1000ST

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Can't stop it from smoking!

27 Jul 2008 23:56 - 27 Jul 2008 23:59
#228635
KzRider100 wrote:
I started it up, and it wouldn't stop smoking (a light smoke, white, with a little unburnt fuel as well) from the left-hand exhaust.
Might be a valve seal. Those let a little oil get by, can cause light oil smoke.

KzRider100 wrote:
So I sent in to a dealer who spent a week on it, and $1000 of labor later, they told me they couldn't figure it out.
I would be kicking their ass with both feet. They are supposed to know what they are doing, not experiment at your expense.

Exactly what work did they do?

KzRider100 wrote:
My most recent conclusion was that the piston rings needed to be replaced.
Usually, ring blow by is characterized by heavy smoke when you accelerate hard and then hardly any when you let off the gas.

KzRider100 wrote:
I'm dying to ride it, but I'm hitting a brick wall. Please note that I am running year old fuel in the tank with the addition of SeaFoam. Thanks for reading!

DEFINITELY drain the tank and rinse it with clean gas before spending another penny on repairs. Run clean gas down the bowls and drain them.

If the dealer's thousand dollar adventure did not include these, do them:

tune up (points, plugs, timing)

check valve clearance
1979 KZ-750 Twin
Last edit: 27 Jul 2008 23:59 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • babyELR
  • babyELR's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 36
  • Thanks: 0

Re: Can't stop it from smoking!

28 Jul 2008 04:27
#228643
What do the plugs look like on those two cylinders? You may also have a bad valve seal leaking oil into the piston causing the smoke.
current bike:
1982 GPZ-750
past bikes:
1978 Z1-R
1982 KZ-550, 615 kit, cams, head-work
1978 GS-1000 drag bike (younger days fun)

Please Log in or Create an account to join the conversation.

  • KzRider100
  • KzRider100's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Re: Can't stop it from smoking!

28 Jul 2008 08:14
#228677
"Quote: What do the plugs look like on those two cylinders? You may also have a bad valve seal leaking oil into the piston causing the smoke."

I checked them a little while ago, and they seemed fine, but I'll check again and see what's up. Thanks.

"Quote: I would be kicking their ass with both feet. They are supposed to know what they are doing, not experiment at your expense."

I agree! My wife had a fit when she heard what happened. I just dug up the receipt and here it goes:
- DAIG Low Compression - $40
- DAIG Oil Pressure light - $40
- DAIG No Crank ( ??? ) - $40
- Tune and Service - $300
- Carb Clean - $300
- Repair wiring ( which was just a Zip-Tie job ): $110
- Repair cable routing ( same thing )
And now that you mention it, they told me they checked the valve clearances, but didn't charge me... I guess that might be the Low Compression DIAG.
Parts were the rest of the charges. ARGH!

I'll put clean gas it there and see what happens, Thanks!

"Quote: What is the idle like? is it high?"

The idle is perfect. When it starts up, its about 1200-1500rpms, and then when it warms up, it's smooth at about 500.

"Quote: How high is the oil level?"

After running it for a while, the oil was about half way up the little window. I think I put in about 3.25 quarts.
Thanks.

Please Log in or Create an account to join the conversation.

  • BSKZ650
  • BSKZ650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2061
  • Thanks: 14

Re: Can't stop it from smoking!

28 Jul 2008 08:30
#228680
I think a investment in a few tools is needed, ie a good compression gauge, feeler gauges, and timing light.

run the basic tests yourself, this will help set up a base line for what is going on with the motor.

also since you said you replace the rings, did you check the cyls and hone them correctly?
also where did you get a set of standard rings? I Aam going out on a limb here thinking it is still standard bore.
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob

Please Log in or Create an account to join the conversation.

  • coppertales
  • coppertales's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 321
  • Thanks: 0

Re: Can't stop it from smoking!

28 Jul 2008 08:46
#228684
My man, you got taken for a ride by the dealer. I used to stop in and chat with the local dealer here but I found out fast no one there knows anything about these old bikes.....chris3
1982 KZ1100 A2
1982 1100 SPECTRE
1982 1100 SPECTRE

Please Log in or Create an account to join the conversation.

  • littlemanonbigbike
  • littlemanonbigbike's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 75
  • Thanks: 0

Re: Can't stop it from smoking!

28 Jul 2008 09:36
#228700
Mine never smoked until i put seafoam in it. It quit smoking after i ran a tank of gas thru it.
1982 1100 Spectre
Various other toys

Please Log in or Create an account to join the conversation.

  • KOOL RYDER
  • KOOL RYDER's Avatar
  • Offline
  • User
  • User
    Registered
  • KZ 650B2 / KZ 1000E
  • Posts: 262
  • Thanks: 0

Re: Can't stop it from smoking!

28 Jul 2008 10:03
#228710
The local shops are useless.

I have been through 3 shops so far and have never really been pleased with the outcome.

It is pretty much drop your bike off, wait 2 weeks, pay a bucket load of cash, and then find out how fix what they buggered up or find out what else they did over the next 2 weeks.

My favorite experience comes when you put your bike in for a new tire and then a week later you get a call telling you that you need new bearings, steering head rebuilt, new rims, yada yada yada......

Oh yeah , the last time I brought my bike in I rode it to the shop, I had put 6000Km on it since I bought it, no problems, then the guy at the shop tells me he couldn't start it and had to pull the plugs and the carb floats to get it to run.

What the F? Anyways the only way to run one of these machines is to learn how to do the work yourself, by the end of the day if you go the shop route then you might as well go buy a brand new bike for all of the money you could spend at the "local" shop.

I finally found a guy who used to drag KZ's back in the day and he know what he is doing, but I mean $110 /hour.
Thankfully I know he is legit.
Rockin\' a KZ650B2 since 2007 and a KZ 1000E since 2008

1978 KZ650B
1979 KZ1000ST

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Can't stop it from smoking!

28 Jul 2008 12:34
#228731
coppertales wrote:
My man, you got taken for a ride by the dealer. I used to stop in and chat with the local dealer here but I found out fast no one there knows anything about these old bikes.....chris3
My dealer would charge you for that......:laugh:
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Can't stop it from smoking!

28 Jul 2008 12:37
#228732
KzRider100 wrote:
My most recent conclusion was that the piston rings needed to be replaced. I finished them tonight, fired it up and it ran like new. Except, it still SMOKES!!!

When you had the head off, did you notice any gunky oil build up near the valves of the smoking cylinders? A bad seal lets oil run down into the cylinder past the valve seat and burned oil usually builds up in that area. It can also foul the spark plugs.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Can't stop it from smoking!

28 Jul 2008 12:55
#228738
The valve guides and or seals may be the next thing to look at. Old seals can dry up and crack letting oil foul plugs and having white smoke from the exhaust.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum