900 crank in a 1000??
- Bicycle Lee
-
Topic Author
- Offline
- User
-

Registered
- Posts: 319
- Thanks: 0
900 crank in a 1000??
20 Sep 2008 08:46
So a guy mentioned to me that a relatively inexpensive way to give my KZ1000 a little pick up was to swap out my stock crank with a stock 900 crank from a 70's KZ900. Anyone heard of this? Anyone have any opinions and/or proof to back this up?
1978 KZ1000 police
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 900 crank in a 1000??
20 Sep 2008 10:13
it will definately let it rev quickerbut will also vibrate/buzz a little more.i might suggest a little longer swingarm because your bike will tend to aim for the stars after this mod when you lay into it hard !:laugh:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- Bicycle Lee
-
Topic Author
- Offline
- User
-

Registered
- Posts: 319
- Thanks: 0
Please Log in or Create an account to join the conversation.
- martijn
-
- Offline
- User
-

Registered
- Posts: 160
- Thanks: 1
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: 900 crank in a 1000??
20 Sep 2008 18:23
it depends on what you want to do with it,if its a daily driver i wouldnt go to all the trouble involved unless i was tearing motor down for a rebuild.you could do some headwork and maybe a small set of cams a lot cheaper and easier.biggest advantage of the 900 crank is its lighter and lets motor rev easier,but if the motor is choked down upstairs it will just run out of breathe a little quicker
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- mtkawboy
-
- Offline
- User
-

Registered
- Posts: 822
- Thanks: 16
Re: 900 crank in a 1000??
21 Sep 2008 10:48
Might be worthwhile in a race motor, wont do squat on a stocker in mho
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: 900 crank in a 1000??
21 Sep 2008 16:01
I have to agree with Plummen and others...
Unless you're trying to shave weight for serious racing what will it gain you. I mean, for what, 5 to 10 pounds if that, ain't going to do a damn thing that would be seriously noticeable.
Hell, save yourself the head ache for by changing your cam, carb's and exhaust/baffle will buy you way more power than required for daily riding than messing around with your crank.
Then again, WTF do I know, please dis-regard if I'm talking out my ass....
OMR
Unless you're trying to shave weight for serious racing what will it gain you. I mean, for what, 5 to 10 pounds if that, ain't going to do a damn thing that would be seriously noticeable.
Hell, save yourself the head ache for by changing your cam, carb's and exhaust/baffle will buy you way more power than required for daily riding than messing around with your crank.
Then again, WTF do I know, please dis-regard if I'm talking out my ass....
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- trippivot
-
- Offline
- User
-

Registered
- Posts: 399
- Thanks: 3
Re: 900 crank in a 1000??
22 Sep 2008 07:41
it is not inexpensive but HELL YEAH!!! this is a performance enhancement!!!
less rotating mass(6lbs approx.)will let the bike rev much quicker even with stock compression and stock valve sizes.
get it matched with a good gear on the final drive and you'll be hovering the front wheel on serious acceleration.
z-1 is 37 lbs and the other kz 1000 are 43 approx
good start on the basics of a fast engine. welded crank and back cut 2 and 3 gear in the trans.
less rotating mass(6lbs approx.)will let the bike rev much quicker even with stock compression and stock valve sizes.
get it matched with a good gear on the final drive and you'll be hovering the front wheel on serious acceleration.
z-1 is 37 lbs and the other kz 1000 are 43 approx
good start on the basics of a fast engine. welded crank and back cut 2 and 3 gear in the trans.
Please Log in or Create an account to join the conversation.
- mtkawboy
-
- Offline
- User
-

Registered
- Posts: 822
- Thanks: 16
Re: 900 crank in a 1000??
23 Sep 2008 10:35 - 23 Sep 2008 10:38
Maybe I read it wrong but it doesnt sound like a race motor to me, hes asking for a little more power in a stocker. There are lots better ways to do that then changing cranks. I doubt you could tell the difference in a stocker. Thats my opinion anyway. I have a stock Z1 and one powered by a 77 1000. There is no difference in power I can feel and I have 28mm carbs on the 1000 motor. Your bike & money, have at it
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned
Last edit: 23 Sep 2008 10:38 by mtkawboy.
Please Log in or Create an account to join the conversation.
- Bicycle Lee
-
Topic Author
- Offline
- User
-

Registered
- Posts: 319
- Thanks: 0
Re: 900 crank in a 1000??
23 Sep 2008 17:20
I was just asking what people thought. It isn't something I'm seriously considering, but I was just curious what people thought.
I am keeping this motor pretty much stock. Hell, at this point if the bike ever starts again I'll be pretty damned surprised.
I am keeping this motor pretty much stock. Hell, at this point if the bike ever starts again I'll be pretty damned surprised.
1978 KZ1000 police
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
-

Public
- Thanks: 0
Re: 900 crank in a 1000??
23 Sep 2008 17:34 - 23 Sep 2008 17:39
Bicycle Lee wrote:
C'mon now....don't write yourself because of a couple setbacks. You're not the first and won't be the last to have things go wrong. Learn from the mistake and move forward with knowledge. That's how all the pros do it..belive me, they break shit all the time to get ahead!

PS - It will rev quicker with a 900 crank and as a result, more RPM sooner, will accelerate a little better. Certainly not the most prudent route to stronger acceleration though. Power though, comes from the top end mods. Even drop in cams will give you a nice boost.
You can take these motors from mild to totally absurd and anything in between:)
I was just asking what people thought. It isn't something I'm seriously considering, but I was just curious what people thought.
I am keeping this motor pretty much stock. Hell, at this point if the bike ever starts again I'll be pretty damned surprised.
C'mon now....don't write yourself because of a couple setbacks. You're not the first and won't be the last to have things go wrong. Learn from the mistake and move forward with knowledge. That's how all the pros do it..belive me, they break shit all the time to get ahead!
PS - It will rev quicker with a 900 crank and as a result, more RPM sooner, will accelerate a little better. Certainly not the most prudent route to stronger acceleration though. Power though, comes from the top end mods. Even drop in cams will give you a nice boost.
You can take these motors from mild to totally absurd and anything in between:)
Last edit: 23 Sep 2008 17:39 by larrycavan.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
