clutch grabs
- mark1122
-
Topic Author
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
clutch grabs
19 Oct 2008 15:26
I have a new clutch cable on my bike. I broke the old 1 last season. It worked fine until now. i have only a couple thousand miles on it. The clutch just started to grab a bit yesterday.
if i am at a stop light it will not engage smoothly. it feels grabby. if i let it out a bit it will start to engage then as i continue to let it out nothing happens, then a bit further out it will grab hard?
I oiled the cable this morning and it continues to get worse.
Any ideas?
if i am at a stop light it will not engage smoothly. it feels grabby. if i let it out a bit it will start to engage then as i continue to let it out nothing happens, then a bit further out it will grab hard?
I oiled the cable this morning and it continues to get worse.
Any ideas?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: clutch grabs
19 Oct 2008 15:28
what oil are you useing and when was the last time you did an oil change.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- mark1122
-
Topic Author
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: clutch grabs
19 Oct 2008 15:36
Castrol GT 20w50 motorcycle oil.changed 400 miles ago.
it worked fine till now.oil temp guage shows 220*F after a cruise today.
it worked fine till now.oil temp guage shows 220*F after a cruise today.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: clutch grabs
19 Oct 2008 16:27 - 19 Oct 2008 16:33
is your temp gauge mounted in your filler plug because that oil temp seems to be a bit high. pull your plates and see if they are blued or when im at the track and something like that happens i'll pull the clutch and im almost guarenteed that the 2 inside fibers will be broken. iknow your on a street bike but that motor of yours is pretty big and tourqey so who knows. after i did that i would drop the oil and try it again. you know the old saying oil is cheap parts aren't.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Last edit: 19 Oct 2008 16:33 by timebomb33.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: clutch grabs
19 Oct 2008 18:07
If not already done, would perform clutch push rod adjustment.
This adjustment may not help if grab isn't being caused by heat from slippage, but won't hurt.
Good Luck!
This adjustment may not help if grab isn't being caused by heat from slippage, but won't hurt.
Good Luck!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: clutch grabs
19 Oct 2008 21:55
one other question i have for you is what kind of clutch are you using.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- mark1122
-
Topic Author
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: clutch grabs
20 Oct 2008 04:52 - 20 Oct 2008 05:08
I'm using APE an clutch.
I have a thermometer in the oil gallery plug.
I guess I’ll just have to find the time to take it apart and check the actuator and plates.
I thought i would have too . I was just hoping there was some simple answer . lol. not usually.
I have a thermometer in the oil gallery plug.
I guess I’ll just have to find the time to take it apart and check the actuator and plates.
I thought i would have too . I was just hoping there was some simple answer . lol. not usually.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 20 Oct 2008 05:08 by mark1122.
Please Log in or Create an account to join the conversation.
- Sandy
-
- Offline
- User
-

Registered
- Fly High,Tony
- Posts: 2448
- Thanks: 13
Re: clutch grabs
20 Oct 2008 07:34
Just a shot in the dark,Mark...clutch-spring bolts...has one(or more) come loose?
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- Mark Wing
-
- Offline
- User
-

Registered
- Posts: 1695
- Thanks: 22
Re: clutch grabs
20 Oct 2008 08:40
I've had a grabby clutch when ever I use other than Kawasaki clutch discs. A buddy of mine has a high 7's low 8's drag bike and swears by Kawasaki discs.
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Please Log in or Create an account to join the conversation.
- Sandy
-
- Offline
- User
-

Registered
- Fly High,Tony
- Posts: 2448
- Thanks: 13
Re: clutch grabs
20 Oct 2008 08:52
Been using the A.P.E. clutch with heavy springs for 2 seasons now anyway,and no problems.
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: clutch grabs
20 Oct 2008 10:12
Patton wrote:
Probably already been done. That's exactly why the clutch is all messed up.
If not already done, would perform clutch push rod adjustment)
Probably already been done. That's exactly why the clutch is all messed up.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- mark1122
-
Topic Author
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: clutch grabs
08 Nov 2008 15:07
I think i found the problem.
I removed the APE clutch plates, and heavy springs. The APE plates have 2 more plates than stock.Therefore the fiber plates are thinner. I noticed that the outer fingers of the fiber plates have worn grooves into where they contact the basket. These fingers if u will , must slide on the basket as they move in and out. the extra torque of my 1327cc's has worn these grooves so the plates grab as they try to travel.The springs have also started to ware grooves into the holes were they reside.
I put the stock plates and springs back in and ran it up and down the driveway. It seems fine now , but a longer ride is needed to be sure.
i will have to remove the basket and file the ridges smooth to complete the job over the winter.
I removed the APE clutch plates, and heavy springs. The APE plates have 2 more plates than stock.Therefore the fiber plates are thinner. I noticed that the outer fingers of the fiber plates have worn grooves into where they contact the basket. These fingers if u will , must slide on the basket as they move in and out. the extra torque of my 1327cc's has worn these grooves so the plates grab as they try to travel.The springs have also started to ware grooves into the holes were they reside.
I put the stock plates and springs back in and ran it up and down the driveway. It seems fine now , but a longer ride is needed to be sure.
i will have to remove the basket and file the ridges smooth to complete the job over the winter.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
