Exhaust tuning complete
- Exitpupil
-
Topic Author
- Offline
- User
-

Registered
- Posts: 143
- Thanks: 0
Exhaust tuning complete
23 Oct 2008 12:03 - 23 Oct 2008 12:06
I finally finished my exhaust tuning. I was inspired by some posts and comments by forum members. I have a KZ1075 (10.25:1), K410 cams, high velocity ported head, BS34 carbs, and V&H 4 into 1 exhaust. I removed the exhaust baffle and noted more top end power but with a stutter from 2K-4K rpm. So I bought a V&H performance baffle and the bike ran great, pulling smooth and strong from 2K-11K rpm, but with considerable noise increase over the street baffle. The street baffle was 1.5" and the performance baffle was 2" and also shorter allowing a larger expansion area between the collector and the baffle. Here is a pic of the 2" baffle (top)homemade baffle(mid) and the 1.5" street baffle(after cutting in two)
Both V&H baffles had abrupt transitions into the exit pipe. So I bought a long mild steel transition from Burns Stainless Steel. I also bought some 1.625" perforated screen pipe. I made my own baffle using the long transition modified to fit the 1.625 pipe welded to the perforated 1.625 pipe thinking the smooth transition with slightly larger pipe would give good scavaging and reduced noise. I also made a special long shaft rotary cutting burr and removed horrible interior overhanging lips at the megaphone joint welds. Well it worked! I still have the power of the 2" baffle with a noise level much closer to the 1.5" pipe. Time to ride ride ride.
Both V&H baffles had abrupt transitions into the exit pipe. So I bought a long mild steel transition from Burns Stainless Steel. I also bought some 1.625" perforated screen pipe. I made my own baffle using the long transition modified to fit the 1.625 pipe welded to the perforated 1.625 pipe thinking the smooth transition with slightly larger pipe would give good scavaging and reduced noise. I also made a special long shaft rotary cutting burr and removed horrible interior overhanging lips at the megaphone joint welds. Well it worked! I still have the power of the 2" baffle with a noise level much closer to the 1.5" pipe. Time to ride ride ride.
79 KZ1000 LTD B3, 1075 kit, BS34 carbs, high velocity ported heads, K410 cams, V&H pipe w/custom baffle
Last edit: 23 Oct 2008 12:06 by Exitpupil.
Please Log in or Create an account to join the conversation.
- SPARKY47
-
- Offline
- User
-

Registered
- 1980 KZ500 B2
- Posts: 415
- Thanks: 5
Re: Exhaust tuning complete
23 Oct 2008 12:09 - 23 Oct 2008 12:10
You need an objective opinion.
BRING IT TO ME!!!
Nice to see the finer points being addressed.
Vid....? Ah go-on....please?
BRING IT TO ME!!!
Nice to see the finer points being addressed.
Vid....? Ah go-on....please?
1980 KZ500 B2
Location: Middle England[/b
Location: Middle England[/b
Last edit: 23 Oct 2008 12:10 by SPARKY47.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Exhaust tuning complete
23 Oct 2008 12:44 - 27 Oct 2008 05:23
back in my day this was how we tuned the exhuast in the school parking lot!school buses got the big baffles ,while mr z's stationwagon got the smaller baffle!:woohoo:
Still recovering,some days are better than others.
Last edit: 27 Oct 2008 05:23 by PLUMMEN.
Please Log in or Create an account to join the conversation.
- guitargeek
-
- Offline
- User
-

Registered
- Elitist, arrogant, intolerant, self absorbed.
- Posts: 1182
- Thanks: 50
Re: Exhaust tuning complete
24 Oct 2008 18:09
Very interesting...
1980 KZ750-H1 (slightly altered)
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
Please Log in or Create an account to join the conversation.
- davel
-
- Offline
- User
-

Registered
- Posts: 209
- Thanks: 0
Re: Exhaust tuning complete
24 Oct 2008 18:40
Nice job Will! Can you post another image showing the right side of the baffles where you welded the transition tube. On the image you posted I can only see the exit side of the baffle. Thanks.
Please Log in or Create an account to join the conversation.
- guitargeek
-
- Offline
- User
-

Registered
- Elitist, arrogant, intolerant, self absorbed.
- Posts: 1182
- Thanks: 50
Re: Exhaust tuning complete
24 Oct 2008 22:41
Also, how about a couple shots from different angles, and with a measuring tape next to them.
Good work!
Good work!
1980 KZ750-H1 (slightly altered)
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
