have questions need answers
- quader98
-
Topic Author
- Offline
- User
-

Registered
- Posts: 290
- Thanks: 1
have questions need answers
05 Nov 2008 15:54
hello,my clutch slipped on me over the summer,adjusted it and it worked fine for a little while then it slipped again before i put it away so over the winter i wanna change the clutch out but i don't know which parts to get.do i get the individual plates and springs from z1 or do i get the ape kit from z1 that comes with an extra fiber plate and 1 metal or do i get the barnett kit on ebay that comes with everything...please help
Ernie from central jersey
82 GPZ 750 R1
looking to part out my 81 KZ750E2
82 GPZ 750 R1
looking to part out my 81 KZ750E2
Please Log in or Create an account to join the conversation.
- guitargeek
-
- Offline
- User
-

Registered
- Elitist, arrogant, intolerant, self absorbed.
- Posts: 1182
- Thanks: 50
Re: have questions need answers
05 Nov 2008 17:40
Do you race your bike? If not, I'd say just get the plates. Use sandpaper to break the glaze on the steel plates. I did this, didn't replace my springs, and my clutch hasn't slipped once since then, even after the rebuild with the ported head.
1980 KZ750-H1 (slightly altered)
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"
Please Log in or Create an account to join the conversation.
- bill_wilcox100
-
- Offline
- User
-

Registered
- Posts: 1115
- Thanks: 6
Re: have questions need answers
05 Nov 2008 17:42
When I changed mine, 3 years ago, I changed all the plates and got new springs. Still working great today. 
Remember, don't use any Low Friction engine oils or Low Friction additives or you will have slippage on your new plates.
Best of success.
Remember, don't use any Low Friction engine oils or Low Friction additives or you will have slippage on your new plates.
Best of success.
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: have questions need answers
05 Nov 2008 19:58
if you have accsess to a bead blaster blast your steel plates as long as they are not warped when you blast them it give a bit more surface area for the oil to adhere to if your fiber plates measure in spec. and they have no pieces missing and look alright you should be able to keep using them. the stock springs should be good if they measure in spec and are square.i use used plates in my dragbikes and hillcimber and the only time i've ever burnt a clutch was because of improper adjustment or thru a bad experiment with oil brands and type. if i hurt a clutch it's because i've broken plates.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: have questions need answers
05 Nov 2008 22:51
Springs are cheap, put in new ones if you do a clutch job. The springs on mine went south at about 50k miles.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: have questions need answers
06 Nov 2008 02:03
Can't go wrong with the Barnett kit... As you wrote includes everything you need including springs! 
OMR
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: have questions need answers
06 Nov 2008 05:16
The Barrnett is a good clutch, stiff as hell, and when you release it you damn well better be ready to go, no slip or half clutch .
my two cents, the stock is just fine for street riding
my two cents, the stock is just fine for street riding
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- wiredgeorge
-
- Offline
- User
-

Registered
- Posts: 5298
- Thanks: 46
Re: have questions need answers
06 Nov 2008 07:32
Weak springs will allow plates to slip BUT if you get new springs, even standard springs are stiffer then the original OEM springs in most cases. Never buy HEAVY DUTY springs as these will give your clutch a super-heavy feel.
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!
Mico TX
www.wgcarbs.com
Too many bikes to list!
Please Log in or Create an account to join the conversation.
- Locozuna
-
- Offline
- User
-

Registered
- Posts: 1302
- Thanks: 1
Re: have questions need answers
06 Nov 2008 11:14
Nope.. I'm with WG. Heavy duty springs are not needed. (Maybe a track bike) Don't throw away your old springs. You might want them back. I often think of putting a hydraulic on them. Hands ain't what they used to be but neither is $$$$....
KZ900LTD, KZ750LTD, KZ650, 72'Triumph Trident
"Over the Mountains
Of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride,"
The shade replied
"If you seek for Eldorado!"
"Over the Mountains
Of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride,"
The shade replied
"If you seek for Eldorado!"
Please Log in or Create an account to join the conversation.
- quader98
-
Topic Author
- Offline
- User
-

Registered
- Posts: 290
- Thanks: 1
Re: have questions need answers
06 Nov 2008 13:29
ok,i'll stay away from the hd kits,I'm not looking to race or anything like that.does the barnett kit have hd springs?it doesn't say it in the listing.i don't want to use the old parts cause with my luck I'll miss something or miss read something and have to do it over :huh: ...know what i mean.should i also get one of these
www.z1enterprises.com/detail.aspx?ID=257
thanks for the help
www.z1enterprises.com/detail.aspx?ID=257
thanks for the help
Ernie from central jersey
82 GPZ 750 R1
looking to part out my 81 KZ750E2
82 GPZ 750 R1
looking to part out my 81 KZ750E2
Please Log in or Create an account to join the conversation.
- bill_wilcox100
-
- Offline
- User
-

Registered
- Posts: 1115
- Thanks: 6
Re: have questions need answers
06 Nov 2008 14:58 - 06 Nov 2008 15:08
quader98, I installed that same Roller Clutch Push Rod Kit from Z1 last winter.
By the time I rode the bike this spring I had long forgotten the original feel.
Certainly didn't make anything worse or quirky.
Best of success.
By the time I rode the bike this spring I had long forgotten the original feel.
Certainly didn't make anything worse or quirky.
Best of success.
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Last edit: 06 Nov 2008 15:08 by bill_wilcox100.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: have questions need answers
06 Nov 2008 15:45
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
