Cylinder Head Bolts
- jmargrav
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 0
Cylinder Head Bolts
15 Nov 2008 16:25
Well I was putting my bike back together this weekend and when tightening down my head I snapped the head bolt. It was not one of the nuts that go on the studs, but one of the two head bolts. This is not the first time I have done this, yea I know should have learned my lesson, but I didn’t.
Now the manual I have says to torque them down to 22 ft lbs. But I only had my torque wrench at 10 ft lbs and they still snapped! So I was able to get the broken bolt out of the head without removing the head, but what should I be tightening these head bolts to. I did a search and found some people recommending 6 ft lbs, just to be sure, is 6 ft lbs enough? Too much?
Now the manual I have says to torque them down to 22 ft lbs. But I only had my torque wrench at 10 ft lbs and they still snapped! So I was able to get the broken bolt out of the head without removing the head, but what should I be tightening these head bolts to. I did a search and found some people recommending 6 ft lbs, just to be sure, is 6 ft lbs enough? Too much?
1982 KZ750-E3
Lariamie Wyoming GO WYO!
Lariamie Wyoming GO WYO!
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Cylinder Head Bolts
15 Nov 2008 17:02
if they are the 6mm bolts on the end of head use no more than 7.5lbs of torque.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Cylinder Head Bolts
15 Nov 2008 17:24
My 750 has three small 10mm bolts that go up from below into thre head and they look a lot more sturdy than the ones pictured. My manual specs those to torque at about 8 ft-lbs.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Cylinder Head Bolts
15 Nov 2008 18:04
Yes the manuals are sadly mistaken on torque for that bolt.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- jmargrav
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 0
Re: Cylinder Head Bolts
16 Nov 2008 14:28
Well I will have to be more carful the next time, I guess the bolts just have to hold back some oil, well thanks for confirming my suspicions.
1982 KZ750-E3
Lariamie Wyoming GO WYO!
Lariamie Wyoming GO WYO!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
