sitting 9 years engine oxidised covers???
- trianglelaguna
-
Topic Author
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
sitting 9 years engine oxidised covers???
04 Dec 2008 07:20 - 04 Dec 2008 07:22
i'm working on a rebuild for the jugs on a siezed motor and once in a while i use some brite boy chrome cleaner on a removed cover or housing spot or to see whats under the weatherd cases,covers etc..
It really looks like this motor was smooth and (low miles???)and clean before being left,, becuase of the lack of scratches and pefect surfaces i'm finding...the problem is polishing the nooks and crannies..
I was wondering if there are any products that work like the old tarnex commercials,somthing that i can dip or brush on to conteract the ox.
This man had chromed alot of stuff too,and if i'm not careful i'm ending up with faint swirl marks from my rags that need to be rubbed out ALOT...
peace craig.
I had thought originaly about plugging all the holes and having it sand/bead blasted..but it is soooo smooth underneath it all now,not wanting to screw up and all
It really looks like this motor was smooth and (low miles???)and clean before being left,, becuase of the lack of scratches and pefect surfaces i'm finding...the problem is polishing the nooks and crannies..
I was wondering if there are any products that work like the old tarnex commercials,somthing that i can dip or brush on to conteract the ox.
This man had chromed alot of stuff too,and if i'm not careful i'm ending up with faint swirl marks from my rags that need to be rubbed out ALOT...
peace craig.
I had thought originaly about plugging all the holes and having it sand/bead blasted..but it is soooo smooth underneath it all now,not wanting to screw up and all
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Last edit: 04 Dec 2008 07:22 by trianglelaguna.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: sitting 9 years engine oxidised covers???
04 Dec 2008 09:05
A member (Old Man Rock) a few weeks? months ago? did an article on polishing engine covers. It is probably in the library of past posts.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: sitting 9 years engine oxidised covers???
04 Dec 2008 09:15
toothbrush and mothers aluminum polish on aluminum stuff works good.acetone works good on chrome,non abrasive.when all else fails make like pee wee herman and rub and rub .... !:laugh:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- Alabaster
-
- Offline
- User
-

Registered
- Dallas, TX
- Posts: 37
- Thanks: 0
Re: sitting 9 years engine oxidised covers???
04 Dec 2008 10:14
What about the oil level glass hole? Mine looks like it has a little oil stuck behind it. Can it be removed and cleaned?
'07 Ducati SC1000S
'79 KZ1000
'79 KZ1000
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: sitting 9 years engine oxidised covers???
04 Dec 2008 18:17
Chrome is a "really" hard metal, and it's used on wear surfaces such as parts of hydraulic cylinders for just that reason. If you're scratching it or leaving swirl marks with rags, then it's not chrome, polished aluminum maybe, but not chrome.
KD9JUR
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
Topic Author
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: sitting 9 years engine oxidised covers???
04 Dec 2008 19:33 - 04 Dec 2008 19:34
point taken may be i used a scruby side sponge at first with the metal polish to remove the weather corrosion and went to far..or like you say maybe it was polished ..i thnik i saw some flaking but i'm not at my shop now..i'll watch closer...thanx
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Last edit: 04 Dec 2008 19:34 by trianglelaguna.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: sitting 9 years engine oxidised covers???
04 Dec 2008 20:58 - 04 Dec 2008 21:01
the plating on hydraulic cylinders is called hard chroming it goes on thick and can actually be machined unlike regular chrome plating which scratches when exposedto abrasive materials.;)hard chrome plating used to be usedto build up crankshafts back in the day for various purposes
Still recovering,some days are better than others.
Last edit: 04 Dec 2008 21:01 by PLUMMEN.
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: sitting 9 years engine oxidised covers???
05 Dec 2008 06:25'Hard chrome' is not really harder than other chrome plating, it is called hard chromium because it is thick enough that a hardness measurement can be performed on it, whereas decorative chrome plating is only millionths of an inch thick and will break like an eggshell if a hardness test is conducted, so its hardness can't really be measured directly.
www.finishing.com/faqs/chrome.html
KD9JUR
Please Log in or Create an account to join the conversation.
- kzr750r1
-
- Offline
- User
-

Registered
- Posts: 445
- Thanks: 9
Re: sitting 9 years engine oxidised covers???
06 Dec 2008 09:28
Alabaster wrote:
Nerve racking to pull and replace the seal but possible.What about the oil level glass hole? Mine looks like it has a little oil stuck behind it. Can it be removed and cleaned?
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
