KZ1100 oil pump
- geokz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
KZ1100 oil pump
21 Dec 2008 19:22
Hey out there in KZ land. Haven't had my '82 KZ1100 A2 long enough to know? Is there a different model oil pump that will give higher out put than standard. What about mods to the stocker?
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: KZ1100 oil pump
21 Dec 2008 20:08
These engines have a low oil pressure due to having a pressed together roller bearing crankshaft.
From my 1982 GPZ1100 B2 factory workshop manual"
at 30000 RPM and 140 F oil pressure is between 2.8 PSI and 3 PSI"
From my 1982 GPZ1100 B2 factory workshop manual"
at 30000 RPM and 140 F oil pressure is between 2.8 PSI and 3 PSI"
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: KZ1100 oil pump
21 Dec 2008 20:25 - 21 Dec 2008 20:27
As far as I know, there are no aftermarket pumps to increase flow volume.
I have partaken of a number of threads where some people claim you can magically improve the engine's oil delivery by changing one of the pump's drive gears.....
These threads are usually pointless and end up with some especially cruel person (usually me) asking the million dollar question:
If you can magically make the oil flow better by changing the gear ratio... why wouldn't kawasaki just change the gears?:laugh:
There are high-volume aftermarket pumps for some car engines, I know because I have used them before. Never seen such things for bikes.
I have partaken of a number of threads where some people claim you can magically improve the engine's oil delivery by changing one of the pump's drive gears.....
These threads are usually pointless and end up with some especially cruel person (usually me) asking the million dollar question:
If you can magically make the oil flow better by changing the gear ratio... why wouldn't kawasaki just change the gears?:laugh:
There are high-volume aftermarket pumps for some car engines, I know because I have used them before. Never seen such things for bikes.
1979 KZ-750 Twin
Last edit: 21 Dec 2008 20:27 by bountyhunter.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: KZ1100 oil pump
21 Dec 2008 20:43
check the clearance between the housing and gears
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: KZ1100 oil pump
21 Dec 2008 23:48
PLUMMEN wrote: 
Oh, well...
When I rebuilt my KZ 750, it had 77K miles on it so I figured the pump had to be worn. I went ahead and ordered the gears. One of the old pros told me KZ pumps don't wear unless the engine is horribly abused. Sure enough, when I got the pump out and measured the clearance it showed NO WEAR. In fact, the old parts showed less clearnce than the new gears I had just bought.....check the clearance between the housing and gears
Oh, well...
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- BSKZ650
-
- Offline
- User
-

Registered
- Posts: 2061
- Thanks: 14
Re: KZ1100 oil pump
22 Dec 2008 06:20
In addition to the above, when you increase the pressure/volume, your goning to need to increase the pan size, hence you pump more oil to the top less in the bottom,, not a good thing
77 kz650, owned for over 25 years
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
77 ltd1000, current rider
76 kz900, just waiting
73 z1,, gonna restore this one
piglet, leggero harley davidson
SR, Ride captian, S.E.Texas Patriot Guard Riders.. AKA KawaBob
Please Log in or Create an account to join the conversation.
- geokz
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
Re: KZ1100 oil pump
22 Dec 2008 12:02
Thanks for the feeds, I will just have to live with the benifits of adding a cooler will bring.
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: KZ1100 oil pump
23 Dec 2008 16:59
i have never seen a problem with the stock pump the great thing about these motors is that they don't need a lot of oil pressure because of the rollar bearing bottom end the only requirement that they have is good quailty and clean oil other than that they can pretty much take whatever you can throw at them.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
