kz 750 piston question

  • RollingStock
  • RollingStock's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 189
  • Thanks: 0

kz 750 piston question

24 Dec 2008 18:07
#254543
i plan on turboing my 83 kz750.. now my question is can i use the 810cc kit for a ZX750 E1 Turbo?
73 z1900 street nitrous drag bike(powered but honda)
83 kz750 turbo street fighter project

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: kz 750 piston question

24 Dec 2008 21:40
#254574
Yes. You should be able to use the P809B kit.

Jay

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: kz 750 piston question

25 Dec 2008 17:54
#254664
APE Jay wrote:
Yes. You should be able to use the P809B kit.

Jay

I may be wrong but I'm pretty sure the Turbo has larger wrist pins than the non Turbo, so you'd have to use the Turbo rods also (or ream out the stock ones).
KD9JUR

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: kz 750 piston question

25 Dec 2008 19:06
#254674
You are correct.

Please Log in or Create an account to join the conversation.

  • RollingStock
  • RollingStock's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 189
  • Thanks: 0

Re: kz 750 piston question

28 Dec 2008 19:21
#255155
crapers... anyone know where i can get a set of low comp pistons i can run on this motor without swaping rods or modding my stock ones?

only ones i can find ae high comp
73 z1900 street nitrous drag bike(powered but honda)
83 kz750 turbo street fighter project

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: kz 750 piston question

28 Dec 2008 19:43
#255159
There are other ways to lower compression besides pistons.

Make the combustion chamber in the head larger by re-shaping it.

Put a spacer between the case and block.

Remove material from the top of the piston (Depending on pistons)

Get a set of pistons made by JE Pistons, if you're going to do that, then give serious thought to 880cc, they cost the same.
KD9JUR

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum