KZ1000 P-19 clutch problems
- OldHippie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 24
- Thanks: 0
KZ1000 P-19 clutch problems
05 Jan 2009 13:01
Just got the bike running again... after missing a real simple problem with the plugs. My friend and I also installed a fresh clutch cable. Let the bike run for a few minutes to get warm, pulled in the clutch lever a put it in gear. The bike lurched a bit when I dropped it into gear. I released the clutch lever but the bike didn't move. Revving the rpms didn't do anything either. we're both stumped here. Any suggestions and/or ideas?
There is power in words...just don't put too many together.
my ride: KZ1000P19
my ride: KZ1000P19
Please Log in or Create an account to join the conversation.
- Locozuna
-
- Offline
- User
-

Registered
- Posts: 1302
- Thanks: 1
Re: KZ1000 P-19 clutch problems
05 Jan 2009 13:22
Go through the clutch adjustment again. Make sure you are not over riding the ramps the clutch screw adjuster uses inside the cover. This happens a lot and sometimes the books don't tell it right. Might take some fiddling. (Don't call Charlie Daniels or Jean Luc Ponty) :pinch: :pinch: :whistle:
KZ900LTD, KZ750LTD, KZ650, 72'Triumph Trident
"Over the Mountains
Of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride,"
The shade replied
"If you seek for Eldorado!"
"Over the Mountains
Of the Moon,
Down the Valley of the Shadow,
Ride, boldly ride,"
The shade replied
"If you seek for Eldorado!"
Please Log in or Create an account to join the conversation.
- Z1109R Fin
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 2
Re: KZ1000 P-19 clutch problems
07 Jan 2009 03:56
Write "Clutch adjustment" on "search forum" -box. Lots of topics there and a few regarding the infamous "3-balls-and-a-ramp" -assy thats in J-engines. It can be a bit tricky and it easily jamms clutch "open".
Z1000R ´83...Slightly modified...
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
