78 650B top end

  • jzanutto
  • jzanutto's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 214
  • Thanks: 0

78 650B top end

06 Jan 2009 12:41 - 06 Jan 2009 12:42
#256444
one piece at a time. Here's the cylinder set all done. Question is: how do the valve guide seals come out? do I just pry them out?
1978 KZ650B 2004 BMW R1150RT
Last edit: 06 Jan 2009 12:42 by jzanutto.

Please Log in or Create an account to join the conversation.

  • H2RICK
  • H2RICK's Avatar
  • Offline
  • User
  • User
    Registered
  • Is this a fun bike, or what!!!
  • Posts: 662
  • Thanks: 1

Re: 78 650B top end

06 Jan 2009 16:19
#256465
Do you mean the valve STEM seals that sit on the end of the valve guide inside the valve springs ??
If so, there is a small clip that must be removed from the seal BEFORE you try removing the seal itself. The clip is there to retain the seal on the end of the valve guide and prevent it from working its way loose.
If you look closely with a strong light at the top portion of the stem seal, you'll see the little wire clip. Once the clip is removed with a little hook-type tool, you can then remove the seal itself, although on a high mileage engine the seal will probably disintegrate because the rubber is so hard.
Be VERY careful removing the seal because it's quite easy to break off the end of the valve guide that the seal sits on/around.
KZ650C2 Stock/mint. Goes by "Ace".
H2A Built from a genuine basket case. Yes,it's a hot rod.
GT550A Stock/mint. Pleasant stroker.
2006 Bandit 1200S for easy LD rapid transit
Various H2 projects in the wings.

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: 78 650B top end

06 Jan 2009 17:01 - 06 Jan 2009 17:02
#256469
jzanutto wrote:
one piece at a time. Here's the cylinder set all done. Question is: how do the valve guide seals come out? do I just pry them out?



just wondering...who did that jug work?.....did you do it yourself?
Last edit: 06 Jan 2009 17:02 by keith1.

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: 78 650B top end

06 Jan 2009 17:53
#256473
i use 1/2" hose pliers and wiggle it back and forth and they pop right off no muss no fuss.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • jzanutto
  • jzanutto's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 214
  • Thanks: 0

Re: 78 650B top end

06 Jan 2009 18:10
#256477
yeah I do all my own work (well most of it anyway 95%)

yes I'm referring to the valve stem seals. Are they in the complete engine gasket kit?? Who should I buy a complete gasket set from??
1978 KZ650B 2004 BMW R1150RT

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 78 650B top end

06 Jan 2009 20:44 - 06 Jan 2009 20:47
#256501
Different subject, but I think you were looking for a cam chain roller guide. There's one on eBay; search "nos cam chain roller guide"

Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 06 Jan 2009 20:47 by 650ed.

Please Log in or Create an account to join the conversation.

  • jzanutto
  • jzanutto's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 214
  • Thanks: 0

Re: 78 650B top end

06 Jan 2009 21:42
#256516
thank you
1978 KZ650B 2004 BMW R1150RT

Please Log in or Create an account to join the conversation.

  • H2RICK
  • H2RICK's Avatar
  • Offline
  • User
  • User
    Registered
  • Is this a fun bike, or what!!!
  • Posts: 662
  • Thanks: 1

Re: 78 650B top end

07 Jan 2009 09:48
#256560
Athena gasket kits contain the stem seals and their overall quality is quite good. They're made in Italy.
The quality of Vesrah kits is spotty. IIRC, they also include the stem seals in their kits. They're made in Taiwan.
There is also an outfit called Cometic making gasket sets but I have never used their stuff so can't comment on their quality or scope of supply in their kits. I'm not positive but I believe they're made in Europe somewhere.
KZ650C2 Stock/mint. Goes by "Ace".
H2A Built from a genuine basket case. Yes,it's a hot rod.
GT550A Stock/mint. Pleasant stroker.
2006 Bandit 1200S for easy LD rapid transit
Various H2 projects in the wings.

Please Log in or Create an account to join the conversation.

  • jzanutto
  • jzanutto's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 214
  • Thanks: 0

Re: 78 650B top end

07 Jan 2009 10:46
#256566
I've seen anywhere from 50 dollars to 85 for the "complete set"
1978 KZ650B 2004 BMW R1150RT

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: 78 650B top end

07 Jan 2009 13:22
#256578
jzanutto wrote:
yes I'm referring to the valve stem seals. Are they in the complete engine gasket kit??
Sometimes they do..... sometimes they just say they do and leave you scrambling to find some when the gasket set arrived and you find out THEY LIED...... cough... cough....(ATHENA!)..... cough.......

jzanutto wrote:
Who should I buy a complete gasket set from??
Try Z1 enterprises. If no luck there, Old Bike Barn is a good source. Fleabay has them quite often.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: 78 650B top end

07 Jan 2009 13:48
#256584
jzanutto wrote:
yeah I do all my own work (well most of it anyway 95%)

yes I'm referring to the valve stem seals. Are they in the complete engine gasket kit?? Who should I buy a complete gasket set from??



nice job!!

Please Log in or Create an account to join the conversation.

  • Injected
  • Injected's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1838
  • Thanks: 1283

Re: 78 650B top end

08 Jan 2009 11:01
#256718
If your looking for the best valve guide seals try APE...
the 900/1000 ones will fit and I can tell you that they do not leak oil - they are a better design than OEM and they are thicker so they do not deform over time.
1978 KZ650B2 w 1197cc Z1 engine
1977 KZ650B1 w 750cc Spectre engine
1979 KZ650C3 w 831cc Hot Rod engine
1978 KZ650C2 w 762cc DFI project
1977 KZ650C1 stock restoration project
1978 KZ650B2 modified project


Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum