Andrews 2X cams question

Does anyone know if Andrews 2X cams have stock base circles? I searched and googled but haven't found this spec. Looking at cam options for my 1015 10:25 to 1 street motor. Thanks.

YES 2X are a direct drop in. Lift.360 Duration 258* Intake 23/55 Exhaust 55/23 they will give a mild boost to any stock 900 or 1000 pre 1979.

Here's some info on your cams.

www.andrewsproducts.com/PDF_files/KZ900-1.pdf

Thanks. I saw those specs but I see nothing that gives the base circle dimensions. Am I missing something?

they stay with the stock base circle until they get in to the really radical cam profiles the stock base circle measurement is 1.10 inch the only time that might change is if the cams are regrinds. but i'm pretty sure andrews cams weren't regrinds and i know for a fact web cams are not either.

I have a set sitting right in front of me and yes they are stock. The only reason that a cam manufacturer would change the base circle from stock, would be to shrink it and therefore be able to increase the lift range. This is only done on cams which are more than .440 lift.

Thanks a lot for confirming for me.