Valve cover gasket replacement

  • fredgarvin42
  • fredgarvin42's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Valve cover gasket replacement

21 Feb 2009 11:33
#266825
I'm sure one of you knows the proper method to do this and since I'm unclear, hopefully the gods will know.

I'm going to replace my valve cover gasket and cam ends today I am unsure of what to use for sealant, if any. On cars I would typically install valve cover gaskets dry or with a light coating of gaskacinch (spelling?) but this is not a car so I figured I'd run this up the flagpole.

Also, any do's and dont's on the cam end pieces? Should I use red,blue, or no thread locker upon reassembly?

Thanks in advance!!!!

Peace
1980 LTD 1000
1985 Ninja 600
1984 YZ 490

Austin,TX

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: Valve cover gasket replacement

21 Feb 2009 11:47
#266829
you dont need locktight on the cover bolts and a "thin" bead of liquid gasket on the end plugs can be used
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Valve cover gasket replacement

21 Feb 2009 11:59
#266834
put the valve cover on dry and no loctite needed
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Valve cover gasket replacement

21 Feb 2009 12:13
#266836
I've read/heard if the valve cover gasket is sprayed with a non stick cooking spray(like Pam) it will be able to be reused many times.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: Valve cover gasket replacement

21 Feb 2009 16:07
#266870
According to my FSM, the rubber plugs require sealant. Optional on the gasket, I use it across the tops of the plugs as they like to leak at the corners.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • fredgarvin42
  • fredgarvin42's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: Valve cover gasket replacement

22 Feb 2009 16:29 - 22 Feb 2009 18:45
#267250
Thanks!!!

OK. Swapped the gasket and seals with a little goo on the seals. I'm sure it will hold but now it has an exhaust leak on both sides of the valve cover...joy. Are the Exhaust recirculation devices interchangeable? I didn't note which side each one came from when I reinstalled them.
1980 LTD 1000
1985 Ninja 600
1984 YZ 490

Austin,TX
Last edit: 22 Feb 2009 18:45 by fredgarvin42. Reason: icon thingy

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum