High compression for the street
- Knight Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 27
- Thanks: 0
High compression for the street
03 Mar 2009 20:07 - 03 Mar 2009 20:08
The Knight Rider wants to run 1200 13.5 to 1 pistons on the street, I know in a perfect world that 10.25 to 1 would probably be better,but school teacher gave me permission to thrash his MTC. pistons. I do have a big oil cooler and plan on running raceing gas,110 or above octane, as long as i stay out of traffic jams can i get away with this set up on the street, or will it be a major major headache. Thanks in advance for any feedback. P.S. ported head, 435cams welded crank,ect,ect.
1976 kz900 1075 435 cams ported head sidewinder
Last edit: 03 Mar 2009 20:08 by Knight Rider.
Please Log in or Create an account to join the conversation.
- donthekawguy
-
- Offline
- User
-

Registered
- Posts: 1911
- Thanks: 8
Re: High compression for the street
04 Mar 2009 00:35
As long as you stay away from red light and use the right gas you should be ok.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: High compression for the street
04 Mar 2009 03:49
ive done it several times,unless you spend majority of time street racing in alaska id suggest 9:1-10.25:1 with smaller cams.the motor your describing makes real power from around 6000 up depending on your carbs
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- wiredgeorge
-
- Offline
- User
-

Registered
- Posts: 5298
- Thanks: 46
Re: High compression for the street
04 Mar 2009 06:16 - 04 Mar 2009 06:16
Talking in the 3rd person isn't a good sign either.
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!
Mico TX
www.wgcarbs.com
Too many bikes to list!
Last edit: 04 Mar 2009 06:16 by wiredgeorge.
Please Log in or Create an account to join the conversation.
- School Teacher
-
- Offline
- User
-

Registered
- Posts: 381
- Thanks: 0
Re: High compression for the street
04 Mar 2009 09:02
wiredgeorge wrote:
The Knight rider doesn't know what third person is do ya.
hahahahahahahahahahahahahah!hehehehehehehe!Talking in the 3rd person isn't a good sign either.
The Knight rider doesn't know what third person is do ya.
1976 kz900 in parts but will be going some day soon
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
Please Log in or Create an account to join the conversation.
- School Teacher
-
- Offline
- User
-

Registered
- Posts: 381
- Thanks: 0
Re: High compression for the street
04 Mar 2009 09:08
PLUMMEN wrote:
you've done it several times and then burnt up your engine?
what were the results?
ive done it several times,unless you spend majority of time street racing in alaska id suggest 9:1-10.25:1 with smaller cams.the motor your describing makes real power from around 6000 up depending on your carbs
you've done it several times and then burnt up your engine?
what were the results?
1976 kz900 in parts but will be going some day soon
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: High compression for the street
04 Mar 2009 10:37
ive run several 1170s with 13:1 pistons and bigger cams than those on the street like i said they pull like like a freight train from around 6000 rpms on up,but they tend to be tempermental dogs in the lower rpms .the 1197 in my 74 z1 im building the 1385 for was a 13:1 motor with some head work was a psychotic bitch to ride and you sure as hell didnt want to spend lots of time idling in hot weather with it.once i put smaller cams i think they are around 410s in that motor now and a set of 29s in place of 33s( i also used 28s on that motor for a while)it turned into a lot more streetable motor that was still too much for stock chassis but atleast it was predictable!:laugh: if you want to run really good fuel the higher compression is fine,but youre also limiting your cruising range to where you can get good fuel,you can pull timing out of it to make it run on cheap gas but then youre gonna have overheating problems thats why im leaning towards big inch lower compression stumppulling motors these days.
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: High compression for the street
04 Mar 2009 10:40
just in case you were wondering ive had some experiance with really big hp motors and there affect on stock frames!:laugh:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- School Teacher
-
- Offline
- User
-

Registered
- Posts: 381
- Thanks: 0
Re: High compression for the street
04 Mar 2009 12:48
when do you need to start bracing the frame? 1200? 1300+?
1976 kz900 in parts but will be going some day soon
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: High compression for the street
04 Mar 2009 14:05
its more of a hp thing than cc's especially on a z1 theyre pretty flimsy with a stock motor once you start getting aound 100 hp i think some sort of beefing is a really good idea.the blue z1 is getting a 1385 turbo stuffed in it so i went a little crazy with the bracing on it.
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- School Teacher
-
- Offline
- User
-

Registered
- Posts: 381
- Thanks: 0
Re: High compression for the street
04 Mar 2009 14:50
ok thanks plummen.
1976 kz900 in parts but will be going some day soon
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
1980 kz1000G1
1976 kz900 parts bike
1979 kz1000 shaftie parts bike
1978 kz1000 33mm smoothies 1075 kit
Troutdale Oregon USA
Please Log in or Create an account to join the conversation.
- Knight Rider
-
Topic Author
- Offline
- User
-

Registered
- Posts: 27
- Thanks: 0
Re: High compression for the street
04 Mar 2009 14:56
PLUMMEN wrote:
So could Knight Rider lower the compression by adding a copper base gasket? Any problems with this? How thick would Knight Rider go?
Knight Rider talks about himself in the Nth dimension not third person!
ive done it several times,unless you spend majority of time street racing in alaska id suggest 9:1-10.25:1 with smaller cams.the motor your describing makes real power from around 6000 up depending on your carbs
So could Knight Rider lower the compression by adding a copper base gasket? Any problems with this? How thick would Knight Rider go?
Knight Rider talks about himself in the Nth dimension not third person!
1976 kz900 1075 435 cams ported head sidewinder
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
