Tach Seal - Can't Remove

  • HerrDeacon
  • HerrDeacon's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 642
  • Thanks: 1

Tach Seal - Can't Remove

10 Mar 2009 18:35
#271031
I'm trying to replace the tach seal in my '78 KZ650 D1 but I'm having a very difficult time getting the old one out. I have been using a dental pick and have removed most of the rubber but there is still the metal sleeve in there and it won't budge. Any tips on how to get this out? I don't want to mar the finish on the inside of the tach housing.

I'm thinking there is rubber between the housing and the metal sleeve and it's hardened and fused to the housing :(

Thanks

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Tach Seal - Can't Remove

10 Mar 2009 19:11
#271050
use a pin punch and hammer and drive it out from the inside out the main body of the seal is metal and the seal has an interferance fit in the tach drive
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Tach Seal - Can't Remove

10 Mar 2009 19:28
#271066
It's easiest if you pull the cylinder head cover. Then you can get to the tach gear guide and O-ring and push it out from behind. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Tach Seal - Can't Remove

10 Mar 2009 19:38
#271070
you dont need to pull the valve cover just pop out the tach drive and when you are putting it back in use a no 8 robertson screw driver in the tach drive it self to manuveor the drive gear so that it lines up with the drive gear on the cam
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • HerrDeacon
  • HerrDeacon's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 642
  • Thanks: 1

Re: Tach Seal - Can't Remove

11 Mar 2009 02:59
#271118
Actually I have the whole head off the bike and so the tach drive is totally removed from the head. I'm referring to the oil seal within the guide that the tach gear goes through. The one you can see from the outside of the engine where you connect the cable.

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4277
  • Thanks: 10

Re: Tach Seal - Can't Remove

11 Mar 2009 16:25
#271223
yes that is the one take a pin punch and drive it out it will be ok.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE

Please Log in or Create an account to join the conversation.

  • HerrDeacon
  • HerrDeacon's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 642
  • Thanks: 1

Re: Tach Seal - Can't Remove

11 Mar 2009 17:39
#271233
Ok, I'll try that, thanks timebomb.

Please Log in or Create an account to join the conversation.

  • sft1662
  • sft1662's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 130
  • Thanks: 0

Re: Tach Seal - Can't Remove

12 Mar 2011 16:37 - 12 Mar 2011 19:52
#437472
...Crap, I wish I had read this thread a couple hours ago

I just replaced my tach seal and noticed that it seemed way bigger than the one that was in there before (which was hardened and came out in a number of pieces). There was a metal ring that was in there and I could not tell if it was part of the housing, or a washer or something. It seemed to be practically welded to the sides of the housing. I ended up leaving it in there because I didnt want to ruin the whole unit. Sounds like it was part of the old seal... It looked like a rusted old washer between an O-ring and the seal...

When I put the new seal in I had to hammer it in using a socket and it didnt fit very well (obviously, because that metal ring was still in there!) I thought maybe it was just a different size. The worst that can happen is it starts leaking again right? Or can it possibly bind the tach drive gears or something if its TOO tight? I feel like an idiot now.
1978 KZ650 B2A
Last edit: 12 Mar 2011 19:52 by sft1662. Reason: oopadoops

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum