solved ordered gasket..71mm cometic 50$

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

solved ordered gasket..71mm cometic 50$

21 Mar 2009 21:20 - 22 Mar 2009 06:15
#274069
i got my rings in the jugs tonight and realized..i had a gasket kit (versah)from a bulk purchase and had not anticapated buy ing a head gasket extra cuase of the 69.5 piston kit that is going onto my stock z-1 extra motor.....the h-gasket in the versah kit measures 68.5 and i can feel a lip sitting over the bore when i lay it on the top of the cylinders....too small diameter??????i know this is a dumb question ...humor me ...what size head gasket should i run with a 69.5 mm piston....where would be some places online to shop a good h-gskt...thanks guys...craig...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Last edit: 22 Mar 2009 06:15 by trianglelaguna.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:22
#274071
got the jugs on by keeping the center set proped up and useing tiny flatheads to work the rings in .....
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:24
#274072
these are the wiseco's and the kit pistons are 69.5...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:27
#274073
it was fun trying to learn which rings would need to get pried in .....but once i got it down .....no problem....took me a little while ...30 minutes...but it was my first time...not counting when i gave up last month ....
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:28 - 21 Mar 2009 21:29
#274074
this should be the jugs sitting on photo
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Last edit: 21 Mar 2009 21:29 by trianglelaguna.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:30 - 21 Mar 2009 21:31
#274075
try again....edit....i'll find it...this instead is the second set getting ready to rotate up and get the rings in...first set is almost in
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Last edit: 21 Mar 2009 21:31 by trianglelaguna.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:34
#274076
get this motor done and put aside as a back up for my 900 and i can start on this one as retro 80's superbike
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: 69.5 mm wiseco kit ???head gasket 68.5 stock???

21 Mar 2009 21:42
#274078
81 kz1000 j model motor
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: solved...ordered 71mm cometic...no prob

21 Mar 2009 21:48 - 21 Mar 2009 23:28
#274080
ok sorry about all the posts but ...pictures are a good deal around here.....NOW....please someone smarter than me gimme an amswer.....

what size head gasket goes with a 1045 kit(69.5)???

also ...please....where is the best place to order one...p.m me if you need to so as not to break a rule i guess ....kinda silly if directing a guy to a source is rule bending but oh well.......really wanna get this thing torqued and buttoned up...so i can use my bench to mount my new avon roadriders that are in the mail.......riding is bitchen here right now!!!!!!
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Last edit: 21 Mar 2009 23:28 by trianglelaguna.

Please Log in or Create an account to join the conversation.

  • Buda
  • Buda's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 381
  • Thanks: 0

Re: solved...ordered 71mm cometic...no prob

22 Mar 2009 06:37
#274178
I dont think directing a guy to a source is aganst the rules as long as the person directing is not directing you to their business. I hope not anyway because as a newbe I had no idea where to find alot of the parts I needed untill I found this site.
Tom
1982 KZ 1170 LTD
10.25 to 1 comp
K&N pods
GPZ cams
Vance&Hines pipe with comp baffle
dyna coils and wires
97 Valkyrie Standard

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: solved...ordered 71mm cometic...no prob

22 Mar 2009 08:40
#274209
I saw recently that the Wiseco PDF they have on their site lists a Wiseco part number for a base gasket as well as a head gasket/etc.

www.wiseco.com/Catalogs/Powersports/Kawa...leStreetOverbore.pdf

Page 6 of the PDF (labeled page 69, not sure why).

Wiseco part # W5380.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: solved...ordered 71mm cometic...no prob

22 Mar 2009 11:52
#274246
look at Z1E,APE,FBgast, Cometic. lots of places will have the 1045 gasket. they likly all come from Cometic.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum