Stupid question, please help a dumb guy out!
- Pro_window78
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Stupid question, please help a dumb guy out!
26 Mar 2009 09:24
I just got a new points housing for my kz1000 78 model a2 (thanks buzz!!) Any way my question is regarding the seal. I assume it's the crank seal. I am seriously hoping it just pops on and I won't need to split the cases. Am I correct? Any expertise would be appreciated. - Ryan
Please Log in or Create an account to join the conversation.
- gane
-
- Offline
- User
-

Registered
- Posts: 706
- Thanks: 1
Re: Stupid question, please help a dumb guy out!
26 Mar 2009 12:56
Ryan, seal in question is indeed, crank/points seal, no bigggie, simply installs from inside of points cover housing. I like to goop w/ assy lube, and make sure lip stays true to crank w/install.G
[img][/img] 1977 KZ1000A1
Please Log in or Create an account to join the conversation.
- Pro_window78
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Please Log in or Create an account to join the conversation.
- KruZer
-
- Offline
- User
-

Registered
- Posts: 118
- Thanks: 0
Re: Stupid question, please help a dumb guy out!
26 Mar 2009 15:47
Ryan,
You're welcome.
There is no seal on the crank or in the engine.
The seal in the cover keep the oil where it belongs.
The seal in the cover is pretty new and you shouldn't have to replace it.
Just take your old cover off, install a new gasket and install the new cover.
NOTE:
It looks like the gasket will fit either way but it won't. the gasket only goes on one way so be careful.
Buzz
You're welcome.
There is no seal on the crank or in the engine.
The seal in the cover keep the oil where it belongs.
The seal in the cover is pretty new and you shouldn't have to replace it.
Just take your old cover off, install a new gasket and install the new cover.
NOTE:
It looks like the gasket will fit either way but it won't. the gasket only goes on one way so be careful.
Buzz
*1977 1000, 1975 KZ998 LSR bike.
Please Log in or Create an account to join the conversation.
- Pro_window78
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Re: Stupid question, please help a dumb guy out!
26 Mar 2009 18:34
Crap, I didn't think about the gasket. I guess I better get a new one, or are those reuseable?
Please Log in or Create an account to join the conversation.
- KruZer
-
- Offline
- User
-

Registered
- Posts: 118
- Thanks: 0
Re: Stupid question, please help a dumb guy out!
26 Mar 2009 18:51
Whether or not you can reuse the original gasket depends on the condition of the gasket and if comes off of the current housing without being damaged.
If the gasket comes off of the old housing in one piece and looks to be okay then put some sealer on it and use it again.
Make sure you notice how the original housing comes off of the bike and put the newer housing back on the same way.
The small slot on the housing goes on the bottom so the ignition leads can route out under the bottom of clutch housing.
Good luck,
Buzz
If the gasket comes off of the old housing in one piece and looks to be okay then put some sealer on it and use it again.
Make sure you notice how the original housing comes off of the bike and put the newer housing back on the same way.
The small slot on the housing goes on the bottom so the ignition leads can route out under the bottom of clutch housing.
Good luck,
Buzz
*1977 1000, 1975 KZ998 LSR bike.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- Pro_window78
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Re: Stupid question, please help a dumb guy out!
28 Mar 2009 21:13
Thanks for all the help guys, this is an awesome site!! Btw, Will I need to drain the oil for this install? I just changed it and the filter so If so I want to maybe take a couple more rides on it and change it all on a rainy day. Thanks gentlemen! -Ryan
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Stupid question, please help a dumb guy out!
28 Mar 2009 21:14
put it on the side stand and change away you should be able to do it with no oil gusing out.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- Pro_window78
-
Topic Author
- Offline
- User
-

Registered
- Posts: 85
- Thanks: 0
Re: Stupid question, please help a dumb guy out!
28 Mar 2009 21:20
Nice, thats exactly what I was hoping you would say!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
