GPZ 750 1982 starts only when using ether ! Help
- Sylvain2009
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
GPZ 750 1982 starts only when using ether ! Help
10 Apr 2009 17:24
:huh: Any idea what is causing this ? I measured the compression in cold and warm condition and found all cylinders above 120 psi before and after warming up. Visually, spark is good, I get a spark to jump 1/4 inch across from plug to engine block on each of the 4 ignition wires.
- I had this starting problem in 2007 but only on a very cold day, say in September around 10 deg F.
- Last year it got chronic and prevented me from using the bike. I had to shoot ether in the intake to start the bike every time and it would not start well normally even 1 hour after turning it off.
- This year, I had to use ether again, warmed it up 3 minutes and turned it off. About 5-10 minutes later it would again not start without ether. What a drag and what a mystery. The bike performs really well once it is started.
Fuel set-up has never changed, although I believe the petcock for the tank is a Suzuki part. There is a vacuum line to the carb manifold that turns on the petcock flow except when the petcock is in prv position, at which position the fuel flows freeley without engine vacuum.
- I had this starting problem in 2007 but only on a very cold day, say in September around 10 deg F.
- Last year it got chronic and prevented me from using the bike. I had to shoot ether in the intake to start the bike every time and it would not start well normally even 1 hour after turning it off.
- This year, I had to use ether again, warmed it up 3 minutes and turned it off. About 5-10 minutes later it would again not start without ether. What a drag and what a mystery. The bike performs really well once it is started.
Fuel set-up has never changed, although I believe the petcock for the tank is a Suzuki part. There is a vacuum line to the carb manifold that turns on the petcock flow except when the petcock is in prv position, at which position the fuel flows freeley without engine vacuum.
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Re: GPZ 750 1982 starts only when using ether ! Help
10 Apr 2009 18:03
Check your valve clearances.
Please Log in or Create an account to join the conversation.
- anarki650
-
- Offline
- User
-

Registered
- Posts: 683
- Thanks: 5
Re: GPZ 750 1982 starts only when using ether ! Help
10 Apr 2009 18:05
+1 on valve clearances. Also, how old are you plugs?
09 Kawasaki ER6n
77 kz650b1 cafe rebirth project
"Being shot out of a cannon will always be better than being squeezed out of a tube, that's why God made fast motorcycles..."
Dr. Hunter S. Thompson
Omaha NE
77 kz650b1 cafe rebirth project
"Being shot out of a cannon will always be better than being squeezed out of a tube, that's why God made fast motorcycles..."
Dr. Hunter S. Thompson
Omaha NE
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
