Valve Clearances Changed after Cleaning Head
- HerrDeacon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 642
- Thanks: 1
Valve Clearances Changed after Cleaning Head
13 Apr 2009 15:48
Before I put the bike away for the winter I checked my valve clearances and the exhaust were all within spec and the intakes all a bit tight. So I ordered the correct shims, but in the meantime I removed the head and cleaned everything up (combustion chamber and valves).
Now that everything is back together I rechecked them and now one of the exhaust clearances is tight and one of the intakes is still tight. I don't really mind the intake because it could be my fault in ordering the wrong size shim, but I'm wondering about the exhaust one. Would cleaning everything up possibly change the clearance? I guess some carbon could have affected the gap before it was all cleaned up.
No big deal, I'll just get the correct size shims but was wondering if it was common for this to happen?
Now that everything is back together I rechecked them and now one of the exhaust clearances is tight and one of the intakes is still tight. I don't really mind the intake because it could be my fault in ordering the wrong size shim, but I'm wondering about the exhaust one. Would cleaning everything up possibly change the clearance? I guess some carbon could have affected the gap before it was all cleaned up.
No big deal, I'll just get the correct size shims but was wondering if it was common for this to happen?
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
-

Registered
- Posts: 7983
- Thanks: 104
Re: Valve Clearances Changed after Cleaning Head
13 Apr 2009 17:00
yep thats why you never order rings/bearings or any major parts before cleaning things up first.
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: Valve Clearances Changed after Cleaning Head
13 Apr 2009 17:07
on higher mileage engines it is comman for carbon to build up on the valve face and on the valve seat when you clean it up the you will tighten up the clearances. shouldn't be anything to worry about now if the clearances loosened up i'd be concerned
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
- HerrDeacon
-
Topic Author
- Offline
- User
-

Registered
- Posts: 642
- Thanks: 1
Re: Valve Clearances Changed after Cleaning Head
13 Apr 2009 18:34
Thanks guys for the explanation, figured it must have been that. I hate finding something and not knowing the cause.
Please Log in or Create an account to join the conversation.
- cornhappy
-
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: Valve Clearances Changed after Cleaning Head
13 Apr 2009 19:08
Loose valve cclearances are noisy, tight clearances burn valves. If I had to choose between loose and tight I'd go with loose. If you have no valvetrain noise but your valve clearances are loose, let it be.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Valve Clearances Changed after Cleaning Head
13 Apr 2009 21:07
HerrDeacon wrote:
It's because garbage can accumulate on the valve so that it doesn't close fully. Clean that off and the valve setas and he clearance tightens up. Been there, seen that.
\Before I put the bike away for the winter I checked my valve clearances and the exhaust were all within spec and the intakes all a bit tight. So I ordered the correct shims, but in the meantime I removed the head and cleaned everything up (combustion chamber and valves).
Now that everything is back together I rechecked them and now one of the exhaust clearances is tight and one of the intakes is still tight. I don't really mind the intake because it could be my fault in ordering the wrong size shim, but I'm wondering about the exhaust one. Would cleaning everything up possibly change the clearance? I guess some carbon could have affected the gap before it was all cleaned up.
No big deal, I'll just get the correct size shims but was wondering if it was common for this to happen?
It's because garbage can accumulate on the valve so that it doesn't close fully. Clean that off and the valve setas and he clearance tightens up. Been there, seen that.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
