***911***** NEED SOME HELP ON THIS ONE!
- Darkangel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 337
- Thanks: 0
***911***** NEED SOME HELP ON THIS ONE!
13 Apr 2009 20:29
Ok...I just did a custom handle bar build today...and I cut my cables to the length that i needed them on the clutch, right on the perch handle...I figured i would use a cable stop from autozone, drill out the hole, and then install the cable. Well that worked, but now...it keeps sliding out, reguardless of how much I screw the cable down in the stop...So what Do I do....
_________________________________________
1983 Kawasaki KZ 1100 A2 - streetfighter
1983 Kawasaki KZ 1100 A2 - streetfighter
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: ***911***** NEED SOME HELP ON THIS ONE!
13 Apr 2009 20:43
Can you double the end of the cable and then possibly tighten it down? This is an old trick used in electrical crimp on terminals if they come off the wire after crimping.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- Darkangel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 337
- Thanks: 0
Re: ***911***** NEED SOME HELP ON THIS ONE!
13 Apr 2009 20:50
double the end of the cable..how...it is in side of the perch handle...The other way I can double it is too insert a screw on the other side...but i would have to cut it off...i might be able to use some solder....The is a brass cable stop..the screw...is probably aluminum or something..Solder will stick to steel wont it...or what else could i do?
_________________________________________
1983 Kawasaki KZ 1100 A2 - streetfighter
1983 Kawasaki KZ 1100 A2 - streetfighter
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: ***911***** NEED SOME HELP ON THIS ONE!
13 Apr 2009 20:51
Another thought, most hobby shops and some hardware stores sell the K&S brand of metal tubing and sheets. They come in many diameter and are very inexpensive; buy some brass tubing to fit the cable,cut to fit your needs and have the tubing act like a shim to tighten down on the cable.
If that won't work maybe some custom cables will have to be made. www.motionpro.com is one place and www.barnett.com is another.
Here's another website for cables:
www.flandersco.com/FlanCableSearch.html
If that won't work maybe some custom cables will have to be made. www.motionpro.com is one place and www.barnett.com is another.
Here's another website for cables:
www.flandersco.com/FlanCableSearch.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- Darkangel
-
Topic Author
- Offline
- User
-

Registered
- Posts: 337
- Thanks: 0
Re: ***911***** NEED SOME HELP ON THIS ONE!
13 Apr 2009 21:47
looking at the fladers site....would you know what I need to make my own custom cables...Because that would probably be the best bet..But still how do they put on the ends...
_________________________________________
1983 Kawasaki KZ 1100 A2 - streetfighter
1983 Kawasaki KZ 1100 A2 - streetfighter
Please Log in or Create an account to join the conversation.
- timebomb33
-
- Offline
- User
-

Registered
- Posts: 4277
- Thanks: 10
Re: ***911***** NEED SOME HELP ON THIS ONE!
14 Apr 2009 00:05
the cable ends are usally drilled thru then the cable is fed thru the hole and flattened out and then it is soldered over. and the excess is ground or filed off.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
I THINK MY POWERBAND BROKE
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
