77 KZ750 twin
- cheezewhiz6
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1
- Thanks: 0
77 KZ750 twin
15 Apr 2009 10:38
Iam new to this forum, Hello from ohio. I just aquired a 77 kz750 twin from my uncle and it runs but not past 3000 rpm. The points are brand new but i dont know if they are set right. any help or suggestions are greatly appreciated.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: 77 KZ750 twin
15 Apr 2009 12:36
This is a website covering most if not all of the Kawasaki twin engined bikes:
www.armbell.com/forum/index.php?mforum=kz400
www.armbell.com/forum/index.php?mforum=kz400
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 77 KZ750 twin
15 Apr 2009 14:21
From the manual on my 79 KZ750 twin:
The point gap needs to be .012" - .016". Check timing with light: at idle, the timing mark and the "F" must align. At over 3000 RPM, the timing mark and the pair of lines align.
You should take the advancer mechanism off and clean and lube it, they are notorious for sticking.
The point gap needs to be .012" - .016". Check timing with light: at idle, the timing mark and the "F" must align. At over 3000 RPM, the timing mark and the pair of lines align.
You should take the advancer mechanism off and clean and lube it, they are notorious for sticking.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
